7
GB
5. Programming
The Water Computer has 3 watering modes:
•Begin Program-controlled watering (Prog 1
-
6) using the
programs entered (Watering begins depending on the watering
start times)
– or –
•Watering with water distributor (Prog 11 / 15) using
the GARDENA water distributor (watering of up to
6 watering lines)
– or –
•Soil moisture sensor-controlled watering (Prog 12
-
14 )
using a GARDENA Soil Moisture Sensor (watering begins
when the soil moisture sensor registers dry).
5.1 Basic programming
The controller can be removed to program the unit and pro-
gramming can be done on the move (see 4. Putting Your Water
Computer into Operation
“Inserting battery”
).
1. Insert rechargeable battery (see 4. Putting Your Water
Computer into Operation).
The language
English
flashes.
2. Set the language by turning the rotary button (E.g. English )
and confirm by pressing OK.
The ticker
Enter current time
appears.
1. Press Menu
(not necessary if the language has been set).
The ticker
Enter current time
appears.
Time
and the hour display will flash on the screen.
2. Set the time in hours with the rotary button
(example: 9hours) and confirm with the OK-key.
Time
and the minutes display flash.
3. Set the time in minutes with the rotary button
(example: 30 minutes) and confirm with the OK-key.
The ticker
Select current day
appears.
Time
and the day of the week display flash.
4. Set the day of the week by turning the rotary button
(E.g. Sa Saturday) and confirm with OK.
The ticker
Select program no.
appears.
Prog
and the program number flash on the screen.
Watering modes:
Setting language:
Set current time
and day of week:
1.
2.
3.
4.
