Bedienungsanleitung Gaggia RI9301 Gaggia Baby (Seite 13 von 78) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

544803

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

ENGLISH

• 11 •

Description of parts:

FIG. 01

1 Main switch

2 Hot water/brew switch (pump)

3 On/off light

4 Steam switch (temperature)

5 Correct temperature light

6 Removable water tank

7 Steam/hot water knob

8 Turbo frother steam nozzle (removeable)

9 Filterholder

10 "Perfect crema" pod ﬁ lter

11 "Perfect crema" ﬁ lter for ground coffee

12 Basin (removable)

13 Frothing jet device

14 Brewing head

15 Filterholder gasket

16 Shower disc holder

17 Shower disc

18 Tamper

19 Power cable and plug

20 Measuring spoon

21 Delivery spout

22 Tank cover

23 Grid (removable)

24 Cappuccino maker kit (OPTION)

25 Overﬂ owing protection hole

26 Level indicator for the basin

Instructions for the power supply cord

A A short power-supply cord is provided to reduce risks of

getting tangled up or tripping over a longer cord.

B Longer extension cords are available and may be used if

care is exercised in their use.

C If a long extension cord is used:

1 the marked electrical rating of the extension cord

should be at least as great as the electrical rating

of the appliance.

2 if the appliance is of the grounded type, the

extension cord should be a grounding-type 3-wire

cord, and the longer cord should be arranged so

that it will not drape over the counter top portable

top where it can be pulled on by children or tripped

over;

3 If the power supply cord has a polarized plug (one

blade is wider than the other), as a safety feature,

this plug will ﬁ t in a polarized outlet only one way.

If the plug does not ﬁ t fully in the outlet, reverse

the plug. If it still does not ﬁ t, contact a qualiﬁ ed

electrician. Do not attempt to defeat the safety

feature.

4 If damaged, the power cord must be replaced by

the manufacturer or an authorised service centre.

Preparation:

1. Remove the water tank cover (22) and ﬁ ll with cold water

to the MAX line indicated on tank (6). See FIG. 2.

N.B.: Near the word MAX on the tank there is the overﬂ owing

safety hole (25) in case of tank overﬁ lling.

The water tank can also be removed, after removing the

tank cover (22) using the handle.

Re-install tank with water and cover (22).

2. Insert plug (19) into a suitable wall outlet (see point 1

under “Caution”).

3. Turn the power switch (1) to “On”. The on/off light (3)

will switch on.

Make certain that the hot water/coffee switch (2) and

that the steam switch (4) are in the “Off” position.

Circuit Priming

N.B.: Upon ﬁ rst use, after dispensing steam or when the

water tank is empty, the machine’s water circuit must

always be primed.

This machine, featuring a pump to brew coffee, is equipped

with a self-priming system. Place an empty cup under the

brewing head (14), do not insert ﬁ lter holder and press hot

water/coffee switch (2) (pos. “On”).

You will hear the sound of the operating pump and after

few seconds, water will start to escape from the brewing

head (14).

Once cup is ﬁ lled, set coffee switch (2) onto pos “Off”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggia RI9301 Gaggia Baby Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info