Bedienungsanleitung Garmin BC35 (Seite 6 von 8) (Englisch)

699110

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

on the cab and a second backup camera installed on a trailer.

From the camera view, you can cycle through the video feeds

from all paired cameras. You can change the order in which

cameras appear when you switch cameras.

Switching Cameras

When multiple backup cameras are transmitting to your device,

you can switch between the views from the cameras.

Select > Rear View.

Select > Choose Camera.

Select a camera.

The video feed from the camera appears, and the camera

name appears at the top of the screen.

Changing the Camera Order

You can change the order of the cameras in the list. When more

than one camera is transmitting, the order of the cameras

determine which video is shown.

Select > Rear View.

Select > Set Priority.

A list of paired cameras appears.

Drag each camera to the desired location in the list.

Cameras towards the top of the list have priority when more

than one camera is transmitting.

NOTE: You can switch manually to any transmitting camera,

regardless of the position in the list (Switching Cameras,

page 2).

Renaming a Camera

You can change the name that appears above a camera in the

camera view. You should use a descriptive name that clearly

identifies the location of the camera.

From the main menu, select > Rear View.

If you have more than one camera paired, select > Choose

Camera and select the camera to rename.

Select > Settings > Rename.

Removing a Paired Camera

If you have already paired 4 BC 35 cameras with your device,

you must remove a paired camera before you can pair a new

one.

Select > Rear View.

If necessary, select > Choose Camera and select the

camera to remove.

Select > Settings > Unpair.

Select OK.

Wireless and Network Settings

Turning on and Off the Quick Connection

Setting

The BC 35 wireless backup camera uses Wi‑Fi to communicate

with your Garmin navigation device. Turning on the Quick

Connection setting increases the priority of the camera

connection on the device. This helps the device establish a

connection with the paired camera more quickly, but may affect

the connection speed for other Wi‑Fi devices.

From the main menu, select > Rear View.

If you have more than one camera paired, select > Choose

Camera and select the camera to adjust.

Select > Settings.

Select or clear the Quick Connection check box.

Appendix

Specifications

Camera and transmitter input

voltage

From 9 to 28 Vdc

Transmitter fuse 500 mA, fast-blow

Camera and transmitter current

usage

150 mA at 12 Vdc

Water rating (camera) IEC 60529 IPX7*

Water rating (transmitter) Not waterproof

Operating temperature range From -20° to 70°C (from -4° to

158°F)

*The camera withstands incidental exposure to water of up to 1

m for up to 30 min. For more information, go to garmin.com

/waterrating.

2 Wireless and Network Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin BC35 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin BC35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info