Bedienungsanleitung Garmin Camper RV 780 (Seite 22 von 30) (Englisch)

691038

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel

history feature (Device and privacy settings, page 19).

You can view your previous routes and places where you have

stopped on the map.

Select Apps > Where I've Been.

Settings

Map and vehicle settings

Select Settings > Map & Vehicle.

Vehicle: sets the vehicle icon that represents your position on

the map.

Driving Map View: sets the perspective on the map.

Map Detail: sets the level of detail on the map. More detail may

cause the map to be drawn more slowly.

Map Theme: changes the colour of the map data.

Map Layers: sets the data that appears on the map page

(Customising the map layers, page 12).

Auto Zoom: automatically selects the zoom level for optimal use

of your map. When disabled, you must zoom in or out

manually.

myMaps: sets which installed maps the device uses.

Enabling maps

You can enable map products installed on your device.

TIP: to purchase additional map products, go to

http://buy.garmin.com.

Select Settings > Map & Vehicle > myMaps.

Select a map.

Navigation settings

Select Settings > Navigation.

Route Preview: shows a preview of the major roads in your

route when you start navigation.

Calculation Mode: sets the route calculation method.

Avoidances: sets road features to avoid on a route.

Custom Avoidances: allows you to avoid specific roads or

areas.

Toll Roads: sets preferences for avoiding toll roads.

Tolls and Fees: sets preferences for avoiding toll roads and toll

stickers.

NOTE: this feature is not available in all areas.

Environmental Zones: sets the avoidance preferences for

areas with environmental or emissions restrictions that may

apply to your vehicle.

Restricted Mode: disables all functions that require significant

operator attention.

GPS Simulator: stops the device from receiving a GPS signal

and saves battery power.

Calculation Mode Settings

Select Settings > Navigation > Calculation Mode.

The route calculation is based on road speeds and vehicle

acceleration data for a given route.

Faster Time: calculates routes that are faster to drive but can

be longer in distance.

Shorter Distance: calculates routes that are shorter in distance

but can take more time to drive.

Off Road: calculates a direct line from your location to your

destination.

Setting a simulated location

If you are indoors or not receiving satellite signals, you can use

the GPS simulator to plan routes from a simulated location.

Select Settings > Navigation > GPS Simulator.

From the main menu, select View Map.

Tap the map twice to select an area.

The address of the location appears at the bottom of the

screen.

Select the location description.

Select Set Location.

Wireless network settings

The wireless network settings allow you to manage Wi‑Fi

networks, paired Bluetooth devices and Bluetooth features.

Select Settings > Wireless Networks.

Bluetooth: enables Bluetooth wireless technology.

Paired Device Name: the names of paired Bluetooth devices

appear in the menu. You can select a device name to change

Bluetooth feature settings for that device.

Search for Devices: searches for nearby Bluetooth devices.

Friendly Name: allows you to enter a friendly name that

identifies your device on other devices with Bluetooth

wireless technology.

Wi-Fi: enables the Wi‑Fi radio.

Saved Networks: allows you to edit or remove saved networks.

Search for Networks: searches for nearby Wi‑Fi networks

(Connecting to a Wi

‑

Fi Network, page 20).

Driver Assistance Settings

Select Settings > Driver Assistance.

Driver Alerts: allows you to enable or disable alerts for

upcoming zones or road conditions (Driver awareness

features and alerts, page 3).

Speeding Alert: alerts you when you are exceeding the speed

limit.

Break Planning: reminds you to take a break and shows

upcoming services after you drive for an extended time. You

can enable or disable break reminders and upcoming service

suggestions.

Proximity Alerts: alerts you when you approach speed

cameras or red light cameras.

Proximity alerts settings

NOTE: you must have custom points of interest (POIs) loaded

for proximity points alerts to display.

NOTE: this feature is not available in all areas.

Select Settings > Driver Assistance > Proximity Alerts.

Audio: sets the style of alert that plays when you approach

proximity points.

Alerts: sets the type of proximity points for which alerts are

played.

Display settings

Select Settings > Display.

Colour Mode: allows you to select day or night colour mode. If

you select the Auto option, the device automatically switches

to day or night colours based on the time of day.

Brightness: allows you to adjust the display brightness.

Display Timeout: allows you to set the amount of idle time

before your device enters sleep mode while using battery

power.

18 Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Camper RV 780 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Camper RV 780

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info