782039
22
Zoom out
Zoom in
Vorherige Seite
1/53
Nächste Seite
Kickback is the consequence of incorrect or erratic use of the machine. It can be
prevented by appropriate safety measures such as described below:
Hold the saw with both hands, ensuring thumbs and ngers clasp the
handles of the chainsaw. Position your body and arms in such a way that
you can withstand kickback forces. If appropriate measures are taken, the
operator can control kickback forces. Never let go of the chainsaw.
Avoid an abnormal body posture and do not saw above shoulder height.
This prevents accidental contact with the tip of the guide bar and it enables
better control of the chainsaw in unexpected situations.
Always use replacement guide bars and saw-chains specied by the
manufacturer. Incorrect replacement guide bars and saw-chains can cause
breaking of the chain and/or kickback.
Follow the manufacturer‘s instructions concerning sharpening and
maintenance of the saw-chain. Over-reduction of depth limiters increases
kickback tendency.
m WARNING
Beware of the following:
Rotary recoil (Fig. 28)
A = Recoil distance / B = Recoil reaction zone
Impact/Jamming recoil and pulling reactions (Fig. 29)
A = Pull / B = Solid objects / C = Push
To prevent pulling reactions, place the wood you wish to cut against the claw
stop. Use the claw stop as a pivot point during cutting.
5.6 Safety notices for maintenance / storage
Have your machine repaired by qualied specialists and only with original spare
parts. This ensures the safety of the machine.
1. Before use, always visually check the tool for wear and tear or damage. Replace
worn or damaged components and bolts. Tighten all nuts, bolts and machine
screws to ensure that the equipment is in a safe operating condition.
2. Regularly check the fuel system for leakage or signs of abrasion, for example
from porous fuel lines, loose or missing clamps and damage to the tank or the
tank lid. All faults must be resolved before use.
26 AFTER SALES SUPPORT
aldi.service.uk@scheppach.com 00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Safety regulations Petrol chainsaw 41cc
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gardenline CSP41 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info