Bedienungsanleitung Gardenline DM53E3-D196 (Seite 12 von 24) (Englisch)

724643

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

196cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

(toll free)

AFTER SALES SUPPORT

(toll free)

196cc 4 Stroke Petrol Lawn Mower

e-mail: help@powertoolsupport.com1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

20 21

Assembly Assembly

1. Once the handles are set up as shown in Fig A,

remove the 2 x lower handle locking knobs

( + bolts, curved washers & circle washers) (11)

from your accessory bag (Fig B). Place the lower

handle in position to assemble by aligning the

2 x lower handle ends on the outer side of the

lower handle mounting plates (12).

2. Once in position, insert the bolt on each side

through the lower mounting plate (12) from the

inside of the mounting plate (12) through to the

outside of the lower handle (9) (Fig C).

NOTE: You may need to support the lower

handle to engage the bolt through as shown

in Fig C on the left.

3. Once the bolts are loosely in position, t the

plastic curved washer over the end of the bolt,

then the circle washer (Fig D), then screw the

lower handle locking knob over the plastic circle

washer and secure by turning clockwise until

tight and secure (Fig E).

4. Next select the desired position to set the height

of the full handle assembly. There are 3 positions

as shown in Fig F.

It is suggested to select the middle location

to start with. You can then raise or lower the

adjustment after you have seen the overall

height when the assembly is complete.

5. Rotate both of the forward rotating quick adjustment knobs (14) 90°

(Fig G). THESE ARE FIRM TO ROTATE, however, when you rotate these

knobs the location pin is drawn back into the handle. Align the pin with

the selected position (Fig F) and then rotate the forward rotating quick

adjustment knobs (14) 90°. The pin will locate in the selected hole. Repeat

for the opposite side.

Attaching the Upper Handle Bar

to the Lower Handle

With the lower handle (9) in position, the upper

handle bar (1) can now be secured in position.

IMPORTANT: Again ensure the cables are not

tangled or crossing over before applying the

upper handle bar (1).

1. Remove the 2 x upper handle locking levers

( + curved washer/s , circle washers & locking

knobs) (10) from your accessory bag (Fig H).

2. Align the ends of the upper handle bar (1) on

the external side of the lower handle (9) such

that the holes in the ends of the upper handle

bar (1) align with the holes in the top of the

lower handle (9).

3. Insert the upper handle locking lever (10) bolt

through the upper handle (1), then through the

lower handle (9). When in position repeat on

the opposite side to keep the upper handle bar

(1) sturdy in position (Fig I).

4. Apply the curved washer, circle washer and

locking knob on the internal side of the lower

handles (9), push the locking lever down

towards the handle bar, then tighten the

locking knob until secure (Fig J).

NOTE: Tension on the upper handle locking

lever/s (10) can be adjusted by rotating the

lever knob.

5. Apply the cable clip holder (13) (from your

accessory bag) on the lower handle to ensure

the self propel engagement cable (5) is secure

in position above the handle bar and not

tangled (Fig K).

(X2)

G.F.

90°

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardenline DM53E3-D196 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info