Bedienungsanleitung Gaggenau VI482111 (Seite 19 von 28) (Englisch)

702925

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Timer functions

Setting procedure

Select the appropriate temperature level from the table.

Set an empty item of cookware down on the cooking

zone.

1 Use the control knob to select the temperature

setting you require. Temperature settings 1 to 5 are

available for this function; see temperature settings

table.

2 Touch the Ú symbol; it will be lit orange.

‘ and the temperature setting you have selected

will be lit.

The function has now been activated.

The ¬, « or ª temperature indicator and the

temperature setting you have selected will remain lit

until the frying temperature has been reached. An

audible signal will then sound and the temperature

indicator will go out.

3 Once the frying temperature has been reached, add

the fat and then the food to the pan.

Notes

– If a temperature setting above 5 is selected,

setting † will automatically be set. In this case, turn

the control knob to position 5.

– Turn the food so that it does not burn.

Switching off the frying sensor

Turn the control knob that was used to select the

temperature to position 0. The hotplate will switch off

and the residual heat indicator will appear.

Locking the control panel for cleaning

Wiping over the control panel while the hob is switched

on may alter the settings. To avoid doing this, you can

use the hob's "Lock control panel for cleaning" function.

To switch on: Touch the − symbol. An audible signal

will sound. The indicators for the active functions will

flash. The control panel will be locked for 10 minutes.

You will now be able to clean the surface of the control

panel without altering the settings.

To switch off: Touch the − symbol again within the next

10 minutes.

If the function is not deactivated within these 10

minutes, the hob will switch itself off.

Notes

– The locking function does not affect the control

knobs.The hob can be switched off at any time.

– While the locking function is active, the power

supply to the hob is disconnected. The hotplates

may still be hot.

Automatic safety switch-off function

For your protection, the appliance features a safety

switch-off function. Depending on which heat setting

has been selected, the hotplate's heating element will

be deactivated if no further action is performed within a

set time after selecting the heat setting.

An audible signal will indicate when this time has

elapsed. The control knob is active and the illuminated

ring around it will flash. ”‰ will be lit on the hotplate

display.

Turn the control knob to position 0. The appliance can

now be switched back on as usual.

 

Heat setting Deactivated after

‚

10 hours

ƒ to …

5 hours

† to ˆ

4 hours

‰

3 hours

Š to ‚‹

2 hours

‚‚ to ‚ƒ

1 hour

Frying sensor temperature setting Deactivated after

‚ to †

3 hours

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau VI482111 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau VI482111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info