Bedienungsanleitung Garmin Chirp (Seite 1 von 2) (Englisch)

589667

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite









See the Important Safety and Product Information guide in the GPS device

product box for product warnings and other important information.

Do not use a sharp object to remove user replaceable batteries. Contact your

local waste disposal department to properly recycle the batteries.

➊

➋

1. Locate the circular battery cover

➊

on the back of the chirp™.

2. Twist the cover counter-clockwise until it is loose enough to remove.

3. Remove the cover and the battery.

4. Place the new battery into the cover with the positive side facing the

inside of the cover.

5. Replace cover by aligning the dots

➋

and rotating clockwise.



TIP: If you are programming multiple chirp accessories, install only one

battery at a time.



There are several ways to program your chirp. You must have a compatible

Garmin device in order to program the chirp.

1. From the geocaching settings on your Garmin device, enable chirp™

Searching.

2. From your Garmin device, select Program chirp™.

3. Select an option:

• Select Show chirp™ Details to view and edit chirp information.

• Select Send Waypoint to select a saved waypoint from your

compatible device.

• Select Send Geocache to select a saved geocache from your

compatible device.

• Select Erase to erase chirp data.



As the owner of the chirp, your device automatically creates a PIN-entry

to program the chirp securely. This prevents non-owners (nders) from

reprogramming your chirp. The PIN is the last ve digits of the unit ID from

the last Garmin device you used to program the chirp. To nd your unit ID,

refer to the owner’s manual for your Garmin device.

1. From the geocaching settings on your compatible Garmin device, enable

chirp™ Searching.

2. From your compatible Garmin device, select Program chirp™.

3. Enter the PIN.



1. From the geocaching settings on your compatible Garmin device, enable

chirp™ Searching.

2. From your compatible Garmin device, select Program chirp™.

3. Select Show chirp™ Details > Edit.

4. Select Change Name, Change Message, or Change Coordinates.



1. From the geocaching settings on your Garmin device, enable chirp™

Searching.

2. From your Garmin device, select Program chirp™.

3. Select Erase > Yes.



Use the adhesive mount when attaching the chirp to a container.

1. Attach one side of the adhesive mount to the center of the battery door.

2. Attach the other side of the adhesive mount to the top of the container.



• Do not mount the chirp inside a metal container.

• Do not bury the chirp.

• Do not put the chirp in water.

• A compatible Garmin device should detect the chirp within (32.9 ft)

10 m. For maximum transmission range, allow the chirp to have an

unobstructed view in all directions.

chirp Owner’s Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Chirp Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Chirp

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info