Pack contents / parts
Congratulations on the purchase of your Gardenline® Submersible Water
Pump. When you open your packaging, first remove all items and check
there are no parts damaged or missing. If you find anything wrong,
do not operate the product until the parts have been replaced or the
fault has been rectified. Failure to do so could result in serious
personal injury.
Contents of carton
1 x Submersible Pump
1 x L-shape Elbow Connector
1 x Adaptor
1 x Instruction Manual
1 x Warranty Card & details
WARNING! When using mains-powered tools, basic safety
precautions, including the following, should always be followed
to reduce risk of re, electric shock, personal injury and
material damage.
Read and understand the manual prior to operating this Pump.
Save these instructions and other documents supplied with this
Pump for future reference. The electric motor has been designed for
230V and 240V only. Always check that the power supply
corresponds to the voltage on the rating plate.
Note: This Pump is earthed in accordance with AS/NZS 60335-2-41.
Note: The power outlet used for the water Pump must be protected
by a 30mA residual current device or earth leakage circuit breaker.
If the power outlet is external, ensure that it is weather proof. If the
supply cord is damaged, it must be replaced by an electrician or a
power tool repairer to avoid a hazard. The water Pump has a built-in
thermal protection overload switch. The water Pump stops if an over-
load occurs. The motor restarts automatically after it has cooled down.
Using an Extension Lead
Always use an approved extension lead suitable for the power input
of this product. Before use, inspect the extension lead for signs of
damage, wear and ageing. Replace the extension lead if damaged or
defective. When using an extension lead on a reel, always unwind the
lead completely. Use of an extension lead not suitable for the power
input of this product or which is damaged or defective may result in a
risk of fire and electric shock.
Note: It is recommended where possible to avoid using extension
cords as this can result in a voltage drop which could result in
overheating of the motor or a loss of power.
Electrical safety
3
