Bedienungsanleitung Gaggia Carezza - RI8525 SIN 042 GM (Seite 20 von 72) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

718563

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

4.6 Circuit Priming

When the water tank is empty, the machine circuit must be

primed again.

Note: if the machine has been operating without

water for a lot of time and the " " (14),

" " (20) and " " (18) lights are blinking, please refer

to the "Troubleshooting" table.

•

Place a container under the steam wand (Pannarello).

• Open the "hot water/steam" knob (3) by turning it clock-

wise. The pump is activated automatically.

• Wait until a steady jet of water ows out of the steam

wand (Pannarello).

•

Close the "hot water/steam" knob (3) by turning it

counter-clockwise. Remove the container.

Note: if the steam knob is opened by mistake

during the warm-up phase, the " " light

(20) starts blinking. Close the knob and wait until the

machine is ready.

4.7 Using the Machine for the First Time or

After a Period of Inactivity

This simple operation ensures an optimum brewing and must

be performed:

- at rst start-up;

- when the machine remains inactive for a long time (more

than 2 weeks).

Dispensed water must be emptied into an

adequate drain. It is not suitable for food use. If

the container lls up during the cycle, stop dispensing

water and empty the container before resuming the

operation.

Rinse the water tank and rell it with fresh drinking

water. Insert the water tank back into its seat in the coee

machine and make sure that it locks into place - its prole

should adhere to that of the coee machine.

B Turn on the machine by pressing the (11) button. Wait until

the " " light (14) turns on steady.

Place a container under the steam wand (Pannarello).

Open the knob (3) by turning it clockwise. The pump is ac-

tivated automatically.

D Dispense the whole water tank content from the steam/

hot water wand (Pannarello); to stop the dispensing pro-

cess, close the knob (3) by turning it counter-clockwise.

During this operation the pump is automatically

disengaged and the " " light (20) is blinking:

this is a normal behaviour of the machine. Close the

knob. Wait until the " " light (14) is steady on before

opening the knob again.

Fill the water tank with fresh drinking water. Insert

the water tank back into its seat in the coee machine and

make sure that it locks into place - its prole should adhere

to that of the coee machine.

Insert the lter holder (21) into the brew unit (4)

from the bottom. Turn the pressurized lter holder from

left to right until it locks into place. Release the pressurized

lter holder grip. The handle will turn slightly to the left.

This movement guarantees optimum lter holder perfor-

mance.

Place a suitable container under the lter holder.

Press the " " button and dispense a cup of hot wa-

ter.

At the end of the process, stop the operation by pressing

the " " button.

I Repeat the operations described in step (H) until the wa-

ter tank is completely empty.

Rell the water tank with fresh drinking water.

Remove the lter holder from the unit by turning it

from right to left and rinse it with fresh drinking water.

Now the machine is ready. Please see related chapters for

operating details on how to brew coee and dispense steam.

5 Rinsing

Note: make sure the lter holder is inserted to

ensure a proper warm-up of the machine.

The machine is set so as to automatically rinse the coee circuit

with fresh water every time it is turned on. This is conceived to

ensure the correct machine warm-up and an optimum coee

aroma.

Place a container under the dispensing spout.

On newly purchased machines this function is active (the " "

light (16) is on) and is performed at the end of the warm-up

phase, when the " " light (14) turns on steady.

Note: should no water pour from the lter

holder, perform a manual rinse as described in

sect. 7.1.

4219-450-03711 MANUAL GAG. CAREZZAIT-EN-DE-FR-ES-PT.indd 20 03/12/2018 11:32:10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggia Carezza - RI8525 SIN 042 GM Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info