Bedienungsanleitung Gardena smart SILENO plus R160LiC 2018 (Seite 26 von 56) (Englisch)

687475

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Low

and

Medium

security prohibits access to the robotic

lawnmower if the PIN code is unknown.

High

security

also includes a warning that beeps if the correct PIN

code is not entered after a designated time period.

If the wrong PIN code is entered 5 times in succession

the robotic lawnmower is blocked for a time. The

blockage time is extended for every new incorrect

attempt.

Function Low Medium High

Time lock X X X

PIN request X X

Alarm X

3.15.1.1 Time lock

This function means that the robotic lawnmower cannot

be started after 30 days without first entering the correct

PIN code. When the 30 days has passed the robotic

lawnmower will continue to mow as normal, but the

Enter PIN code

message appears when the hatch is

opened. Enter your code again and press OK.

3.15.1.2 PIN request

This function means that the robotic lawnmower

requests a PIN code when the main switch is set to

and each time the hatch is opened. The correct PIN

code must be entered to use the robotic lawnmower.

If the wrong PIN code is entered 5 times in succession

the robotic lawnmower is blocked for a time. The

blockage time is extended for every new incorrect

attempt.

3.15.1.3 Alarm

This function means that an alarm sounds if the PIN

code is not entered within 10 seconds after the STOP

button has been pressed or the robotic lawnmower has

been lifted up for any reason. A ticking noise indicates

that the PIN code must be entered to prevent triggering

the alarm. The alarm can be turned off at any time by

entering the correct PIN code.

3.15.2 Advanced

Advanced

New loop signal

Change PIN code

3.15.2.1 New loop signal

The loop signal is randomly selected to create a unique

link between the robotic lawnmower and the charging

station. In rare cases, there may be a need to generate

a new signal, for instance if two adjacent installations

have a very similar signal.

1. Place the robotic lawnmower in the charging station.

2. Select

New loop signal

in the menu.

3. Press OK and await confirmation that the loop signal

has been generated. This normally takes about 10

seconds.

3.15.2.2 Change PIN code

Enter the new PIN code and press OK. Confirm by

entering the same code again and pressing OK. When

the PIN code is changed, the message

PIN code

changed

appears in the display.

Make a note of the new PIN code on the designated line

in Memo. See

Introduction on page 3

3.16 Installation

For many working areas there is no need to change the

factory settings but sometimes, depending on the lawn

complexity, the mowing result can be improved by

making manual settings.

INSTALLATION

Advanced

Lawn coverage

3.16.1 Lawn coverage

This menu function is used to steer the robotic

lawnmower to remote parts of a working area. In

complex gardens with for instance many areas which

are joined by narrow passages, the mowing result can

be much improved by changing settings.

Up to 3 remote areas can be set. Select an area using

the left and right arrow keys followed by OK.

Lawn coverage

Area 1

Area 2

Area 3

Area3

Area2

Area1

A number of unique selections are required to allow the

robotic lawnmower to reach the remote area.

26 - Installation 307 - 002 - 11.10.2017

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardena smart SILENO plus R160LiC 2018 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gardena smart SILENO plus R160LiC 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info