Bedienungsanleitung Garmin D2 Pilot (Seite 1 von 4) (Englisch)

563575

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

D2™ Pilot Watch Quick Start Manual

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Getting Started

When using your device the first time, you should complete

these tasks to set up the device and get to know the basic

features.

Charge the device (Charging the Device).

Learn about the sensor data and modes (Viewing the Data

Pages).

Acquire satellites and record a track (Acquiring Satellite

Signals and Recording a Track).

Create a waypoint (Creating a Waypoint).

Get the owner's manual (Getting the Owner's Manual).

Charging the Device

NOTICE

To prevent corrosion, thoroughly dry the contacts and the

surrounding area before charging or connecting to a computer.

The device is powered by a built-in lithium-ion battery that you

can charge using a standard wall outlet or a USB port on your

computer.

Plug the USB end of the cable into the AC adapter or a

computer USB port.

Plug the AC adapter into a standard wall outlet.

Align the left side of the charging cradle

with the groove on

the left side of the device.

Align the hinged side of the charger

with the contacts on

the back of the device.

When you connect the device to a power source, the device

turns on.

Charge the device completely.

Keys

Select to turn the backlight on and off. Hold to turn the

device on and off.

Select to scroll through the data pages, options, and

settings. Hold to navigate to an airport by airport code

(Navigating to an Airport by Identifier).

Select to scroll through the data pages, options, and

settings. Hold to navigate to the nearest airport

(Navigating to the Nearest Airport).

Select to return to the previous screen. Hold to view the

status page.

Action key Select to open the menu for the current screen. Select

to choose an option and to acknowledge a message.

Hold to mark a waypoint.

Viewing the Status Page

You can quickly switch to this page to view the time of day,

battery life, and GPS status information from any other page.

Hold .

Viewing the Data Pages

Customizable data pages allow you to quickly access real-time

data from internal and connected sensors. When you begin

tracking or navigating, additional data pages appear.

From the time of day page, select or to cycle through

the data pages.

Data Pages

The data pages available on your device vary based on the

device mode. In low power mode, GPS is disabled, and the

device does not record data. In tracking mode, GPS is enabled

and sensor data is recorded to the track log, but you are not

navigating to a destination. In navigation mode, you are

navigating to a destination.

NOTE: Your body temperature affects the temperature and

density altitude. To get the most accurate temperature reading,

remove the device from your wrist and wait 20–30 minutes.

March 2014

190-01674-01_0B Printed in Taiwan

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Pilot Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Pilot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info