Bedienungsanleitung Garmin AIS 600 (Seite 2 von 12) (Englisch)

501979

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

2 AIS 600 Instructions

Programming the AIS 600

Before the AIS 600 can be used on a boat, it must be programmed

with a unique MMSI number and with additional vessel-specic

static data. The MMSI number must be programmed by an

authorized marine-electronics dealer or installer. Use the AIS 600

Setup Software on the included CD-ROM to program the AIS 600.

Notice

In the USA, it is prohibited under FCC regulations to enter

incorrect or improper data, and it is prohibited for any person

other than the manufacturer or the installing dealer to input

MMSI data.

It is a violation of the rules of the Federal Communications

Commission to input an MMSI that has not been properly assigned

to the user, or to otherwise input any inaccurate data in this device.

Preparing the AIS 600 and the PC for

Programming

PC Requirements

Microsoft

Windows

2000 or newer; minimum 32 MB of RAM;

minimum 10 MB of free hard-drive space.

Installing the AIS 600 Setup Software:

1. Insert the CD-ROM provided with the AIS 600 into your computer.

The Installation Wizard for the AIS 600 Setup Software runs

automatically.

NOTE: To run the AIS 600 programming Setup Software installer

manually, run the Setup.exe le on the CD-ROM.

2. Follow the on-screen instructions to install the AIS 600 Setup

Software on your computer.

Connecting the AIS 600 to a PC for programming:

1. Connect the AIS 600 transceiver box to a 12 or 24 Vdc power

source using the power/data cable (see page 5).

NOTE: To ensure that the AIS 600 device powers on for

programming, connect the red wire from the power/data cable to

the positive (+) terminal of the 12 or 24 Vdc power source, and

connect both the black wire and the yellow wire from the power/

data cable to the negative (-) terminal of the 12 or 24 Vdc power

source.

2. Use the included mini USB cable to connect the USB port on the

AIS 600 transceiver box to a USB port on your computer. The

Windows Found New Hardware Wizard runs automatically.

3. Follow the on-screen instructions to complete the Found New

Hardware Wizard.

NOTE: If the Found New Hardware Wizard does not successfully

install the driver, open the Driver folder on the CD-ROM and run

CDM20600.exe to install the AIS 600 driver on your computer.

Assigning Data to the AIS 600

The AIS 600 must be programmed with a valid vessel MMSI

number before use. Until a valid MMSI number is programmed, the

AIS 600 will operate in silent mode only. When in silent mode, the

AIS 600 will not transmit position data, although it can still receive

AIS signals. Optionally, the AIS 600 transmits the following static

vessel data when assigned:

• Vessel name

• Vessel call sign

• Vessel type

• Vessel dimensions (including the location of the GPS antenna on

the boat)

To begin communication with the AIS 600:

1. Ensure that the AIS 600 transceiver box is connected to a 12 or

24 Vdc power source using the power/data cable, and that the

AIS 600 is connected to the PC using the included mini USB

cable.

2. Launch the AIS 600 Setup Software. An icon was placed on the

desktop when you installed the software.

3. Click Connect in the Connection and Status window.

To assign an MMSI number to the AIS 600:

NOTE: After you save the assigned MMSI number to the AIS

600, the MMSI number cannot be changed.

1. On the Static Data tab of the AIS 600 Setup Software, enter a

nine-digit MMSI number in the MMSI eld.

2. Click Save data to AIS600.

To program static vessel data on the AIS 600:

NOTE: Vessel static data, unlike an MMSI number, can be

reprogrammed if necessary.

1. On the Static Data tab of the AIS 600 Setup Software, enter the

vessel name, the vessel call sign, the type of vessel, and the

location of the GPS antenna on the vessel.

2. Click Save data to AIS600.

To complete the programming process:

1. From the File menu of the AIS 600 Setup Software, select Exit.

2. Disconnect the AIS 600 transceiver box from the computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin AIS 600 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin AIS 600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info