Bedienungsanleitung Gaggia Libretto Titanium (Seite 28 von 42) (Englisch, Holländisch, Italienisch)

3594

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

• 28 •

DESCRIPTION OF PARTS

See Fig.01

1 Coffee bean container

2 Coffee bean container cover

(aroma preserver)

3 Grinding control knob

4 Dose control knob

5 Ground coffee doser cover

6 Cup Heater

7 ON-OFF switch

8 Water tank cover

9 Water tank

10 Coffee grounds drawer

11 Power cord

12 Drip tray + plate

13 Height adjustable coffee dispenser

14 Steam / hot water nozzle and pipe

15 Front cover

16 Steam knob

17 Coffee dispenser

18 Control panel

19 Key of coffee dispenser

20 Cleaning brush

21 Ground coffee measuring scoop

Control panel

22 Espresso coffee selector button / Page up in programming mode

23 Normal coffee selector button / Page down in programming

mode

24 “Caffe lungo” selector button / ESC in the programming mode

25 Ground coffee selector button

26 Hot water selector button

27 Descaling selector button

28 Programming button / “OK” in the programming mode

29 LCD display

30 Full tray warning light

4 INSTALLING THE COFFEE MAKER

For your own safety and the safety of others, follow the “Safety

Rules” (see chapter 3).

4.1 Packaging

The original packaging was designed and made to protect the appliance

during shipment.

We recommend you keep it for future needs.

4.2 Preliminaries

• Remove the coffee maker from the packaging and position it in a

suitable location that meets the requirements specified and described

in the safety rules (chap.3).

• Open the machine door, take the drip tray (12) from the package,

and fit the dregs box (10); then, fit the drip tray in the machine

(Fig.21).

• Make sure that the drip tray and plate (Fig.01, pos. 12), the coffee

grounds drawer (10) and the coffee dispenser (17) are fitted correctly

and that the front cover (15) is closed.

• Keep the cleaning brush (20) and the coffee dispenser key (19)

supplied with the appliance within easy reach.

If the display signals a fault when you switch on the

machine, it means that one of the above-described

components has not been properly positioned (Par.16).

4.3 Preparing the coffee maker for use

• Open the water tank cover (Fig.02) and remove the tank (Fig.03).

Rinse and fill with fresh potable water (Fig.04); we recommend

that you do not exceed the “MAX” level mark. Replace the water

tank in its housing and reposition the cover on top.

Always fill the tank (9) with fresh still water. Hot water

and other liquids can damage the tank and/or the

appliance. Do not operate the appliance without water: make

sure that there is enough water inside the tank.

• Lift the cover (Fig.05) and fill the container with coffee beans

(Fig.06).

Use coffee beans only. Ground and instant coffee, as

well as other items, will cause damage to the appliance.

• Set the cover back in place on the coffee container (1).

• Insert the plug into the outlet on the back of the coffee machine (Fig.07)

after making sure that the on/off switch (7) is set on “O”.

Insert the plug on the other end of the cord into a suitable wall outlet.

• The machine on/off switch is set on “O” (OFF); to turn the machine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggia Libretto Titanium Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info