Bedienungsanleitung Garmin Alpha100 TT 15 (Seite 7 von 26) (Englisch)

657461

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

This method is helpful when you would like to add a dog

collar device during a hunt, but you are not near the dog. For

example, you are adding another member of your hunting

party's dog collar device to your handheld device, but you do

not own the dog collar device (Adding a Dog Using the Track

and Train Codes, page 3).

NOTE: This feature varies based on dog collar device type

and feature availability in your area. You may see track

codes only or track and train codes.

Sharing wirelessly using ANT+

wireless technology: Allows

you to add a dog collar device that you do not own and that is

not in the area. The dog's owner must determine if you can

only track the dog or can track and train the dog. This method

does not require the dog's owner to find and communicate

the codes to the person adding the dog collar device. This

method also adds dog information, such as the dog's name,

communication settings, and initial position, from the sending

handheld device to your device. The two handheld devices

must be within range 3 m (10 ft.) to share data wirelessly.

This method is helpful when you want to add a dog collar

device during a hunt, but you are not near the dog. For

example, the dogs have already been let loose, and you are

near the dog owner, who can share the dog wirelessly

(Sharing a Dog Wirelessly, page 3).

VHF Radio Information

This product may be used only on specific radio frequencies,

which vary depending on the country of use. See the product

packaging or go to www.garmin.com/tracking-legal for details

about the radio frequency of this product.

Adding a Dog Using Wireless Pairing

If the dog collar device is on, turn off the dog collar device

(Turning Off the Devices, page 2).

Hold until the dog collar device emits two series of beeps

(about 2 seconds), and then release .

The status LED flashes rapidly in green. The dog collar

device is now ready to be linked, or paired, with a handheld

device.

On the handheld device, select Dog List > Add Dog.

Bring the dog collar device near the handheld device, and

select Yes.

After successfully adding the dog collar device, enter the

name of the dog, and select > OK.

Adding a Dog Using the Track and Train Codes

NOTE: This feature varies based on dog collar device type and

feature availability in your area.

Before you can add a dog using the track and train codes, the

dog owner must find the track and train codes (Finding the Dog

ID and Track and Train Codes, page 3) and tell them to you.

If you are not near the dog you want to add or you cannot put

the collar into pairing mode, you can add the dog using the track

and train codes.

Select Add Dog.

When asked if you are near the collar, select No.

When asked if you know the track and train codes, select

Yes.

Enter the track or train code for the collar, and select .

The dog’s track code allows you to track the dog. The dog’s

train code allows you to both track and train the dog.

Enter the name of the dog, and select > OK.

Finding the Dog ID and Track and Train Codes

You can share a dog’s track code so another person can view

your dog’s location with the map and dog tracking compass.

Also, you can share a dog’s train code so another person can

track your dog and train (correct) your dog.

Select Dog List.

Select a dog.

Select Show Info.

Sharing a Dog Wirelessly

Before you can share data wirelessly over ANT+, you must bring

your Alpha handheld device within 10 ft. (3 m) of the other

handheld device.

Select Dog List.

Select the dog to share.

Select Share Wirelessly.

Select an option:

• To allow the other person only to track your dog's location

with the map and dog tracking compass, select Track

Only.

• To allow the other person to track your dog and correct

your dog's behavior, select Track and Train.

On the other handheld device, select Dog List > >

Receive Wirelessly.

Editing Dog Information

Resetting a Dog's Statistics and Track

You might want to clear the dog statistics and track before a

new hunt.

Select Dog List.

Select a dog.

Select Show Info > Reset > Yes.

Changing the Length of the Dog's Track

You can adjust the length of the dog's tracks shown on the map.

Showing less tracks on the map can help to declutter the map

view. Changing the length of the track shown on the map does

not affect the tracks stored in the internal memory.

Select Setup > Dogs > Dog Track On Map.

Select an option to show more or less of the tracks on the

map.

Changing the Dog Name

Select Dog List.

Select a dog.

Select Show Info.

Select the dog’s name.

Enter the name, and select > OK.

Changing the Color of the Dog's Track

You can change the track color of the dog. It is helpful to have

the track color match the color of the collar strap, if possible.

Select Dog List.

Select a dog.

Select Show Info.

Select the colored square next to the dog’s name.

Select a color.

Changing the Dog Type

Before you can change the dog type, the collar must be turned

on and within range of the handheld device.

Select Dog List.

Select a dog.

Select Show Info > > Change Dog Type.

Select a dog type.

Dog Collar Device Setup 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Alpha100 TT 15 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info