724641
9
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
45cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 53942 • 09/2018 • PM2006H
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
45cc Petrol Chainsaw
MODEL: №. 53942 • 09/2018 • PM2006H
14 15
This chainsaw comes fully assembled in the box
and does not require any pre-assembly.
Replacing/Re-Installing the Guide
Bar & Chain
WARNING: The chain has sharp edges.
Use work gloves for safety.
WARNING: Ensure the engine is switched
o when making any adjustments to the chain and bar.
IMPORTANT: The front guard / chain brake (13) must be disengaged
when replacing / reinstalling the guide bar (19) and/or chain (20).
1. Place the chainsaw on a at and secure surface and check that the chain
brake (13) is disengaged/o (Fig A).
2. To remove the chain drive side cover (23) push out the black locking lever
(24) located in the middle of the tool free assembly (35) (Fig B). Whilst
pressing the black chain tensioning lock (5) rotate the chain drive side
cover red locking dial (24) using the lever in an anti-clockwise direction,
(as shown marked on the dial) 1-2 turns until the chain drive side
cover(23) is loose enough to remove (Fig C).
NOTE: If the chain (20) is still tight you may turn anti-clockwise a further
couple of turns.
3. Remove the existing guide bar (19) and chain (20) from the chainsaw.
4. Place the chain (20) around the drive sprocket (29) loosely with the chain
links in the direction shown on the guide bar (19) (Fig D).
5. Insert the new guide bar (19) into position over the 2 studs (one threaded
and one plain), and on a slight angle upwards, and push the guide bar
(19) towards the drive sprocket (29) to easily place the chain (20) around
the guide bar (19) (Fig E).
6. To t the chain (20), start by placing the chain (20) around the nose
sprocket of the guide bar (19) ensuring the chain (20) is fully located on
the drive sprocket (29) wheel (Fig F), and also fully in the channel around
the nose of the bar (Fig G).
7. With one hand, extend OUTWARD the guide bar (19) to remove all slack
of the chain (20) and thus ensuring the chain (20) does not jump out of
the narrow drive sprocket (29) on the chainsaw. With outward tension
on the bar, t the chain
(20) into the channel
of the bar completely.
Only remove the
outward tension on
the bar when the chain
(20) is completely tted
around the guide bar
(19) (Fig H).
B. D.C.
Assembly Assembly
A.
BRAKE
ON
BRAKE
OFF
TIGHTEN
LOOSEN
G.
H.
E.
F .
Assembly
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gardenline PM2006H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info