04
Assembly & Parts List 2
Important! When using equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read the complete
operating manual with due care. Keep this manual in a safe place
so that the information is available at all times. If you give the
equipment to any other person, give them these operating
instructions as well.
We accept no liability for damage or accidents which arise due
to non-observance of these instructions and the safety information.
Layout and items supplied (see Fig.1-2)
1 Handle
2 Accessory mount
3 Swing-out push bar
4 Carry handle
5 High-pressure cleaner
6 Power cable
7 Foam nozzle
8 Mains plug
9 Connector for high-pressure hose to device
10 Holder for gun/accessories
11 Transportation wheels
12 ON/OFF switch
13 Water inlet connector
14 Gun
15 Cleaning agent tank
16 Lance point/wide cone
17 Lance with rotating nozzle
18 High-pressure hose
19 Water intake filter (Fig. 11)
A Wire
05
Assembling the equipment
Assemble the high-pressure cleaner as shown in Fig. 2-7.
Water inlet connector (Fig. 1/13)
The connection for the water inlet (13) is equipped with a connector
for standard hose coupling systems. Remove the transport cap (fig.5)
and attach the hose coupling on the supply hose (min. diameter 1/2“)
to the connector for the water inlet (13).
Connecting the high-pressure hose (Fig. 1-2; 5-6/18)
Remove the transport cap as shown in Fig. 5 from the connection for
the high-pressure hose (9). Connect the high-pressure hose (18) to
the connection on the high-pressure cleaner (9) (Fig. 6) and on the
spray gun (14) (Fig. 2).
Fitting the gun attachments
The normal lance, the lance with rotating nozzle or the foam nozzle
can be attached prior to using the high-pressure cleaner (Fig. 2).
Lance point/wide cone (16)
The shape of the water jet can be changed from concentrated to
flat jet by turning the nozzle (Fig. 9).
Lance with rotating nozzle (17)
To remove particularly stubborn dirt, use the lance with rotating
nozzle (17).
Electrical connections (Fig. 1)
• Beforeyouconnecttheappliancetothemainssupplymakesure
that the data on the rating plate is identical to the mains data.
• Ifyouuseanyextensioncables,makesurethattheyaresuitable
for outdoor use and have large enough wires:
1 – 10m: 1.5 mm
2
10 – 30m: 2.5 mm
2
• Plugthemainsplug(8)onthepowercable(6)intothemains
socket outlet.
Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946244
Web Support www.einhell-uk.co.uk
Model Number: 7944
Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946244
Web Support www.einhell-uk.co.uk
Model Number: 7944