Bedienungsanleitung Garmin Alpha 200i (Seite 8 von 28) (Englisch)

740417

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Finding the Dog ID and Track and Control Codes

You can share a dog’s track code so another person can track

your dog. Also, you can share a dog’s control code so another

person can track and train your dog.

Select Dog List.

Select a dog.

The track code and the control code are displayed under the

dog's name.

VHF Radio Information

This product may be used only on specific radio frequencies,

which vary depending on the country of use. The handheld

device and the dog device allow the user to install a different

antenna. Changing the antenna can result in improved radio

performance and higher radiated power. You must not use the

device with a third party antenna or an antenna not approved by

Garmin

. Go to www.garmin.com/tracking-legal for details about

the performance and radio frequency of this product, lawful

accessories, and power limits for countries.

Managing a Group

Before you can create a group, you must pair one or more dog

devices to your handheld.

Select Dog List.

Select .

If necessary, select Create Group, and enter a group name.

Select a group from the list.

Select an option:

• To activate the group, select Activate Group.

• To deactivate the group, select Deactivate Group.

• To add a device to the group, select Manage Group >

Add Device.

• To rename the group, select Rename, and enter a new

name.

• To delete the group, select Delete Group.

Editing Dog Information

Resetting a Dog's Statistics and Track

You might want to clear the dog statistics and track before a

new hunt.

Select Dog List.

Select a dog.

Select > Reset.

Changing the Dog Name

Select Dog List.

Select a dog.

Select the dog’s name.

Enter the name, and select .

Changing the Color of the Dog's Track

You can change the track color of the dog. It is helpful to have

the track color match the color of the collar strap, if possible.

Select Dog List.

Select a dog.

Select the colored square next to the dog’s name.

Select a color.

Changing the Dog Type

Before you can change the dog type, the collar must be turned

on and within range of the handheld device.

Select Dog List.

Select a dog.

Select > Change Dog Type.

Select a dog type.

Changing the Dog ID

Before you can change the dog ID, the collar must be turned on

and within range of the handheld device.

If you are experiencing interference from other collars or

handheld devices in the area, you might need to change the ID

for the dog.

Select Dog List.

Select a dog.

Select > Change ID.

Select an available ID.

If another handheld device is tracking this dog, for best results,

remove the dog from the device, and use the track and control

codes to add the dog again (Adding a Dog Using the Track and

Control Codes, page 3).

Removing a Dog

Select Dog List.

Select a dog.

Select > Remove.

Fitting the Collar on Your Dog

CAUTION

Do not spray the device or collar with harsh chemicals including

but not limited to flea or tick spray. Always ensure that any flea

or tick spray that is applied to the dog is completely dry before

placing the collar on the dog. Small amounts of harsh chemicals

can damage the plastic components and collar laminate.

Before you can put the collar on the dog, you must pair the

handheld device and collar (Adding a Dog to the Alpha

Handheld Using Wireless Pairing, page 3), and acquire satellite

signals (Acquiring Satellite Signals, page 2).

Position the collar with the communication antenna pointing

up, the GPS antenna facing up, and the LEDs facing forward.

Place the collar around the middle of the dog's neck.

Tighten the strap so it is snug around the dog's neck.

NOTE: The collar should fit tightly and should not be able to

rotate or slide on the dog's neck. The dog must be able to

swallow food and water normally. You should observe your

dog's behavior to verify the collar is not too tight.

If the strap is too long, cut off the excess, leaving at least

7.62 cm (3 in.) to spare.

Communication with the Collar

You should keep an unobstructed line of sight between your

handheld device and the dog collar device to produce the best

communication signal. To achieve the best line-of-sight

conditions, you should move to the highest elevation point in

your area (for example, on the top of a hill).

4 Dog Collar Device Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Alpha 200i Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Alpha 200i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info