Bedienungsanleitung Garmin Alpha 10 (Seite 9 von 22) (Englisch)

772766

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Acquiring Satellite Signals

NOTICE

This device is intended for outdoor use only. Satellite reception requires a clear line of sight to the sky. GPS

accuracy may be affected if you use the device indoors.

Both the dog collar device and the handheld device must acquire satellite signals before you put the dog collar

device on your dog. Acquiring satellite signals can take a few minutes.

1Go outdoors to an open area.

2Turn on both devices (Turning On the Device, page 4).

3On the handheld device, select a paired collar with the Thumb Stick controller.

When the dog collar device has acquired satellite signals, the status LED flashes a double-blink or triple-blink in

green. When the handheld device has acquired satellite signals and communicated with a paired dog collar

device, it displays status information for the dog collar device (Handheld Device Screen, page 9).

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that

influence magnetic fields, such as vehicles, buildings, and overhead power lines.

You should calibrate the compass after moving long distances or experiencing temperature changes.

1Press the menu button.

2Select Calibrate Compass.

3Follow the on-screen instructions.

Dog Collar Device Setup

Methods to Add a Dog Collar Device to a Handheld Device

You must add the dog collar device to the handheld device. You can add up to 20 devices to one handheld

device by using MURS/VHF, entering the track and control codes, or by sharing wirelessly using ANT+®

technology. Up to 20 devices can be active at one time.

Using MURS/VHF: Allows you to add a dog collar device after you have placed the dog collar device into pairing

mode by pressing the power key.

This method is helpful when you are adding a new accessory collar to the system prior to leaving for the hunt

(Adding a Dog or Contact Using Wireless Pairing, page 6).

Entering the track and control codes: Allows you to add a dog collar device that you do not own and that is not

in the area. The dog's owner must determine if you can only track the dog or can track and control the dog.

This method requires the dog's owner to find and communicate the codes to the person adding the dog collar

device.

This method is helpful when you would like to add a dog collar device during a hunt, but you are not near the

dog. For example, you are adding another member of your hunting party's dog collar device to your handheld

device, but you do not own the dog collar device (Adding a Dog Using the Track and Control Codes, page 7).

NOTE: This feature varies based on dog collar device type and feature availability in your area. You may see

track codes only or track and control codes.

Dog Collar Device Setup 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Alpha 10 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Alpha 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info