691403

Garmin BarkLimiter 2 Seite 7

7
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
When the mode is set in the app, the center LED indicator turns
blue and the smart mode option becomes available after you
cycle through the standard corrections. You must press the
button to see the current mode. When a correction is issued in
smart mode, the corresponding LED indicates your selected
correction.
You can select a standard or smart mode.
1
Remove the collar band from the device.
2
Press the mode button until the green LED indicates the
current mode.
3
Press the mode button within two seconds to cycle the green
LED through the modes, and select a mode.
NOTE: When the center LED is blue, you can select smart
mode.
After two seconds, the LED turns from green to red, and the
device issues a sample correction of your selected mode.
When you select stimulation mode, the device does not issue
a sample correction.
If the device is in smart mode, the blue LED cycles to a
green, then a red LED on the selected correction mode.
Status LED Indicator
The center status LED indicators flashes when the device
detects a bark or has a low battery charge.
LED Activity State Status
Flashing white A bark was detected, and no
correction was applied.
Flashing red Correction mode A bark was detected, and a
correction was applied.
After a correction The battery is low.
Correction Methods
Stimulation: Applies a brief stimulation. You can manually
adjust the stimulation intensity level using the Garmin Canine
app.
Tone: Activates an audible tone. A tone can provide a patterned
interruption to stop a behavior. The tone can be more
effective when it is already associated with a negative
consequence or alternate behavior.
Vibration: Applies a vibration to the dog for a short period of
time to help break focus on the current cause of a behavior.
The effectiveness of the vibration may vary based on the
dog's temperament and experience.
Automatic Intensity
The device can set the stimulation intensity level automatically
based on the barking behavior of the dog. The device starts at
the lowest intensity level and increases the intensity level
gradually until the dog stops barking. When the dog is quiet, the
intensity decreases over time.
The automatic intensity feature is designed to eliminate
excessive nuisance barking. To stop barks sooner, you should
set the intensity level manually.
The extended panic guard is a safety feature that disables
stimulation after four corrections at the highest level, with 10
seconds between corrections. After the fourth correction, the
device waits until no barks are detected in 2 minutes.
NOTE: When you set a fixed correction level, the device does
not enter extended panic guard, even at the highest level of
correction.
Choosing the Correct Intensity Level
You should choose the lowest intensity level that discourages
the dog from barking. If you have never used a bark correction
collar with the dog, the dog requires time and experience to
learn that the bark is the cause of the correction.
1
From the Garmin Canine app, set the intensity to the lowest
level.
2
For thirty minutes, when the dog barks, observe the dog for a
reaction, such as a head shake, neck movement, a change in
the way the dog barks, or just a change in expression.
3
If there is no reaction, increase the intensity by one level until
the dog has a slight but recognizable reaction to the
stimulation.
4
Allow 24 hours for the dog to learn to respond by not barking.
5
If the dog continues barking while wearing the collar,
increase the intensity level gradually until you find the level
that discourages the dog from barking.
Troubleshooting
The bark detection is too sensitive
If the BarkLimiter feature activates when the dog is not barking,
or if the bark detection appears to be too sensitive, you can try
these tips.
• Use the Garmin Canine app to adjust the amount of barking
allowed before correcting your dog.
• Use the Garmin Canine app to turn off the BarkLimiter
feature during heavy play, when the dog is very active, or
when the dog is eating.
• Remove all other collars, tags, or other items from your dog.
My dog collar device is not responding
If the dog collar device stops responding, you can try these tips.
• Verify the dog collar device is turned on (Turning On the Dog
Collar Device, page 1).
• Enable Bluetooth wireless technology on your smartphone.
• Pair the dog collar device with your smartphone (Pairing Your
Smartphone with the Dog Collar Device, page 1).
• Confirm that you are the only user currently attempting to
train the dog.
NOTE: Only one smartphone can be connected to the dog
collar device at a time.
• Check the battery level of the dog collar device in the Garmin
Canine app.
NOTE: You should sync your dog collar device with the
Garmin Canine app to view updated information and battery
level notifications.
• Hold the power key for 10 seconds to reset the dog collar
device.
My device does not seem to be active
When the device is active, the selected mode LED flashes only
when the device detects a bark, or you press the button.
• Verify the collar is turned on (Turning On the Dog Collar
Device, page 1).
• Verify in the Garmin Canine app that the battery is not low.
• Remove the device from the dog, and press the mode button.
The device flashes the current battery status. If the LED is
red, or the device does not respond, charge the device
(Charging the Dog Collar Device, page 1).
My device is not charging or does not hold a
charge
If the device does not seem to be charging or holding a charge,
you can try these tips.
• Verify the charging connections are secure (Charging the
Dog Collar Device, page 1).
• Verify the AC adapter and outlet are functional.
Troubleshooting 3
… 7 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin BarkLimiter 2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Garmin BarkLimiter 2

Garmin BarkLimiter 2 Bedienungsanleitung - Holländisch - 12 seiten

Garmin BarkLimiter 2 Bedienungsanleitung - Französisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info