Bedienungsanleitung Garmin Dash Cam 56 (Seite 10 von 14) (Englisch)

691042

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

combines video recorded at the same time into one multi-

camera video icon.

Select and to choose the camera footage to use for the

fullscreen portion of the video.

Drag the handles on the video progress bar to the left or right

to trim the video length.

Select Continue.

Select and to choose the camera footage to use for the

picture-in-picture portion of the video.

Select the corner of the screen where you want the picture-

in-picture footage to appear, and select Export.

NOTE: You must keep the app in the foreground when

exporting a video.

The app exports the picture-in-picture video to your

smartphone.

Camera Settings in the Garmin Drive App

From the Garmin Drive app, select , and select the camera

name.

Camera Setup: Provides options to choose a camera name and

displays a live video feed so you can adjust the position of

the camera.

Quality: Adjusts the video resolution.

Data Overlay: Adjusts the type of data displayed on videos and

pictures.

Unsaved Videos: This feature is not available in all areas.

Determines when the device deletes unsaved video footage.

When the Delete When Full option is selected, the device

deletes the oldest unsaved video when the memory card

storage is full. When the Promptly Delete option is selected,

the device continually deletes unsaved video more than three

minutes old and deletes all unsaved video each time it is

powered off. This is useful to help protect data privacy. While

the Promptly Delete option is selected, you cannot record

Travelapse videos.

Travelapse: Enables or disables the Travelapse feature

(Travelapse, page 3).

Units and Time: Adjusts settings for the date and time format.

About Device: Lists the camera software version and unit ID.

Format SD Card: Formats the memory card and deletes all

videos, photos, and data on the card.

Restore Defaults: Restores the device to factory default

settings and unpairs the device from the Garmin Drive app.

Forget Device: Unpairs the device from the Garmin Drive app.

Renaming a Camera

You can change the name of your camera to help differentiate it

from other cameras in a multiple camera network.

Select .

Select a camera.

Select Camera Setup.

Select a camera name from the Camera Name field.

TIP: You can select Custom to enter a custom camera name.

Settings

Camera Settings

Select > Settings > Camera.

Resolution: Adjusts the video resolution.

Event Detection: Turns on and off event detection (Event

Detection, page 2).

Record Audio: Turns on and off audio recording (Turning Audio

Recording On or Off, page 3).

Data Overlay: Adjusts the type of data displayed on videos and

pictures.

Unsaved Videos: This feature is not available in all areas.

Determines when the device deletes unsaved video footage.

When the Delete When Full option is selected, the device

deletes the oldest unsaved video when the memory card

storage is full. When the Promptly Delete option is selected,

the device continually deletes unsaved video more than three

minutes old and deletes all unsaved video each time it is

powered off. This is useful to help protect data privacy. While

the Promptly Delete option is selected, you cannot record

Travelapse videos or view unsaved video in the gallery.

Record After Power Loss: Sets the amount of time that the

device continues to record video after power is turned off.

Record While Parked: Allows the camera to record video while

the vehicle is parked and turned off, and sets the amount of

time the camera remains active while parked. This feature is

only available when the Dash Cam parking mode cable

accessory is connected to the camera (Recording Videos

While Parked, page 7).

NOTICE

Due to privacy regulations, this feature is not available in all

areas. It is your responsibility to know and comply with

applicable laws and rights to privacy in your jurisdiction.

Format Card: Formats the memory card and deletes all videos,

photos, and data on the card.

Video Resolution Settings

You can set the resolution, frames per second (FPS), and high

dynamic range (HDR) option of video recorded by the camera.

Resolution is the width and height of the video in pixels. FPS is

the number of video frames captured each second. HDR

combines multiple exposure levels for each video frame and can

improve clarity in high contrast or low-light conditions. Settings

with a higher resolution or FPS require more memory card

space.

Not all settings are supported for all product models.

Select Settings > Camera > Resolution.

Setting Resolution Supported Models

1440p, 30fps, HDR 2560 × 1400 px 56/66W

1080p, 60fps 1920 × 1080 px 56/66W

1080p, 30fps, HDR 1920 × 1080 px 56/66W

1080p, 30fps 1920 × 1080 px 46

720p, 30fps, HDR 1280 × 720 px 56/66W

720p, 30fps 1280 × 720 px 46

Driver Assistance Settings

Select > Settings > Driver Assistance.

Camera Placement: Allows you to indicate the placement of

your device in the vehicle (Setting the Camera Placement,

page 2).

Forward Collision: Adjusts the sensitivity of the FCWS feature.

Go Alert: Turns on or off the go alert display and audible alerts

when traffic starts moving (Go Alert, page 4).

Lane Departure: Adjusts the lane boundary settings (Lane

Departure Warning System, page 4).

Proximity Alerts: Adjusts the audible proximity alerts.

System Settings

Select > Settings > System.

Volume: Adjusts the volume of the camera alerts and video

playback.

6 Settings

Garmin Dash Cam 56 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Dash Cam 56

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info