Bedienungsanleitung Garmin D2 Charlie (Seite 30 von 46) (Englisch)

674103

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

VIRB widget to be shown in the widget loop (Customizing the

Widget Loop, page 23).

Turn on your VIRB camera.

On your D2 device, select UP or DOWN from the watch face

to view the VIRB widget.

Wait while the device connects to your VIRB camera.

When the camera is connected, a VIRB data screen is

automatically added to the activity apps.

During an activity, select UP or DOWN to view the VIRB data

screen.

Hold UP.

Select VIRB Remote.

Select an option:

• To control the camera using the activity timer, select

Settings > Timer Start/Stop.

NOTE: Video recording automatically starts and stops

when you start and stop an activity.

• To control the camera using the menu options, select

Settings > Manual.

• To manually record video, select Start Recording.

The video counter appears on the D2 screen.

• To take a photo while recording video, select DOWN.

• To manually stop recording video, select .

• To take a photo, select Take Photo.

Activities and App Settings

These settings allow you to customize each preloaded activity

app based on your needs. For example, you can customize data

pages and enable alerts and training features. Not all settings

are available for all activity types.

Hold UP, select Settings > Activities & Apps, select an

activity, and select the activity settings.

Data Screens: Enables you to customize data screens and add

new data screens for the activity (Customizing the Data

Screens, page 24).

Transitions: Enables transitions for multisport activities.

Lock Keys: Locks the keys during multisport activities to

prevent accidental key presses.

Repeat: Enables the repeat option for multisport activities. For

example, you can use this option for activities that include

multiple transitions, such as a swimrun.

Alerts: Sets the training or navigation alerts for the activity.

Metronome: Plays tones at a steady rhythm to help you

improve your performance by training at a faster, slower, or

more consistent cadence (Using the Metronome, page 5).

Map: Sets the display preferences for the map data screen for

the activity (Activity Map Settings, page 25).

Routing: Sets the preferences for calculating routes for the

activity (Routing Settings, page 25).

Auto Lap: Sets the options for the Auto Lap

feature (Auto Lap,

page 25).

Auto Pause: Sets the device to stop recording data when you

stop moving or when you drop below a specified speed

(Enabling Auto Pause

, page 26).

Auto Climb: Enables the device to detect elevation changes

automatically using the built-in altimeter.

Auto Run: Enables the device to detect ski runs automatically

using the built-in accelerometer.

3D Speed: Calculates your speed using your elevation change

and your horizontal movement over ground (3D Speed and

Distance, page 26).

3D Distance: Calculates your distance traveled using your

elevation change and your horizontal movement over ground.

Auto Fly: In watch mode, allows a flight activity to begin

automatically when the detected climb rate exceeds a

specified speed. The activity stops when the ground speed

drops below 30 kn for a specified time.

Flight Timer: From the FLY app, allows the flight timer to start

and stop automatically when your ground speed exceeds

30 kn.

Altimeter: Displays the pressure altitude, or GPS altitude, when

the device has a GPS fix.

Lap Key: Enables you to record a lap or a rest during the

activity.

Auto Scroll: Enables you to move through all of the activity data

screens automatically while the timer is running (Using Auto

Scroll, page 26).

Segment Alerts: Enables prompts that alert you to approaching

segments.

GPS: Sets the mode for the GPS antenna. Using GPS +

GLONASS provides increased performance in challenging

environments and faster position acquisition. Using the GPS

+ GLONASS option can reduce battery life more than using

the GPS option only. Using the UltraTrac option records track

points and sensor data less frequently (UltraTrac, page 26).

Pool Size: Sets the pool length for pool swimming.

Countdown Start: Enables a countdown timer for pool

swimming intervals.

Stroke Detect.: Enables stroke detection for pool swimming.

Power Save Timeout: Sets the power-save timeout setting for

the activity (Power Save Timeout Settings, page 26).

Background Color: Sets the background color of each activity

to black or white.

Accent Color: Sets the accent color of each activity to help

identify which activity is active.

Rename: Sets the activity name.

Restore Defaults: Allows you to reset the activity settings.

Customizing the Data Screens

You can show, hide, and change the layout and content of data

screens for each activity.

Hold UP.

Select Settings > Activities & Apps.

Select the activity to customize.

Select the activity settings.

Select Data Screens.

Select a data screen to customize.

Select an option:

• Select Layout to adjust the number of data fields on the

data screen.

• Select a field to change the data that appears in the field.

• Select Reorder to change the location of the data screen

in the loop.

• Select Remove to remove the data screen from the loop.

If necessary, select Add New to add a data screen to the

loop.

You can add a custom data screen, or select one of the

predefined data screens.

Adding a Map to an Activity

You can add the map to the data screens loop for an activity.

Hold UP.

Select Settings > Activities & Apps.

Select the activity to customize.

24 Customizing Your Device

Garmin D2 Charlie Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Charlie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info