Bedienungsanleitung Garmin Delta InBounds system (Seite 5 von 16) (Englisch)

691406

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Getting Started

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

WARNING

The dog collar device and wireless containment system are not

recommended for use with aggressive dogs. Do not use this

product if your dog is prone to aggressive behavior. The device

is not designed or intended to restrain aggressive dogs. The dog

collar device and wireless containment system should be used

at the dog owner's discretion. Consult your veterinarian or a

certified dog trainer to determine if this product is right for your

dog.

Setting Up the Delta Inbounds System

Complete these tasks to set up the Delta Inbounds system.

Charge the dog collar device (Charging the Dog Collar

Device, page 1).

Install backup batteries in the base unit (Installing Backup

Batteries, page 1).

Select a mounting location, and install the base unit

(Installing the Base Unit, page 2).

Set up a boundary (Setting up a Boundary, page 2).

Train your dog to use the wireless containment system

(Training Your Dog to Use the Boundary, page 4).

Device Overviews

Base Unit

Keypad

Battery cover D-ring

Power port

Mini-USB port (under battery door)

Keypad

OK Select to choose menu options.

Select to return to the previous screen.

Select to scroll through menus, options, and screens.

Dog Collar Device

Power key

Status LED

Contact points

Charging clip contacts

Collar band

Charging the Dog Collar Device

NOTICE

To prevent corrosion, thoroughly dry the contacts on the dog

collar device and the surrounding area before connecting the

charging clip.

You should fully charge the battery before you use the device for

the first time. Charging a fully depleted battery takes about three

hours.

Snap the device

onto the charging clip

Plug the power cable into a power source.

The status LED is solid red when the device is charging.

After the status LED turns solid green, remove the charging

clip from the device.

Turning On the Dog Collar Device

Hold the power key until the status LED turns green and the

device beeps.

Turning Off the Dog Collar Device

Hold the power key until the status LED turns solid red and

the device beeps.

Installing Backup Batteries

The base unit uses three AA batteries (not included). You

should install backup batteries in the base unit to maintain an

active boundary during a power outage.

Turn the D-ring counter-clockwise, and pull up to remove the

cover.

Insert three AA alkaline batteries, observing polarity.

Replace the battery cover, and turn the D-ring clockwise.

Mounting Location Considerations

• The base unit should be approximately 1.5 m (5 ft.) above the

ground when mounted.

• The base unit should be near a power source.

Getting Started 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Delta InBounds system Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info