Bedienungsanleitung Garmin Dash Cam 56 (Seite 6 von 14) (Englisch)

691042

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Route the power cable to your vehicle power outlet.

You can use either of the included cables to provide power to

the camera. The longer, lightweight power cable is designed

to be routed out of sight. To hide the 4 m (13 ft.) cable, route

it behind the vehicle trim along the windshield, doorframe, or

dash.

Plug the Garmin Dash Cam power cable into the included

power adapter.

Plug the power adapter into a power outlet in your vehicle.

If necessary, turn on the vehicle ignition switch to provide

power to the power outlet in your vehicle.

The device turns on.

Setting the Camera Placement

You can mount the device in the left, center, or right of your

windshield. For the best performance, you should set the

Camera Placement option to indicate the location of your device

in the vehicle.

Select Settings > Driver Assistance > Camera Placement.

Select Horizontal Placement, and select the horizontal

placement of your camera.

Select Vehicle Height.

Select an option:

• If you are driving a large vehicle, like a full size van or

truck, select Tall.

• If you are driving a car, select Normal.

Turning On the Device Manually

Before you turn on the device using battery power, you should

fully charge the battery.

NOTE: When the device is connected to an ignition-switched

power outlet, it turns on automatically when you turn on the

vehicle.

Select .

The device turns on.

Turning Off the Device Manually

NOTE: When the device is connected to an ignition-switched

power outlet, it turns off automatically when you turn off the

vehicle.

Hold for 3 seconds.

The device turns off.

Main Menu

From the viewfinder, press or to scroll through the main

menu, and press to open a menu item.

Gallery: Allows you to view and manage recorded video and

photos (Viewing Videos and Pictures, page 3).

Travelapse: Allows you to start and stop Travelapse

™

recording

(Travelapse, page 3).

Voice Control: Allows you to enable and disable the voice

control features (Voice Control, page 5).

Garmin Drive App: Allows you to pair your camera with your

smartphone and the Garmin Drive

™

app (Pairing with Your

Smartphone, page 5).

Settings: Allows you to set up camera features, change system

settings, and view system information (Settings, page 6).

Dash Cam Recording

NOTICE

Some jurisdictions regulate or prohibit use of this device. It is

your responsibility to know and comply with applicable laws and

rights to privacy in jurisdictions where you plan to use this

device.

The dash cam records video to the camera memory card

(Installing a Memory Card, page 1). By default, the device

immediately starts recording video when it turns on, and it

continues recording until it is turned off. If the memory card is

full, the device automatically deletes the oldest unsaved video to

create space for new video.

When the option to promptly delete unsaved video is enabled,

the device continually deletes unsaved video more than three

minutes old and deletes all unsaved video each time it is

powered off. This feature is available only for specific regions

and is enabled by default for some of those regions. When the

camera is set to a supported region, you can enable or disable

this feature in the camera settings (Camera Settings, page 6).

You can save a video recording to prevent it from being

overwritten or deleted (Saving Unsaved Video Footage,

page 3).

Saving a Video Recording

By default, the device uses a sensor to detect a possible

incident and automatically saves video footage before, during,

and after the detected event. You can also save video files

manually at any time.

Hold .

The device saves the video footage before, during, and after

you hold .

The memory card has limited storage. After you save a video

recording, you should transfer the recording to your computer

(Videos and Photos on Your Computer, page 3) or to your

smartphone (Trimming and Exporting a Video, page 5).

Event Detection

By default, the device uses a sensor to detect possible incidents

and saves video footage automatically before, during, and after

the detected event. The video footage is stamped with the time,

date, and location of the event.

2 Dash Cam Recording

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Dash Cam 56 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Dash Cam 56

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info