15
GB
15 mm (5/8”): GARDENA Tap Connector, Art. No. (2)902,
and GARDENA Standard Hose Connector,
Art. No. (2)916
19 mm (3/4”): GARDENA Pump Connection Set, Art. No. 1752
or GARDENA Tap Connector, Art. No. 2802,
and GARDENA Standard Hose Connector,
Art. No. 2817.
Best results in delivery capacity are achieved when using 38 mm
(1 1/2”) hoses.
Best results in delivery capacity are achieved when using 50 mm
(2”) hoses.
The universal fitting 7allows you to connect all the hoses listed
in the previous table.
1. Cut off nipples of the universal fitting 7, which are not needed,
to match the hose connection.
2. Screw the universal fitting 7onto the pump.
3. Connect the hose to the universal fitting 7.
We recommend that you secure 50 mm (2”) and 38 mm (1 1/2”)
hoses additionally with a GARDENA Hose Clip Art. No. 7195
(for 50 mm) and Art. No. 7194 (for 38 mm).
Only for 10000 SL Inox:
For flat suction we recommend using a 13 mm (1/2”) or 15 mm
(5/8”) hose.
Only for 13 mm (1/2”) hose:
The universal fitting 7can also be equipped with a GARDENA
Regulator Valve Art. No. 977 so that the contents of the out-
let line do not flow back through the pump after pumping. The
Regulator Valve can be ordered from your GARDENA dealer.
4. Operation
The float switch 5turns the pump on automatically when the
water level exceeds the cut-in height and the water is pumped out.
The float switch 5turns the pump off again as soon as the water
level falls below the cut-out height.
1. Stand the pump on a firm surface
– or –
use a rope attached through the bore hole in the carrying
handle 2to immerse the pump in a well or shaft.
During automatic operation, ensure that the float switch
5
can move freely.
2. Plug the power cable 1into a mains socket.
For 18000 SP Inox:
Connecting the hose:
7
1
2
5
3
Automatic operation:
