Bedienungsanleitung Gardenline BC35TS-2 (Seite 6 von 26) (Englisch)

724647

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

• Follow all sections of the Additional Safety Rules for Petrol Products.

• Always wear goggles, earmus and a dust mask when using the Line

Trimmer.

• Only use the length and diameter of nylon cutting line as detailed in

this manual. Never use any other cutting material.

• Never use the Line Trimmer without the supplied and correctly

tted guard.

• Ensure the line trimming blade is in good order to ensure the correct

length of cutting line is maintained.

• Keep bystanders at least 5 metres away from the operating the Line

Trimmer.

• During operation, always hold the Line Trimmer with both hands,

and make use of the Double Shoulder Strap Harness.

• Maintain a rm footing. Wear suitable fully enclosed footwear.

• Always turn o the petrol motor when making adjustments to the

cutting head or line, when cleaning, or performing any maintenance

tasks.

• When operating the Line Trimmer, be aware of the ground where the

Line Trimmer is being operated. The cutting head and line is designed

to trim grass and similar undergrowth, and stones and foreign matter

should be avoided.

• Prior to operation, ensure the assembled line Line Trimmer is checked

for loose components and the operating controls of the trimmer.

Do not use the Line Trimmer if the controls are not in perfect working

order. Ensure all nuts, bolts and clamps are all tight.

WARNING: Extreme care must be taken when using blades to ensure

safe operation. Read the safety information for safe operation using

the blade.

• Follow all sections of the Additional Safety Rules for Petrol Products.

• Always hold Brushcutter with both hands when operating. Use a rm

grip on both handles.

Additional Safety Rules for Petrol Line Trimmers.

Additional Safety Rules for Petrol Brushcutters

• Maintain your grip and balance on both feet. Position yourself so that

you will not be drawn o balance by the kick-back reaction of the

cutting blade.

• Inspect and clear the area of any hidden objects such as glass, stones,

concrete, fencing, wire, wood, metal, etc.

• Never use blades near footpaths, fencing, posts, buildings or other

immovable objects.

• Never use a blade after hitting a hard object without rst inspecting

it for damage. Do not use if any damage is detected.

• The unit is used as a scythe, cutting from the right to the left in a

broad sweeping action from side to side.

• Always wear goggles, earmus and a dust mask when using the

Brushcutter.

• Only use blades with a cutting diameter of 255mm and a bore size

of 25.4 mm.

• Only use the Brushcutter with the correctly supplied and tted

Brushcutter guard.

• Keep bystanders a minimum of 15 metres from the operation of the

Brushcutter.

• Prior to operation, ensure the assembled Brushcutter is checked for

loose components and the operating controls of the Brushcutter.

Do not use the Brushcutter if the controls are not in perfect working

order. Ensure all nuts, bolts and clamps are all tight.

• Check the blade is correctly seated and the blade nut is tight.

• DO NOT substitute the blade with any other types of blade other than

that is detailed in this manual. DO NOT t a saw blade to this product.

• This brushcutter is tted with a centrifugal clutch. At idle, the blade

must not be rotating. Make a practice to always check the clutch is

correctly operating and at idle the blade does not rotate, and rotation

of the blade only occurs as the speed of the motor is increase from

manually operating the speed trigger.

Do NOT use the brushcutter if the blade at idle speed is rotating and

take it to an authorised service centre.

• Exercise extreme caution when using the 3T brushcutter blade with

this unit. Blade thrust is the reaction which may occur when the

spinning 3T brushcutter blade contacts anything it cannot cut.

This contact may cause the 3T brushcutter blade to stop for an instant,

and suddenly “thrust” the unit away from the object that was hit.

This reaction can be violent enough to cause the operator to lose

control of the unit. Blade thrust may occur without warning if the

blade snags, stalls or binds. This is more then likely to occur in areas

where it is dicult to see the material being cut.

8 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardenline BC35TS-2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info