724674
34
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
31CC 4 STROKE
BRUSHCUTTER,
LINE TRIMMER
User Manual
Product
Info
www.powertoolsupport.com
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
find out more about the Aldi product you have
purchased*.
* Depending on your tarif you may be charged for the connection.
Product
Info
For Know How Videos, click on the
“Product Assistance” tab, then the
“How To Product Videos” link.
Contents
Pack contents /parts 2
Description of Symbols 3
General safety instructions 4
Additional Safety rules for Petrol products 7
Additional Safety Rules for Petrol Line Trimmers 8
Additional Safety Rules for Petrol Brushcutters 8
Parts List 10
Adding and Checking oil 12
General Assembly for use as a Line Trimmer or Brushcutter 14
Connecting the J handle to the Upper shaft 15
Fitting the Brushcutter / Line Trimmer Guard 18
Fitting & Adjusting the Double Strap Shoulder Harness 19
Fitting the Brushcutter Blade 20
Changing/Removing the Brushcutter Blade 21
Tips for Operation 22
Specic Assembly for use as a Line Trimmer 22
Fitting/Removing the Spool and Line assembly 23
Changing the line only on the Spool and Line assembly 25
Use of the Line trimmer 27
Advancing the line manually 27
Tips for operating the Line Trimmer / Tips for cutting 28
Feeding the line 29
Fuelling 30
Starting the Brushcutter / Line Trimmer 31
Stopping the Brushcutter/Line Trimmer/Maintenance and Cleaning 33
Air lter Fuel Filter / 34
Checking the spark plug, Servicing 35
Storage & Maintenance 36
Warranty / Environmental protection /
What your 3 year warranty means 36
Service Support / Accessories 37
Troubleshooting 38
Specications 39
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
4
Pack contents / parts
Congratulations on the purchase of your Gardenlin31cc 4 Stroke
Brushcutter / Line Trimmer. When you open your packaging, first remove
all items and check there are no parts damaged or missing. If you find
anything wrong, do not operate the product until the parts have been
replaced or the fault has been rectified. Failure to do so could result in
serious personal injury.
IMPORTANT INFORMATION.
NOTE: This is a 4 stroke Brushcutter / Line Trimmer.
The motor MUST be filled with 60ml of SAE 10W/30
BEFORE starting. Fresh unleaded fuel must be used in this unit.
Do NOT use Ethanol based fuels. Do NOT mix oil with fuel.
Contents of carton
1 x Brushcutter Guard (Guard, clamp, 2 x screws + 4 x washers)
1 x 3T Brushcutter Blade
2 x Spool & Line Assembly (not fitted)
1 x Clip On Line Trimmer Guard Attachment
1 x J Handle
1 x Double Shoulder Strap Harness
1 x Spark Plug Tube Spanner
1 x Open Ended Spanner (10mm-8mm)
2 x Allen Key (5mm & 4mm)
1 x Blade Nut Spanner / Wrench
1 x Instruction Manual
1 x Warranty Card & details
2
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
3
Description of symbols
The instruction manual or rating plate on your product may show symbols.
These represent important information about the product or instructions
on its use.
Conforms to relevant standards for electromagnetic compatibility.
Wear hearing protection, eye protection and breathing protection.
Wear safety footwear.
Wear safety gloves.
Warning.
Read these instructions for use carefully.
Choke control
Start position (choke closed).
Run position (choke open).
Use at a distance of at least 15m from other people.
Thrown objects and rotating line can cause severe injury.
Do not operate the unit without the safety guard in place.
Keep away from rotating cutter.
Sharp blade on the safety guard, do not touch the cut off knife.
Explosive material.
Extremely hot surface. Do not touch a hot muffler, gear box or
cylinder, you may get burned. These parts get extremely hot from
operation and remain hot for a short time after the unit is turned off.
Do not put in water
Noise label rating 84dBA (taken at 7.5 metres)
you must wear ear protection at all times.
General safety warnings
Intended use of the 31cc 4 Stroke Brushcutter / Line Trimmer
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial or trade use.
This Line Trimmer has been designed for trimming lawn edges and
grass around shrubs and trees.
The Brushcutter has been designed for cutting and clearing grass,
thick weeds, vegetation and shrubs.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result
in electric shock, re and/or serious injury.
The word power tool used in the following warnings and
throughout this manual refers to BOTH electrical power tools
and ALSO petrol driven power tools.
This unit may not be used by people (including children) with reduced
physical, sensory or mental capacities, with a lack of experience and without
the appropriate knowledge, unless they are supervised by someone who is
responsible for their safety or have been instructed by such a person with
regard to how the unit is to be operated. Children should be supervised to
ensure that they do not play with the device.
Save all warnings and instructions for future reference
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents. Rags, cloths, cord, string and similar items should never be left
around the work area.
b. Do not operate power tools in explosive environments, such as in the
presence of ammable liquids, gases, or dust. Power tools
create sparks, which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause the operator to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
4
b. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is increased risk of electric shock if your
body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately.
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor reduces the risk
of electric shock.
f. To reduce the risk of electric shock, the manufacturer recommends the
use of a residual current of 30mA or less at all times.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious
personal injury.
a. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection will reduce personal injures.
a. Prevent unintentional starting. Ensure the switch is in the off
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on
invites accidents.
a. Remove any adjusting key or wrench before turning the power tool on.
A wrench or key left attached to a rotating part of the power tool may result
in personal injury.
a. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
a. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
a. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
5
General safety warnings
4. Power tool use and care
a. Do not force the power tools. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
a. Do not use the power tool if the switch does not turn it on and
o. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
a. Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
a. Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
a. Maintain power tools with care. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained
power tools.
a. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
a. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous
situation.
6
Additional Safety Rules for Petrol Products
• Donotoperateinahazardouslocation.Suchareasincludewhere
there is a risk of explosion of petrol fumes, leaking gas or
explosive dust.
• Donotoperateinaconnedarea.Exhaustgases,smokeorfumes
could reach dangerous concentrations.
• Protectyourproduct.ThisBrushcutter/LineTrimmeris
NOT WEATHERPROOF and should not be exposed to direct sunlight,
high ambient temperature and damp, wet or high humidity
conditions.
• Donotsmokewhilerefuelling.Thisispotentiallydangerousasitmay
ignite the fuel and cause an explosion.
• Takecarenottospillfueloroil.WhenrefuellingtheBrushcutter/Line
Trimmer ensure that the motor has been switched off. Prevent the
spilling of fuel as this may also ignite with the hot motor.
Never refuel whilst the engine running.
• Checkforfuelleaks.Donotoperateifafuelleakisdetected.Wherea
fuel leak is detected, drain the tank of fuel and have the leak repaired.
• BecarefulwhereyoustoretheBrushcutter/LineTrimmer.Storethe
Brushcutter / Line Trimmer in a dry area away from flammable liquids.
• Keepyourdistance.TheBrushcutter/LineTrimmeremitsexhaust
fumes. Ensure bystanders keep a safe distance.
• Neverllfueltankindoors.Neverllfueltankwhenengineisrunning
or hot. Do not smoke when filling fuel tank.
•Weargoggles
•Wearearmus
•Wearabreathingmask
7
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Additional Safety Rules for Petrol Line Trimmers.
• FollowallsectionsoftheAdditionalSafetyRulesforPetrolProducts.
• Alwaysweargoggles,earmusandaduskmaskwhenusingtheLine
Trimmer.
• Onlyusethelengthanddiameterofnyloncuttinglineasdetailedin
this manual. Never use any other cutting material.
• NeverusetheLineTrimmerwithoutthesuppliedandcorrectly
fitted guard.
• Ensurethelinetrimmingbladeisingoodordertoensurethecorrect
length of cutting line is maintained.
• Keepbystandersatleast5metresawayfromtheoperatingtheLine
Trimmer.
• Duringoperation,alwaysholdtheLineTrimmerwithbothhands,
and make use of the Double Shoulder Strap Harness.
• Maintainarmfooting.Wearsuitablefullyenclosedfootwear.
• Alwaysturnothepetrolmotorwhenmakingadjustmentstothe
cutting head or line, when cleaning, or performing any maintenance
tasks.
• WhenoperatingtheLineTrimmer,beawareofthegroundwherethe
Line Trimmer is being operated. The cutting head and line is designed
to trim grass and similar undergrowth, and stones and foreign matter
should be avoided.
• Priortooperation,ensuretheassembledlineLineTrimmerischecked
for loose components and the operating controls of the trimmer.
Do not use the Line Trimmer if the controls are not in perfect working
order. Ensure all nuts, bolts and clamps are all tight.
Additional Safety rules for Petrol Brushcutters
WARNING: Extreme care must be taken when using blades to ensure
safe operation. Read the safety information for safe operation using
the blade.
• FollowallsectionsoftheAdditionalSafetyRulesforPetrolProducts.
• AlwaysholdBrushcutterwithbothhandswhenoperating.Usearm
grip on both handles.
• Maintainyourgripandbalanceonbothfeet.Positionyourselfsothat
you will not be drawn off balance by the kick-back reaction of the
cutting blade.
• Inspectandcleartheareaofanyhiddenobjectssuchasglass,stones,
concrete, fencing, wire, wood, metal, etc.
8
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
11
• Neverusebladesnearfootpaths,fencing,posts,buildingsorother
immovable objects.
• Neveruseabladeafterhittingahardobjectwithoutrstinspecting
it for damage. Do not use if any damage is detected.
• Theunitisusedasascythe,cuttingfromtherighttotheleftina
broad sweeping action from side to side.
• Alwaysweargoggles,earmusandaduskmaskwhenusingthe
Brushcutter.
• Onlyusebladeswithacuttingdiameterof255mmandaboresize
of 25.4 mm.
• OnlyusetheBrushcutterwiththecorrectlysuppliedandtted
Brushcutter guard.
• Keepbystandersaminimumof15metresfromtheoperationofthe
Brushcutter.
• Priortooperation,ensuretheassembledBrushcutterischeckedfor
loose components and the operating controls of the Brushcutter.
Do not use the Brushcutter if the controls are not in perfect working
order. Ensure all nuts, bolts and clamps are all tight.
• Checkthebladeiscorrectlyseatedandthebladenutistight.
• DONOTsubstitutethebladewithanyothertypesofbladeotherthan
that is detailed in this manual. DO NOT fit a saw blade to this product.
• Thisbrushcutteristtedwithacentrifugalclutch.Atidle,theblade
must not be rotating. Make a practice to always check the clutch is
correctly operating and at idle the blade does not rotate, and rotation
of the blade only occurs as the speed of the motor is increase from
manually operating the speed trigger.
Do NOT use the brushcutter if the blade at idle speed is rotating and
take it to an authorised service centre.
• Exerciseextremecautionwhenusingthe3Tbrushcutterbladewith
this unit. Blade thrust is the reaction which may occur when the
spinning 3T brushcutter blade contacts anything it cannot cut.
This contact may cause the 3T brushcutter blade to stop for an instant,
and suddenly “thrust the unit away from the object that was hit.
This reaction can be violent enough to cause the operator to lose
control of the unit. Blade thrust may occur without warning if the
blade snags, stalls or binds. This is more then likely to occur in areas
where it is difficult to see the material being cut.
9
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
10
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Parts List
1. Spark plug/spark plug cover
2. Recoil starter
3. Air filter cover
4. Motor housing
5. Fuel tank cap
6. Fuel tank
7. Main handle
8. Throttle trigger
9. Safety lever
10. On/Off switch
11. Upper shaft
12. J Handle
13. Shaft locating lever
14. Shaft locking knob
15. Lower shaft
16. Guard attachment clamp
(+2 x screws & washers)
17. Brushcutter guard
18. Lower shaft gearbox
19. Spindle lock entry hole
20. Spindle
21. Inner bush with spindle hole
22. Choke lever (Red lever)
23. Priming bulb
24. Oil reservoir/ dipstick
25. Screw holes for Brushcutter guard
26. Blade nut
27. Protector
28. 3T Brushcutter blade
29. Outer flange
30. Inner flange
31. Double shoulder strap harness
32. Cut off knife
33. Clip-on Line trimmer
guard attachment
34. Bump knob
35. Spool & Line Assembly
36. Assembly accessories
(1 x Spark plug tube spanner,
1 x Open ended spanner -
10mm-8mm,
2 x Allen key - 5mm & 4mm,
1 x Blade nut wrench)
37. Double shoulder strap
attachment point
38. Fuel tank bracket (not shown)
34
35
36
32
33
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
11
12
26
27
28
29
30
1
4
10
9
15
14
13
16
6
5
3
2
8
7
17
18
37
25
25
31
20
21
19
23
22
24
11
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
12
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Operation of the Brushcutter / Line Trimmer
Adding and Checking the oil
IMPORTANT: The motor of this brushcutter / line trimmer is packed with NO
OIL in the motor. Prior to starting the motor, oil MUST be added to the oil
reservoir (24). Failure to add sufficient oil will result in damage to the motor
which is NOT covered under the warranty of the unit.
NOTE: This is a 4 stroke brushcutter / line trimmer. The motor sump MUST
be filled with 60mL of SAE 10W/30 BEFORE starting. Fresh unleaded fuel
must be used in this unit. Do not use ethanol based fuels.
Do NOT mix oil with fuel. Oil must be separately poured into the sump of
the motor as follows, and also the oil level MUST be checked every time the
line trimmer / brushcutter is used.
NEVER attempt to remove the oil dipstick (24) while the motor is running.
ENSURE the motor is not running when the oil level is being checked.
On a new unit, the motor needs to be filled with 60mL of SAE 10W/30
engine oil.
To initially fill with oil or to check the oil level,
follow the process below.
1. Lay the unit down so that the fuel tank bracket
(38) is resting on a secure surface, or on the
ground. Clean the area directly around the
oil reservoir (24). (Fig. A)
2. Clean the area directly around the oil dipstick
(24), and then fully remove/unthread the oil
dipstick in an anti clockwise direction.
3. On a new unit which has not previously been
filled with oil, Measure 60mL of SAE 10W/30 oil
and pour into the oil reservoir (24) where the
dipstick was removed.
4. Clean the dipstick portion of any oil residue
and then insert the dipstick fully into the motor,
however, DO NOT THREAD the dipstick into the
reservoir. Hold the dipstick in place for a few
second and then remove. (Fig B)
A.
B.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
13
5. Check the oil mark on the dipstick. It should be
approaching the top mark on the dipstick
(Fig C). Be careful not to overfill. (Fig D)
6. If the oil level is not close to the top oil mark line,
then add small amounts of oil and
repeat steps 3,4 & 5 until the oil level is
approaching the top oil mark on the dipstick.
DO NOT OVERFILL. Do Not EXCEED the upper
mark on the dipstick.
7. IMPORTANT: The motor should NEVER be
started if the oil level is below the low oil mark.
Always check the oil level before starting
ensuring the brushcutter / line trimmer is
positioned as per step 1 for checking.
8. When the oil level is at the upper oil level mark,
replace the dipstick and thread in the dipstick in
a clockwise direction until the dipstick is firmly in
place. The Sealing O ring on the shoulder of the
dipstick should be fully compressed when
the dipstick is firmly hand tightened.
C.
UPPER LOWER
MARK MARK
D.
DO NOT
OVER FILL
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
14
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
User Instructions
General Assembly for use as a
Line Trimmer or Brushcutter
Connecting the Lower shaft
to the Upper shaft
1. Lay the unit down so that the fuel tank
bracket (38) is resting on a secure surface,
or on the ground.
2. Loosen the shaft locking knob (14). (Fig. E)
3. Whilst pushing down on the shaft locating lever
(13) as indicated by the word “PUSH”, insert the
lower shaft (15) into the upper shaft (11) joiner.
There is a small locating slot in the lower shaft.
When this slot enters the joiner, release the
locating lever (13). Continue to insert fully the
lower shaft. When fully inserted the tab on the
locating lever (13) should locate into the slot of
the lower shaft. If the shaft slot does not locate
into the locating lever tab, rotate the lower
shaft until the slot fully engages. You will hear a
click when it engages. (Fig. F)
NOTE: Ensure you check that the lower shaft
cannot be pulled outwards when the lever is
correctly engaged.
4. When the shaft is located, tighten the shaft
locking knob (14) to secure both shafts in place.
(Fig. G)
5. Using the 5mm supplied allen key (36), check
the screw on the underside / opposite side of
the locking lever is tight. (Fig. H)
E.
F.
G.
H.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
15
Connecting the J handle to the Upper shaft
WARNING. The J handle must be tted before use of this product.
This includes both combinations of the Brushcutter or the
Line Trimmer. Ensure the motor is NOT operating when tting
or adjusting the J handle.
1. Lay the unit down so that the fuel tank bracket (38)
is resting on a secure surface, or on the ground.
The J Handle clamp assembly has already been
located and fitted to the upper shaft (15).
Using the supplied 5mm allen key (36), and the
10mm open ended spanner (36), remove the
screws retaining the top clamp plate of the clamp
assembly. Remove the top clamp plate. (Fig I)
NOTE: The two screws retaining the top cover
plate are of a different length and MUST be
replaced in the same position. The longer screw
is the 10mm Hex headed bolt. (F i g J )
2. The J handle (12) will sit in the recess of the
J handle clamp, but the locating screw in the
recess must locate in one of three holes in the
J Handle tube i.e select the length of the J handle
required and locate the J handle in the clamp
recess with the locating screw entering one of the
three holes in the J handle tube. (Fig K & L)
L .K .
I.
Hex head
screw
J.
Hex head
screw
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
16
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
3. Re-fit the J handle clamp plate on top of the
J handle (12) and replace the screws through
the clamp plate and into the clamp. (Fig M)
Note: ensure the long hex headed screw is fitted
in the same position as was disassembled. The
longest screw should be the lower screw towards
the lower shaft. Both screws should be equally
tightened firmly on the clamp plate.
4. To change the length of the J handle (12),
repeat steps 1 – 4 above but locate the J handle in either of the other
two holes.
5. The J handle can also be moved up and down the shaft over a very short
and limited distance. There are two holes in the main shaft of which one
must locate on the locating screw on the J handle clamp.
Adjusting the J Handle up and down the Upper Shaft
1. Loosen the two clamp screws 6 full turns on the
underside of the clamp where the clamp plate
secures the clamp to the upper shaft (11), using
the supplied 5mm allen key and the 10mm open
ended spanner (36). (Fig N)
2. Lift the clamp so the location screw disengages
from the hole in the upper shaft (11). Move the
clamp to the second hole ensuring the location
screw locates into the second hole. (Fig O)
M.
N.
O.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
17
3. When the location screw has entered the location
hole, the under screws securing the clamp plate
can be tightened. Ensure the screws are equally
and firmly secured. (Fig P)
4. Check the clamp is firmly secured to the
upper shaft (11).
5. If you require further adjustment, the lower clamp
plate securing the clamp to the upper shaft (11)
can be fully removed and the clamp rotated
180°. Take note of the screws; there is one long
hex headed screw and one short screw, and they
need to be replaced in the same threaded hole in
the clamp. (Fig Q1/2)
6. Locate the locating screw in one of the location
holes in the upper shaft (11) and replace the
lower clamp plate and the two screws. (Fig R)
IMPORTANT: Ensure to replace the screws into
the clamp assembly in the same threaded hole.
There is one long screw and one short screw,
so ensure the screws are replaced as they
were removed.
7. Check the clamp if firmly secured to the
upper shaft.
IMPORTANT: Do NOT loosen both the J handle
clamp plate and the upper shaft j handle clamp
plate. Make the adjustments one at a time
ensuring the other is fully tightened before
attempting the other adjustment.
P.
Q1.
Q2 .
R .
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
18
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Fitting the Brushcutter / Line Trimmer Guard
Before using either the Brushcutter or Line Trimmer,
the Brushcutter Guard needs to be assembled.
1. Lay the unit down so that the fuel tank bracket (38) is resting on a secure
surface, or on the ground.
2. Place the brushcutter guard (17) on the
underside of the lower shaft (15) so that the
2 holes on the guard line up with the hole in
the lower shaft. (Fig. S)
3. Place the guard clamp on the top side of the
shaft lining up the 2 screw holes on the clamp
with the 2 screw holes on the brushcutter
guard (25). (Fig. T)
NOTE: There is a small dimple on the underside of
the guard clamp which when lined up correctly
will engage with the hole in the lower shaft.
4. Once the dimple is located, insert the 2 screws;
one on each side of the guard clamp, and using
the supplied 5mm allen key (36) tighten in a
clockwise direction until secure. (Fig. U)
If proceeding to use as the brushcutter, the 3T
brushcutter blade (28) needs to be assembled.
Refer to the “Fitting the Brushcutter Blade
instructions” (on page 20).
If proceeding to use the line trimmer, the clip-on
line trimmer guard attachment (33) and spool and
line assembly (35) requires assembly. Refer to the
“Fitting the Clip-on Guard Attachment to the Line
Trimmer” on page 22/23 and “Fitting the Spool
and Line assembly on the Line Trimmer” on page 23/24
for these instructions.
S.
U.
T.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
19
Fitting & Adjusting the Double Strap Shoulder Harness
WARNING. The Double strap shoulder harness (31) must be fitted
before use of the product.
This includes both combinations of the brushcutter or the line trimmer.
1. Place the shoulder straps over each shoulder so that the 2 padded shoulder
straps are located on your front side (Fig. V), with the square black plastic
support where the straps interweave, located on your back. (Fig. W)
2. Connect the clip at the front to secure the
double strap shoulder harness (31) into position
on your body. (Fig. X) NOTE: The side pad guard
will be located on your right hand side.
3. To adjust the double shoulder strap harness (31)
on your body, tighten or loosen the front straps
adjusters. (Fig. Y)
4. Ensure the metal connector clip is attached
onto the side pad guard correctly. When in the
correct position, the long metal tab (as shown in
Fig. Z with the arrow on it) needs to be holding
the metal connector clip in place.
5. To attach to the unit, insert the clip on the side
pad guard through the double strap shoulder
harness attachment point (37) (Fig. AA )
The location of the side pad guard can also be
changed by tightening or loosening the adjuster
on the side pad guard.
The double shoulder strap harness (31) is fitted with
a quick release clip which allows rapid removal of
the appliance from the harness.
To activate the quick release clip so as to remove
the appliance, “Pull the red tab thus withdrawing
the metal tab. The attaching clip will then release
from the harness.
W.
V.
X.
Y.
AA.Z.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
20
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Fitting the Brushcutter Blade
NOTE: Always ensure the engine is turned off
before undertaking this task.
NOTE: Before fitting, check the diameter of the cutter
is 255mm, and the Bore size is 25.4mm. Do NOT
proceed if the cutter is different to these specifications.
1. Lay the unit down so that the fuel tank bracket
(38) is on the ground or on a secure surface. Lift the
gearbox end of the lower shaft (15) to gain access to
the spindle (20).
2.
Place the inner flange (30) over the spindle (20)
ensuring the flats on the spindle (20) align with the flats in
the inner flange (30). Fully seat the inner flange. (Fig AB)
3. Place the 3T brushcutter blade (28) over the spindle
(20) and locate on the raised centre of the inner flange
(30). (Fig AC) . Ensure the direction of rotation of the blade as indicated by an
arrow on the blade corresponds with the arrow direction on the top of the guard.
4. Place the outer flange (29) over the spindle (20) on top of the 3T brushcutter
blade (28) (Fig. AD), followed by the protector (27).
5. Place the blade nut (26) on to the spindle (20) and thread the nut in an anti
clockwise direction all the way down to the protector (27). (Fig. AE)
6. To fully tighten the 3T brushcutter blade (28) onto the spindle (20) ensure the
3T brushcutter blade (28) is still correctly located on the inner flange (30).
7. Insert the long end of the supplied 4mm allen key (36) through the spindle lock
hole (19) and into the hole on the inner flange (30). (This locks the spindle
allowing the blade bolt to be secured) (Fig. AF)
8. Whilst holding the supplied allen key (36) in position to lock the spindle, use the
supplied blade nut wrench (36) to fully tighten the blade nut (26) and secure
the 3T brushcutter blade (28) into position. Ensure the 3T brushcutter blade (28)
is secured tight before removing the allen key (36) from the spindle hole.
AB.
AC.
AD. AE. A F.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
21
Changing/Removing the Brushcutter Blade
NOTE: Always ensure the engine is turned off before undertaking this task.
1. Lay the unit down so that the fuel tank bracket (38) is on the ground or
on a secure surface. Lift the gearbox end of the lower shaft (15) to gain
access to the output spindle (20).
2. Insert the long end of the supplied 4mm allen
key (36) through the spindle lock entry hole
(19) and into the hole on the inner flange (30).
(This locks the spindle allowing the blade bolt
to be secured). (Fig. AG)
3. Using the supplied blade nut wrench (36),
loosen the blade nut (26) by turning in a
clockwise direction (Fig. AH).
4. Remove the blade nut (26), protector (27),
outer flange (29), and 3T brushcutter blade (28)
in this order.
NOTE: If you are removing your brushcutter
blade to use the unit as a line trimmer, refer to
page 23/24 for instructions on “Fitting the Spool
and Line Assembly on the Line Trimmer.
5. Replace with the new blade and follow steps 3-8
in the “Fitting the Brushcutter blade” section.
Operation of the Brush Cutter
To commence with operation of the brushcutter, refer to the instructions
on page 30 .
NOTE: Ensure you have filled the unit with the correct fuel and oil before
proceeding to start the unit.
NOTE: This is a 4 stroke brushcutter / line trimmer. The motor MUST be filled
with 60mL of SAE 10W/30 BEFORE starting.
Fresh unleaded fuel must be used in this unit. Do NOT use ethanol based fuels.
Do NOT mix oil with fuel.
AG.
AH.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
22
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Tips for Operation
Always use the double shoulder strap harness (31) when using the
brushcutter to avoid serious personal injury.
Hold the brushcutter with one hand on the trigger handle and the other
hand on the J handle (12). Keep a firm grip with both hands while in
operation. The brushcutter should be held at a comfortable position with
the double shoulder strap attachment point (31) about hip height.
Maintain your grip and balance on both feet. Position yourself so that you
will not be drawn off balance by the kick-back reaction of the 3T brushcutter
blade (28).
When using the double shoulder strap harness (31), adjust to position the
double shoulder strap attachment point (37) on the brushcutter at
approximately hip height.
Exercise extreme caution when using the 3T brushcutter blade (28) with
this unit. Blade thrust is the reaction which may occur when the spinning
3T brushcutter blade (28) contacts anything it cannot cut. This contact may
cause the 3T brushcutter blade (28) to stop for an instant, and suddenly
“thrust the unit away from the object that was hit.
This reaction can be violent enough to cause the operator to lose control of
the unit. Blade thrust may occur without warning if the blade snags, stalls or
binds. This is more then likely to occur in areas where it is difficult to see the
material being cut.
For cutting ease and safety, approach the weeds being cut from the right to
the left. In the event that an unexpected object or woody stock is
encountered, this could cause the blade thrust reaction.
Specic Assembly for use as a Line Trimmer
Fitting the Clip-on Guard Attachment to the Line trimmer
NOTE: Always ensure the engine is turned off before undertaking this task.
Always use the double shoulder strap harness (31) when using the line
trimmer to avoid serious personal injury.
NOTE: the clip-on line trimmer guard attachment (33) must be secured to
the brushcutter guard (17) before ANY line trimming work is undertaken.
NOTE: Always ensure the engine is turned off before undertaking
this assembly.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
23
WARNING: There is a cut off knife (32) on the
clip-on line trimmer guard attachment (33).
Use gloves to fit the clip-on line trimmer
guard attachment (33) to avoid injury.
1. Lay the unit down so that the fuel tank bracket
(38) is on the ground or on a secure surface.
Lift the gearbox end of the lower shaft (15)
to gain access to the output spindle (20).
2.
Line up the tabs on the clip-on line trimmer guard
attachment (33) with the large slots on the
brushcutter guard (17). There are 2 main release
clips; one on each end of the clip-on line trimmer
guard attachment (33). This needs to line up with
the large slots on the brushcutter guard (17). (Fig AI)
3. When all tabs are lined up in position, push the
tabs on the clip-on line trimmer guard
attachment (33) into the slots, and the release
clips into the large slots. You will hear clicks when
the release clips are secure. (Fig. AJ)
NOTE: Before using the line trimmer, remove the
cut off blade protector. After using the line trimmer,
it is recommended to replace the blade protector.
Fitting the Spool and Line Assembly on the Line Trimmer
NOTE: If the unit has been used as a brushcutter first, the brushcutter
blade will need to be removed before fitting the spool and line assembly.
Refer to “Changing/Removing the Brushcutter Blade for instructions on
how to remove the blade on page 21.
NOTE: Always ensure the engine is turned off before undertaking this assembly.
1. Lay the unit down so that the fuel tank bracket (38) is on the ground or
on a secure surface. Lift the gearbox end of the lower shaft (15) to gain
access to the spindle (20).
IMPORTANT: Ensure the inner flange is mounted on the spindle of the
line trimmer.
The outer flange (29), the protector (27), the 3T brushcutter blade (28)
and the blade nut (26) are NOT required when the line trimmer spool
& line assembly (35) is being fitted.
AI.
AJ.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
24
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Keep these components in a safe place. The 3T
brushcutter blade (28) should be placed back in
the cardboard packaging/envelope.
2. Place the spool and line assembly (35) on the
spindle (20) and thread on to the spindle finger
tight in an anti clockwise direction all the way
down untill the back of the spool makes contact
with the inner flange (30). (Fig AK)
3. Insert the long end of the supplied 4mm allen
key (36) through the spindle lock entry hole (19)
and into the hole on the inner flange (30).
(This locks the spindle allowing the spool and
line assembly (35) to be secured). Further tighten
the spool and line assembly (35) ensuring the
assembly is tight on the spindle (20) and inner
flange (30) before removing the 4mm allen key
from the spindle hole to release the spindle
being locked. (Fig. AL)
Removing the Spool and Line Assembly
NOTE: Always ensure the engine is turned off before undertaking this assembly.
1. Lay the unit down so that the fuel tank bracket (38) is on the ground or
on a secure surface. Lift the gearbox end of the lower shaft (15) to gain
access to the output spindle (20).
2. Insert the long end of the supplied 4mm allen key (36) through the
spindle lock entry hole (19) and into the hole on the inner flange (30).
(This locks the spindle allowing the spool and line assembly to be
removed). (Fig. AL)
3. Loosen the spool and line assembly (35) in a clockwise direction until it
can be removed from the spindle (20). Remove the allen key (36) locking
the spindle (20) once the spool and line assembly (35) has been removed.
NOTE: If replacing the spool and line assembly (35) with the supplied
additional assembly, follow the “Fitting the Spool and Line Assembly on the
Line Trimmer” instructions on the previous page.
If replacing just the spool line on the supplied spool and line assembly,
refer to the instructions following this section.
AL.
AK.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
25
Changing the line only on the Spool and Line Assembly
NOTE: Always ensure the engine is turned off before undertaking this
assembly.
NOTE: The spool and line assembly supplied with
this product requires1 length of 2.4mm diameter
nylon cutting line with a length NOT EXCEEDING
2.8 metres long. Do NOT attempt to fit larger
diameter line or length longer than 2.8 metres
as this will prevent the bump feed to operate
correctly.
1. Whilst holding the spool and line assembly (35)
with the bump knob (34) facing upwards, push
in the 2 side outer parts of the assembly in
between where the 2 ribs protrude on
each side.
When pushing in both sides at the same time
the spool cover can be removed. Ensure the
lines protruding from the eyelets are carefully
pulled out when you remove the inner spool.
(Fig. AM)
NOTE: When removing the spool, there is a
large spring + 1 washer located on each end
of the spring. Do not lose these. (Fig AN)
2. Remove any remaining line in the spool.
3. Prior to fitting the line into the spool and line
assembly (35), the line needs to be prepared.
Take a 2.8 metre length of 2.4mm line and halve
it. Inspect each end of each line and ensure the
line has no burrs from being cut.
4. Fold the full length of line in half and place the
half way mark of the line into the notch in the
spool (Fig. AO)
AO.
AM.
AN.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
26
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
5. Wrap the line around the inside of the spool
(following the directional arrow on the
underside of the spool as indicated by the
“WIND CORD” and arrow). Ensure the line is
wrapped tightly and neatly. (Fig. AP)
6. When there is approximately 150mm of line left,
lock one of the lines into one of the line location
notches in the spool head and the other into
the opposing notch (Fig. AQ).
7. With the spring fitted onto the spigot of the
spool holder, insert the spool back into the
holder. As you insert the spool, thread the lines
through the eyelets (Fig. AR)
Make sure the metal washers are on each end
of the spring so the spring does not run on the
plastic surfaces.
NOTE: When inserting the spool into the
housing, the spool may need to be rotated
slightly so as to locate into the housing.
Push firmly to ensure the inner spool of line is
fully inserted into the spool cover. This will also
unclip the line from the inner notches.
8. With the inner spool firmly held in place, the
outer cover needs to be fitted. Fit the outer
cover over the bump knob (34) by transferring
the pressure on the bump knob (34) from one
thumb to the other thumb through the centre
of the outer cover. (Fig AS)
9. Align the cover with the rear spool cover and
push and clip into position. (Fig AT)
When the cover is in place pull on the lines to
ensure the line is free from the inner notches.
If you are in doubt, refer to the section
Advancing the line manually” on page 27 and
ensure the line is feeding.
RECHECK and ensure the outer cover is fully
clipped in place.
To install the spool and line assembly (35), refer
to ‘Fitting the Spool and Line Assembly on the
Line Trimmer instructions on page 23/24.
AS.
AT.
AR.
A P.
AQ.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
27
Prior to operating the line trimmer after line has been added, it is suggested
to trim the lines so they are even and just short of the cutting blade on the
guard. This prevents a possible large section of line being trimmed at high
speed. When you start the line trimmer, bump the head of the spool on the
ground to enable the cut off knife on the guard to cut the line to the
required length for use.
Operation of the Line Trimmer
To start the line trimmer, refer to the instructions on page 30 .
NOTE: This is a 4 stroke brushcutter / line trimmer.
The motor MUST be filled with 60mL of SAE 10W/30 BEFORE starting.
Fresh unleaded fuel must be used in this unit.
Do NOT use ethanol based fuels. Do NOT mix oil with fuel.
Use of the Line trimmer
This petrol line trimmer is only made to cut grass.
• Alwaysusethedoubleshoulderstrapharness(31)
when using the line trimmer to avoid serious personal injury.
• Performafewaccelerationsofthemotorwithoutreachingmaximum
speed and without working to make sure that
everything is in good working order.
• Starttheengineonlywhenyouarecloseto
the working area.
• Placeyourselfinawellbalancedposition,
stable on both feet.
Advancing the line manually
NOTE: Always ensure the engine is turned off
before undertaking this task.
1. Push the bump knob (34) in while pulling on
both lines to manually advance the line. (Fig. AU)
2. Release the bump knob and again pull on both
lines to advance the line further. (Fig. AV)
3. If the line still does not advance remove the
spool and check the lay of the line. It may be
twisted or trapped under over laying line.
AU.
AV.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
28
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Tips for operating the Line Trimmer
IMPORTANT. Petrol line trimmers transmit vibrations to the operator during
use. These vibrations can generate increased fatigue. For this reason, we
recommend taking regular breaks during work. We also recommend taking
a break after a few hours of work to rest the engine. If abnormal noise or
vibration occurs during operation, turn the line trimmer off immediately and
have the problem corrected.
Keep a firm grip on the trimmer with both hands while in operation.
The trimmer should be held at a comfortable position with the rear handle
about hip height.
Always operate the trimmer at full throttle. Cut tall grass from the top down
to prevent grass from wrapping around the spool which may cause the
trimmer to overheat.
NOTE: If grass becomes wrapped around the spool, stop the engine,
disconnect the spark plug wire, and remove the grass.
Tips for cutting
WARNING.
Beware of bystanders at all times
• Cutthegrasslikeyouareinacorridorabout1.5mwide.
Move step by step, moving the machine from left to right and vice-versa.
Make sure at each step that you are still well balanced on your feet
• Keepthelinetrimmertiltedtowardstheareabeingcut
• Letthetipofthelinedothecutting.Neverforcethespoolinto
uncut grass.
• Runningthelineintofences,stoneandbrickwalls,curbs,andwood
causes extra line wear, even breakage.
• DoNOTrunthebumpknob(34)onthegroundduringthecutting
process. The bump knob (34) should only touch the ground when the
bump knob (34) is tapped on the ground to extend the cutting line.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
29
Feeding the line
The line trimmer has a bump feed mechanism which releases the line
without having to stop the engine.
1. To release additional line increase the speed of the motor to no less than
half speed, then, lightly tap the bump knob (34) on the ground while
operating the unit at high speed.
NOTE: Always keep the line fully extended for optimum cutting
performance. Line release becomes more difficult as the cutting line
becomes shorter. Cutting efficiency also decreases as the line
becomes shorter.
The line will not extend if the speed of the spool is not operating at least
half speed. If the line does not extend, increase the speed to full speed while
tapping the bump knob on the ground. If the line still does not extend, stop
the motor and check the line inside the spool has not tangled and
also ensure there is sufficient line in the spool.
2. Each time the head is bumped it releases approximately 2cm of line.
Release the line until it strikes the cut off knife (32). This may require
several taps.
NOTE: The cut off knife (32) on the clip-on line trimmer guard attachment (33)
will automatically cut off any excess line. For best results tap the head on hard
soil or bare ground. Never bump the spool head on concrete as it may crack the
spool housing. Make sure the cut off knife (32) protector has been removed.
It is recommended to replace the protector when the line trimmer is not in use.
IMPORTANT. Do not hit stones (even small ones), piles of earth, and small
pieces of wood or anything else that could be hidden or poorly visible in the
grass. If you hit a large object by accident, or if you jam the cutting tool due
to overloading or having the cutter jammed with grass, you must stop the
engine.
NOTE: All protective devices of the machine as well as protective equipment
must be maintained in good operation condition during the period of use.
NOTE: If the line is too short you may not be able to advance the line by
tapping it on the ground. If this is the case, stop the engine and manually
advance the line.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
30
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Operation of the Brushcutter / Line Trimmer
Fuelling
IMPORTANT: Fuel goes off after about 3-4 months. If you find your unit does
not start, first change the fuel in the tank with newly purchased fuel.
WARNING: Do not refill fuel tank while engine is running or is hot.
Move at least 10m away from the refuelling site before starting engine.
NOTE. Do not use fuel that contains ethanol. Use fresh unleaded fuel.
Do not smoke when refuelling or operating the product.
• Becarefulnottoadmitdust,dirt,waterorotherforeignobjectsinto
the fuel.
• Wipeospiltfuelthoroughlybeforestartingengine.
• EnsureyouDONOTfueltheunitincloseproximitytoanyopenames,
lit cigarettes, or hot objects.
1. Unscrew the fuel tank cap (5) and pour
fresh unleaded fuel into the tank with the aid
of a funnel. (Fig. AW)
NOTE: The fuel tank capacity is 800mL.
Be careful not to spill any mixture. If this
happens, wipe the spill with a clean rag.
2. Replace the fuel cap (5) taking care NOT to cross
thread the cap on the fuel tank (6). Tighten the
cap firmly in a clockwise direction.
3. When starting the engine ensure it is at least 10m away from the area
where the fuel tank has been filled up in order to avoid any risk of fire.
• Alwaysuseextremecarewhenhandlingfuel!Fuelishighlyammable.
• Neverattempttofueltheproductifthefuelsystemcomponentsare
damaged or are leaking.
• Neverattempttorefueltheenginewhileitisrunningorstillwarm,
allow it to cool before fuelling.
• Neversmokeorlightanyresneartheproductorfuels.
AW.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
31
• Alwaystransportandstorefuelsinanapproved
container.
• Neverplaceammablematerialclosetothe
engine muffler.
• Neveroperatetheproductwithoutaproperly
functioning muffler and spark plug cover
installed.
• Neveroperatetheproductunlessitisproperly
assembled and in good working condition.
• Donotusefuelwhichcontainsethanolor
methanol as it may damage the fuel lines and
other engine parts. Use fresh unleaded fuel.
Starting the Brushcutter / Line Trimmer
Choke control
Start position (choke closed)
Run position (choke open)
1. Press the on/off switch (10) to the on position
marked with a “I”.
2. Move the choke (red lever) (22) upwards to the
full choke or cold start position. (Fig. AX)
NOTE. This is not required if the engine is
already warm.
3. Push the priming bulb (23) 6-10 times, until
the priming bulb fills with fuel mixture and
excess fuel is pumped down the bypass tube
when the bulb is pressed. (Fig AY)
NOTE. For cold starting this is an important step.
4. Check the ignition on/off switch (10) is on.
(“I” pressed down). Pull the recoil starter (2) lightly until you feel resistance
then pull quickly until the engine starts. (Fig. AZ) (Under full choke it may
only run for 1 or 2 seconds).
AX.
AY.
AZ.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
32
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
5. Push the choke (red lever) (22) half way down and allow the motor to
warm up. Restart if the motor stops.
Do not pull the cord with a jerk or release it until fully rewound. Provided
the previous steps have been performed, the motor should start.
6. Once the engine is fully warm ensure the choke (red lever) (22) is down fully
to the run position (warm start).
Warm Start
When re starting the unit after it has been used and the motor is hot, there is no
need to engage the choke (red lever) (22). Follow steps 4, 5, and 6 above.
A Flooded engine
If the choke (red lever) (22) has been left in the full choke position and the
engine will not start, it is possible the engine has been flooded (Too much fuel).
To assist to clear a flooded engine:
1. Move the choke (red lever) (22) to the run or warm start position.
2. Squeeze the safety lever (9), and pull on fully the throttle trigger (8).
3. Check the on/off switch (10) is on.
4. Pull the recoil starter (2) a number of times to clear the fuel and start the motor.
WARNING. Be aware that if starting occurs with the throttle pressed,
the motor will accelerate and thus engaging the clutch, which will then
rotate the cutting head.
As soon as the motor starts release the throttle so the motor runs at idle
speed and disengages the clutch.
Adjusting the speed on the Brushcutter / Line Trimmer
NOTE: The cutting head (spool and line) will not rotate at the idle speed.
The cutting head (spool and line) will engage and rotate when the speed of
the motor is increased.
1. To increase speed and engage the cutting
head, squeeze the safety lever (9) and then
throttle trigger (8). (Fig. BA)
2. To decrease the speed, slowly release the
throttle trigger (8) to the desired speed.
3. To disengage the cutter head (spool and line),
release all pressure on the throttle trigger (8)
and allow the motor to return to idle. The cutter
head (spool and line) will disengage at idle.
BA.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
33
NOTE: Be aware that when using the 3T brushcutter blade (28), it will take a
few seconds to run down.
IMPORTANT: If the cutting head (spool and line) does not disengage and stop
when the throttle is in the idle position, TURN OFF the petrol motor and have
the unit checked at a service centre.
Stopping the Brushcutter/ Line Trimmer
1. Release the throttle trigger (8) and allow the engine to idle for a
few moments.
2. Move the on/off switch (10) to the off position marked with “STOP”.
3. The engine will now stop.
Running in the engine
1. During the first 2–3 hours of work, run the engine at a moderate RPM.
2. We advise you in any case not to maintain your engine at a high speed as
the different components must settle with each other during the process
of running in the engine.
3. It is at the end of the running in period that the engine will reach its
maximum power.
4. After the first two hours of work, stop and make sure that all nuts and
screws are securely fastened, and tighten them if necessary.
Maintenance & Cleaning
WARNING. The engine of the petrol brushcutter / line trimmer must
be at a complete stop during assembling, repair and cleaning
operations that could be necessary.
General inspection
Regularly check that all the fixing screws are tight. They may vibrate loose
over time.
Always check when first starting the motor for each use that the cutting
head is not rotating under the power of the motor when the motor is at idle.
Do not perform any maintenance procedures with the motor in operation.
Ensure the motor has stopped, and the on/ off switch is in the STOP position.
The spark plug lead should be removed from the spark plug.
Only use original Gardenline replacement parts when component parts
require replacement.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
34
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Repairs
Repairs beyond those described above, should only be undertaken by
trained personal. Should a malfunction occur do not use the unit any further
and do not attempt to repair it yourself. Contact Customer Service or have
the unit repaired by an approved Service Agent.
Maintenance
Air lter
Accumulated dust in the air filter will reduce engine efficiency, increase fuel
consumption and allow abrasive particles to pass into the engine.
Remove the air filter as often as necessary to maintain a clean condition.
•Removetheairltercover(3)bypressinginthesingletabandpullingthe
filter cover towards you. Then remove the filter cover fully by unlatching
the 2 hinges at the bottom.
•Lightsurfacedustcanreadilyberemovedbytappingthelter.
•Heavydepositsshouldbewashedoutinsuitabledetergent.
•Donotusepetrolorotherchemicalcleaners/solvent.
•Squeezeouttheremainingwaterandallowtheltertocompletelydry.
•Addadropofthinoiltothelterandreplaceit.
•Theairltershouldbechangedafterapproximatelyevery50hoursor
sooner when used in high dust environments.
Replacement air filters are available for purchase from our website
www.extrabattery.com.au.
Fuel Filter
•Thefueltankisttedwithalter.
•Filterissituatedatthefreeendoffuelpipeandcanbepickedoutthrough
fuel port with a piece of hooked wire or the like.
•Checkthefuellterperiodically.Donotallowdusttoenterthefueltank.
Clogged filter will cause difficulty when starting engine or abnormalities in
engine performance.
•Whenthelterisdirty,replacethelter.
•Whentheinsideofthefueltankisdirty,itcanbecleanedbyrinsingthe
tank out with petrol.
•Thefuelltershouldbechangedonlywhenitisshowingsignsof
blockage or there is insufficient fuel being supplied to the motor.
Replacement fuel filters are available for purchase by from our website
www.extrabattery.com.au.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
35
Checking the spark plug
Check the spark plug every 10–15 hours of use.
1. Remove the spark plug cover (1).
Note: It is recommended to remove the air filter cover (3) first before
removing the spark plug cover as the spark plug lead is held in position
under the air filter cover and by removing the air filter cover there is easier
access to remove the spark plug cover.
2. Use the supplied spark plug tube spanner and wrench (36) to remove
the spark plug, by turning it anti-clockwise. (Fig BB)
3. Clean and adjust the spark plug gap
to 0.6 – 0.7mm.
Replace any damaged or visibly worn plug with
a Torch A5RTC, NGK CR5HSA or CR5HSB spark
plug, as listed in the specifications table.
4. Install the spark plug finger tight in the cylinder
head, then tighten it firmly with the spark plug
tube spanner and wrench.
Replacement spark plugs can be purchased
from your local Lawnmower or small engine store.
Servicing
• Itisrecommendedonceyourstuseyourproducttogetitservicedafter
15 hours of use.
• Fromthereafter,servicetheproductevery2years.
BB.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
36
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Storage and maintenance after use
• Whenyounishworking,cleantheunitcompletely,makingsurethere
is no grass or dirt wrapped in the cutting tools, and put it back into its
package in order to avoid its hurting you or other people during
transport.
• Beawaretonothitorcutthefueltankwhileyouputitontotheground.
Do not let the unit fall down to the floor or it may damage the machine.
• Storetheunitawayfromdirectsunlight.
• Donotstoreinanylonbagasthiscanencouragetheformationofmould.
• Attheendoftheseason,givetheunitanoverallcleaninganda
thorough check.
• Donotleavetheunitrestingontheoorforextendedperiodsasitcould
cause the shape of the guard to alter, posing a safety risk. Hang it off the
floor by the top handgrip.
Whenever the machine is not used for a long period of time,
proceed as follows:
• Emptythefuelandoiltankcompletely.
• Protectallmetalenginepartsfromcorrosionbycoatingthemwithoil.
• Removethesparkplug,putafewdropsofoilintothecylinderandthen
pull the recoil starter 2 to 3 times in order to distribute the oil evenly.
Replace the spark plug.
Warranty
Your new Gardenline® Brushcutter / Line Trimmer will more than satisfy your
expectations. It has been manufactured under stringent Gardenline®
Quality Standards to meet superior performance criteria.
You will find your new Brushcutter / Line Trimmer easy and safe to operate, and,
with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before using your
new Gardenline® Brushcutter / Line Trimmer.
Take special care to heed the Cautions and Warnings.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
37
Your Gardenline® Brushcutter / Line Trimmer has many features that will make your
job faster and easier. Safety, performance, and dependability have been given top
priority in the development of this Brushcutter / Line Trimmer, making it easy to
maintain and operate.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local
recycling centre and disposed of in an environmentally safe way.
What your 3 year warranty means
Great care has gone into the manufacture of this product and it should therefore
provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of the first
3 years after the date of purchase, we will remedy the problem as quickly as possible
once it has been brought to our attention. In the unlikely event of such an
occurrence, or if you require any information about the product please contact us
via our after sales support services, details of which can be found in this manual
and on the product itself. After Sales Support TEL: 1800 909 909
Service Support
If you are having difficulty in using your product, you can find instructional Know
How videos on our website, www.powertoolsupport.com, by clicking on the
Product Assistance tab > How To product Videos.
If you have any issues with the operation of your product, please take it with a copy
of your receipt to one of our National Service Agents for repair or call us
1800 909 909 for advice.
A listing of our Service Agents is included with your product, however, you can also
find our most updated listing on our website www.powertoolsupport.com,
by clicking on the Service Agent link.
Accessories
The following accessories are available for purchase by visiting
www.extrabattery.com.au or calling our customer service hotline on: 1800 909 909
•ReplacementSpoolandLineAssembly(49290-SPL)
•Replacement3TBrushcutterBlade(49290-3TB)
•ReplacementAirFilter(49290-AF)
•ReplacementFuelFilter(49290-FF)
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
38
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
Troubleshooting
Problem
Possible Cause Solution
Power loss or
sudden stopping
of the engine
Fuel Tank (6) is empty
The mixture does not reach the
carburettor.
There is water in the mixture.
The air filter (3) is dirty.
There are carbon deposits in the cylinder
exhaust pipe or the muffler.
Flooded engine.
Check whether the fuel tank (6) is empty
and refuel if required.
NOTE: If the trimmer is being used a lot on
its side, the tank may require a minimum of
1/4 tank of fuel.
Clean the fuel filter in the fuel tank (6).
Drain and rinse the fuel system.
Refill the fuel tank (6) with new
uncontaminated fuel.
Clean the air filter (3).
Clean or change the muffler.
Take the product to a Service Agent.
Move the choke to the run or Hot start
position and restart the unit.
Bad quality cut from
the line trimmer
Overloaded cutting due to too high
grass or too thick for engine power.
Wrapped vegetal material on the
cutting tool.
Line will not advance.
Line welded to itself.
Not enough line on the spool.
Line worn too short.
Line tangled on spool.
Cut tall grass from the top down.
Clean the material from the spool and line.
Manually advance the lines.
Open the spool and line assembly (35) and
ensure the lines have not crossed or tangled.
NOTE: Always ensure the engine is turned
off before undertaking this task.
Lubricate with silicone spray.
Manually advance the lines.
NOTE: Always ensure the engine is turned
off before undertaking this task.
Install more line.
NOTE: Always ensure the engine is turned
off before undertaking
this task.
Pull lines while alternately pressing down
on and releasing bump knob (34).
Remove line from the spool and rewind.
Engine does not
reach full speed
Check the fuel.
Check oil reservoir (24) level.
Check spark plug (1).
Use fresh fuel. Do not use ethanol based fuel.
Top up the oil if it is low.
Clean or replace if dirty or worn.
3T Brushcutter
Blade (28) rotates
at idle speed.
The Blade is not securely fitted.
The blade only rotates on run down of
the motor. i.e 5 seconds.
At idle the 3T brushcutter blade (28) is
rotating under power from the motor.
Ensure the blade nut is tightened (26)
This is normal but should not continue to
rotate under power from the motor at idle.
Immediately turn off the motor and take
the product to an authorized
Service Agent.
DO NOT continue to use the product.
For other issues not covered in this chart, please call Customer Service on 1800 909 909.
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
39
Recycling
Environmental protection
Recycle unwanted materials instead of disposing of them
as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an
environmentally safe way.
Specications
Engine: 31cc, 4 stroke
Rated Power: 0.7KW/6500kw
Max. engine speed: 95 00 min-1
Idle speed: 2800 - 3200 min-1
Fuel tank capacity: 800 mL
Fuel: Unleaded Fuel
(Do not use fuel that contains ethanol.)
Oil Reservoir Capacity: 60mL
Oil: 4-Stroke Oil
(SAE 10W/30 is recommended)
Spark Plug type: Torch A5RTC
Equivalent Spark Plug type: NGK CR5HSA, NGK CR5HSB
Line Trimmer
Cutting diameter: 420mm
Cutting line: 2.4mm
Spool type: Bump feed, twin line
Total length of line: 2.8m
Brushcutter
Blade cutting width: 255mm
Blade type: Tri-Metal, 3T
255mm Diameter x 25.4mm Bore
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
40
MODEL: WLBCF310 • 08/2015 • 49290
1800 909 909 (toll free)
e-mail: help@powertoolsupport.com
ALDI guarantees that our exclusive brand products are developed to
our stringent quality specifications. If you are not entirely satisfied with this
product, please return it to your nearest ALDI store, within 60 days from
the date of purchase, for a full refund or replacement, or take advantage of
our after sales support by calling the supplier’s Customer Service Hotline.
Made in China
Gardenline® is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gardenline WLBCF310 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info