Bedienungsanleitung Gardol GAM-E43Li (Seite 23 von 324) (Alle Sprachen)

724327

Zoom out

Zoom in

Vorherige Seite

1/324

Nächste Seite

- 23 -

Residual risks

Even if you use this electric power tool in

accordance with the instructions, certain

residual risks cannot be eliminated. The fol-

lowing hazards may arise in connection with

the equipment‘s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is applied.

Warning!

This equipment generates an electromag-

netic ﬁ eld during operation. Under certain

circumstances this ﬁ eld may actively or pas-

sively impede medical implants. To reduce

the risk of serious or fatal injuries, we recom-

mend persons with medical implants to con-

sult their doctor and the manufacturer of the

medical implant prior to using the equipment.

5. Before starting the equipment

The lawn mower is delivered partly assembled.

The push bar and the grass basket must be as-

sembled before using the lawn mower. Follow the

instructions step by step and refer to the pictures

when assembling.

Mounting the push bar (Fig. 3 to 7).

Insert the push bar holder (Fig. 2/Item 3) into

the handlebar mount and secure with the quick

clamping function (Fig. 2/Item 11) (Fig. 4). Now

mount these assembled components on the re-

levant axle. The top push bar (Fig. 1/Item 2) must

be pushed onto the push bar holders (Fig. 2/Item

3) and secured as shown above in Fig. 6. Then

attach the power cable to the push bar (Fig. 7/

Item A) using the cable clips (Fig. 2/Item 13). Now

you can select the push bar height in three stages

(Fig. 5/Item A).

Note!

The handle height may be adjusted only within

the marked range.

•

Press in the long handle and secure in the

desired position using the quick clamping

function (Fig. 5/Item B)

Warning!

Always set the identical handle height on both

sides.

•

Use the cable clips to align the cable to the

long handle (Fig. 7/Item A)

Fitting the grass box (see Figs. 8 to 10)

First plug the lower part of the housing (Fig. 2/

Item 15) and the right part of the housing (Fig. 2/

Item 18) together as shown in Fig. 8. Then plug

the top part of the housing (Fig. 2/Item 17) onto

the previously assembled parts (Fig. 9).Before

you ﬁ t the grass basket you must ensure that the

motor is switched oﬀ and the blade is not rotating.

Lift the ejector ﬂ ap (Fig. 10/Item A) with one hand.

With the other hand, hold the grass basket by the

handle and hook it in from above (Fig. 10).

Filling level indicator of the grass collector

The grass box is equipped with a ﬁ lling level in-

dicator (Fig. 2/Item 16). which is opened by the

airﬂ ow that the lawn mower generates during ope-

ration. If the ﬂ ap closes during mowing, the grass

collecting device is full and must be emptied. To

ensure the proper functioning of the ﬁ lling level

indicator, the holes under the ﬂ ap must always be

kept clean and passable.

Adjusting the cutting height

Caution!

Adjust the cutting height only when the machine

has been switched oﬀ and the safety plug has

been pulled out.

Before you begin to mow, check to ensure that the

blade is not blunt and that none of the fasteners

are damaged. To prevent any imbalance, replace

blunt and/or damaged blades. To carry out this

check, ﬁ rst switch oﬀ the motor and pull out the

safety plug.

The cutting height is adjusted as follows (see Fig.

11):

1. Push the lever (A) outwards.

2. Set the lever (B) to the desired cutting height.

3. Release the lever (A) and check that it is se-

curely seated in the lock.

Reading oﬀ the cutting height

The cutting height can be set between 25-75 mm

in 6 intervals, and can be read oﬀ on the scale

(Fig. 11/C).

Anl_GAM_E_43_Li_SPK7.indb 23Anl_GAM_E_43_Li_SPK7.indb 23 06.10.15 07:5706.10.15 07:57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardol GAM-E43Li Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info