4
GB
You can change the display level at any time, even during pro-
gramming. All program data that has been changed up till now
and confirmed by pressing OK will be saved.
Display Desscription
5Ticker Explanation of the program step /
Computer status.
6Weekdays Current weekday or programmed
(Mo), (Tu), ... watering days.
7Time Flashes when entering the current data
(Time - hours, minutes, day of the week).
8am / pm Display for 12 hour clock (e. g. in USA,
Canada).
9Prog Program-controlled watering
(Prog 1– 6)/
%(percentage change in run time)
(Prog 10)/
Watering with automatic water distributor
(Prog 11)/
Soil moisture sensor-controlled watering
(Prog 12 –14)/
Watering program on (ON ) / off (OFF ).
0Start Watering start time (flashes when in input
mode).
ARun Time Watering duration (flashes when in input
mode).
B24h, 2nd, 3rd, Watering cycle (with drop symbol
4th, 5th, 6th, 7th activated). Every 24 hours;
every 2/3/4/5/6/7 days.
C% (Run Time) Budget function: Watering duration for all
watering programs can be set centrally in
10% steps from 100% down to 10%.
DSensor Sensor: Sensor is connected.
ON / OFF ON : Sensor dry −>irrigation
OFF: Sensor moist −>no irrigation
ON+OFF off: Sensor deactivated
EBattery Indicates 5 battery levels:
3 bars: Battery fully charged
2 bars: Battery half full
1 bar: Battery low
1 bar flashing: Battery almost flat
0 bar: Battery flat
If no bars are displayed, the valve is no longer opened. A valve
opened by the program will also close again if the battery is
flat. The battery display is reset when the battery is replaced for
<10 seconds.
When the battery display shows 2 bars, the display turns off during
the night (22:00
-
06:00); if it shows only 1 bar, the display turns off
after one minute. During watering, or when any button is pressed,
the display goes into sleep mode.
E
9
8
6
0D
A
7
C
5
B
Display panel:
Sleep Mode:
