Bedienungsanleitung Garmin D2 Delta (Seite 19 von 52) (Englisch)

674100

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

NOTE: The optical sensor is located on the back of the

device.

• See Tips for Erratic Heart Rate Data, page 13 for more

information about wrist-based heart rate.

• See Tips for Erratic Pulse Oximeter Data, page 19 for more

information about the pulse oximeter sensor.

• For more information about accuracy, go to garmin.com

/ataccuracy.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try

these tips.

• Clean and dry your arm before putting on the device.

• Avoid wearing sunscreen, lotion, and insect repellent under

the device.

• Avoid scratching the heart rate sensor on the back of the

device.

• Wear the device above your wrist bone. The device should

be snug but comfortable.

• Wait until the icon is solid before starting your activity.

• Warm up for 5 to 10 minutes and get a heart rate reading

before starting your activity.

NOTE: In cold environments, warm up indoors.

• Rinse the device with fresh water after each workout.

• While exercising, use a silicone band.

Viewing the Heart Rate Widget

The widget displays your current heart rate in beats per minute

(bpm) and a graph of your heart rate for the last 4 hours.

From the watch face, select DOWN.

Select to view your average resting heart rate values for

the last 7 days.

Broadcasting Heart Rate Data to Garmin Devices

You can broadcast your heart rate data from your D2 Delta/

Delta S/Delta PX device and view it on paired Garmin devices.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Options > Broadcast Heart Rate.

The D2 Delta/Delta S/Delta PX device starts broadcasting

your heart rate data, and appears.

NOTE: You can view only the heart rate widget while

broadcasting heart rate data from the heart rate widget.

Pair your D2 Delta/Delta S/Delta PX device with your Garmin

ANT+ compatible device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, select any

key, and select Yes.

Broadcasting Heart Rate Data During an Activity

You can set up your D2 Delta/Delta S/Delta PX device to

broadcast your heart rate data automatically when you begin an

activity. For example, you can broadcast your heart rate data to

an Edge

device while cycling, or to a VIRB

action camera

during an activity.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Options > Broadcast During Activity.

Begin an activity (Starting an Activity, page 4).

The D2 Delta/Delta S/Delta PX device starts broadcasting

your heart rate data in the background.

NOTE: There is no indication that the device is broadcasting

your heart rate data during an activity.

If necessary, pair your D2 Delta/Delta S/Delta PX device with

your Garmin ANT+ compatible device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, stop the

activity (Stopping an Activity, page 4).

Turning Off the Wrist-based Heart Rate Monitor

The default value for the Wrist Heart Rate setting is Auto. The

device automatically uses the wrist-based heart rate monitor

unless you pair an ANT+ heart rate monitor to the device.

NOTE: Disabling the wrist-based heart rate monitor also

disables the on-wrist detection feature for Garmin Pay

payments, and you must enter a passcode before making each

payment (Garmin Pay, page 10).

NOTE: Disabling the wrist-based heart rate monitor also

disables the wrist-based pulse oximeter sensor.

From the heart rate widget, hold MENU.

Select Options > Status > Off.

Putting On the Heart Rate Monitor

You should wear the heart rate monitor directly on your skin, just

below your sternum. It should be snug enough to stay in place

during your activity.

If necessary, attach the strap extender to the heart rate

monitor.

Wet the electrodes

on the back of the heart rate monitor to

create a strong connection between your chest and the

transmitter.

Wear the heart rate monitor with the Garmin logo facing right-

side up.

The loop

and hook

connection should be on your right

side.

Wrap the heart rate monitor around your chest, and connect

the strap hook to the loop.

NOTE: Make sure the care tag does not fold over.

After you put on the heart rate monitor, it is active and sending

data.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try

these tips.

Heart Rate Features 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Delta Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Delta

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info