Bedienungsanleitung Gaggenau VR414111 (Seite 9 von 52) (Englisch, Portugiesisch, Spanisch)

760899

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

en Before using the appliance for the first time

Visual signals of the luminous disc

The control knob is encircled by an illuminated ring that

indicates a number of statuses and functions.

Accessories

As standard, your appliance comes with the following

accessories:

Special accessories

You can order the following special accessories from

your specialist dealer:

Only use the accessories as specified. The

manufacturer accepts no liability if these accessories

are used incorrectly.

Before using the appliance for the

first time

Before using the appliance for the fi rst ti me

In this section, you can find out what you must do

before using your appliance to prepare food for the first

time. Read the safety information before you start.

Cleaning the appliance

Before using the appliance and accessory parts for the

first time, clean them thoroughly with lukewarm soapy

water.

Heating the grill

1Remove the lava stones from the film and place

them in the lava stone tray.

2Fold both grill elements downwards. The grill

elements must lie flat.

3Place the wire rack on top and heat the grill for a

few minutes at grill setting 12. This will get rid of

the new-appliance smell and any contamination.

Indicator Meaning

ÛOff Appliance off

Ú Lit continuously orange Appliance on

ˆFlashing orange Appliance off

Residual heat indicator

ˆFlashing orange and white

alternately

Safety shut-off, power

failure

ˆFlashing yellow and

magenta alternately

Appliance fault

Call the after-sales service.

Ú Lit green and then yellow

for some seconds

Appliance initialising,

only after first installation or

power failure

Lava stones

Cast iron roasting pan

Cleaning brush

VA 461 000 Cast iron roasting pan

LV 030 000 Lava stones (replacement)

Operating the appliance en

Operating the appliance

Switching on

The two grill elements can be controlled separately. This

means that you can grill foods that require different

temperatures at the same time. If required, you can

connect the two grill elements together and set the

same grill setting at the same time for both of them.

Push in the control knob and turn it to the required grill

setting. If you do not want to cook across the entire grill

zone, switch on the front or rear grill element only.

The illuminated rings behind the control knobs flash

while the appliance is heating up. Once the food

reaches the selected grill setting, the illuminated rings

light up. The preheating phase at grill setting 12 takes

approximately 15 minutes.

Connecting the grill elements

Note: The two grill elements can be controlled at the

same time using a control knob.

1Push in any control knob and turn it to the

g position.

2Turn other control knob to the required grill setting.

This grill setting is applied for both grill elements.

The illuminated rings behind the control knobs flash

while the appliance is heating up. Once the food

reaches the selected grill setting, the illuminated

rings light up. The preheating phase at grill

setting 12 takes approximately 15 minutes.

3Only put the food in the grill once it has finished

preheating.

To control individual grill elements again, turn the

control knob from the g position to any of the grill

settings.

Switching off

Turn the control knobs to 0.

mWarning – Risk of burns!

When the appliance cover is closed, this leads to a

build-up of heat. Only operate or switch on the

appliance when the appliance cover is open. Do not use

the appliance cover for keeping warm or setting down.

Only close the appliance cover once the appliance has

cooled down.

Caution!

Damage to the appliance

Remove spilled liquids before opening the appliance

cover.

Residual heat indicator

The luminous discs behind the control knobs flash after

switching off, to indicate that the appliance has still not

cooled down to such an extent that it can be touched

safely.

Overheating protection

To protect the appliance and the furniture, the grill

switches the heating elements off automatically when

overheated. After having cooled down, the appliance

switches on again.

Using the cast iron roasting pan

The cast iron roasting pan is ideal for preparing finely

chopped food, liquids, vegetables, desserts and egg-

based dishes.

The cast iron roasting pan is placed on the rear grill

element once you have removed the wire rack from it.

You can grill other food on the front wire rack at the

same time.

Additional cast iron roasting pans can be ordered as

optional accessories from your specialist retailer.

Note: Leave the lava stone tray and the lava stones in

the grill, even when using the cast iron roasting pan.

How to grill using the cast iron roasting pan

1Remove the rear wire rack.

2Carefully place the cast iron roasting tray onto the

rear grill element.

3Turn the control knob for the rear grill element to

the required grill setting.

4Wait until the preheating has ended and the

illuminated ring behind the control knob lights up

permanently.

5Lightly brush the cast iron roasting pan with oil and

place the food in the pan.









































































































Gaggenau VR414111 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau VR414111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info