Bedienungsanleitung Garmin Astro320 - DC50 (Seite 14 von 22) (Englisch)

589669

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Auto Archive: Sets an automatic archive method to organize

your tracks. Tracks are saved and cleared automatically.

Color: Changes the color of the track line on the map.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, and pressure.

1Select Setup > Units.

2Select a measurement type.

3Select a unit of measure for the setting.

Time Settings

Select Setup > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Position Format Settings

NOTE: Do not change the position format or the map datum

coordinate system unless you are using a map or chart that

specifies a different position format.

Select Setup > Position Format.

Position Format: Sets the position format in which a given

location reading appears.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Heading Settings

You can customize the compass settings.

Select Setup > Heading.

Display: Sets the type of directional heading shown on the

compass.

North Reference: Sets the north reference used on the

compass.

Go To Line/Pointer: Sets the behavior of the pointer that

appears on the map. Bearing points in the direction of your

destination. Course shows your relationship to the course

line leading to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: See page 6.

Altimeter Settings

Select Setup > Altimeter.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on.

Barometer Mode: Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should only change

due to weather.

Pressure Trending: Sets how the device records pressure

data. Save Always records all pressure data, which can be

helpful when you are watching for pressure fronts.

Plot Type: Records elevation changes over a period of time or

distance, records barometric pressure over a period of time,

or records ambient pressure changes over a period of time.

Calibrate Altimeter: Calibrates the altimeter.

Geocaching Settings

Select Setup > Geocaches.

Geocache List: Allows you to display the geocache list by

names or codes.

Found Geocaches: Allows you to edit the number of

geocaches found. This number automatically increases as

you log a find.

Filter Setup: Allows you to create and save custom filters for

geocaches based on specific factors (page 8).

chirp Searching: Allows the device to search for a geocache

containing a chirp accessory (page 8).

Program chirp: Programs the chirp accessory. See the chirp

owner's manual at www.garmin.com.

Routing Settings

The device calculates routes optimized for the type of activity

you are doing. The routing settings available vary based on the

activity selected.

Select Setup > Routing.

Guidance Method: Sets the preference for optimizing route

calculation based on distance, time, on-road, or off-road

routing.

Calculate Routes for: Sets the mode of transportation for

which to calculate routes.

Lock On Road: Locks the position icon, which represents your

position on the map, onto the nearest road.

Off Road Transitions: Sets how the device routes from one

point on the route to the next. This setting is available only

for some activities. Distance routes you to the next point on

the route when you are within a specified distance of your

current point.

Avoidance Setup: Sets the road types to avoid while

navigating. This setting is available only for some activities.

Marine Map Settings

Select Setup > Marine.

Marine Chart Mode: Selects a nautical chart or a fishing chart.

Nautical displays various map features in different colors so

the marine POIs are more readable and so the map reflects

the drawing scheme of paper charts. Fishing (requires

marine maps) displays a detailed view of bottom contours

and depth soundings and simplifies map presentation for

optimal use while fishing.

Appearance: Sets the appearance of marine navigation aids on

the map.

Marine Alarm Setup: Sets alarms for when you exceed a

specified drift distance while anchored, when you are off

course by a specified distance, and when you enter water of

a specific depth.

Setting up Marine Alarms

1From the main menu, select Setup > Marine > Marine

Alarm Setup.

2Select an alarm type.

3Select On.

4Enter a distance.

Device Information

Viewing Device Information

You can view the unit ID, software version, and license

agreement.

Select Setup > About.

10 Device Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Astro320 - DC50 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Astro320 - DC50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info