Bedienungsanleitung Garmin Delta XC series (Seite 6 von 14) (Englisch)

657468

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

The LCD display on the handheld device shows the current

battery charge level. Charging is complete when the battery

charge level icon stops flashing.

Charging the Dog Collar Device

NOTICE

To prevent corrosion, thoroughly dry the contacts on the collar

and the surrounding area before connecting the charging clip.

Before you put the collar on the dog, remove the charging clip. If

you do not remove the clip, it may become detached from the

collar and become lost.

You should fully charge the battery before you use the device for

the first time. Charging a fully depleted battery takes about two

hours. The device does not charge when outside the

temperature range of 0° to 40°C (32° to 104°F).

Snap the charging clip

onto the device.

Plug the small end of the power cable into the mini-USB port

on the charging clip.

Plug the other end of the power cable into a power source.

The status LED is solid red when the collar is charging.

After the status LED turns solid green, remove the charging

clip from the collar.

NOTE: The dog collar device returns to factory default settings

each time it is charged or turned off.

Turning On the Devices

• On the handheld device, hold the power key until the

LCD display turns on.

• On the dog collar device, hold the power key until the status

LED flashes and the collar beeps.

Turning Off the Devices

• On the handheld device, hold the power key until the

LCD display turns off.

• On the dog collar device, hold the power key until the status

LED flashes and the collar beeps.

Dog Collar Devices

You can use up to three dog collar devices with a single

handheld device. You can select a different training mode and

intensity level for each dog collar device.

Each dog collar device must be paired with the handheld device

before it can be used. During the pairing process, each dog

collar device is associated with a color on the handheld device.

indicates the selected color.

Pairing a Dog Collar Device with the Handheld Device

NOTE: If your handheld device and dog collar device were

included in the same package, the devices are paired from the

factory using the black color selection.

Turn on the dog collar device and the handheld device.

On the handheld device, select to choose a color.

indicates the selected color.

On the handheld device, select an intensity level greater than

0 (Changing the Intensity Level).

On the dog collar device, hold the power key.

You must continue to hold the power key during the pairing

process.

The device beeps once when you select the power key and

again after five seconds.

After the second beep, select a training key on the handheld

device.

The dog collar device turns off and beeps to indicate whether

the devices paired successfully.

Short beep Devices paired successfully

Long beep Devices did not pair

TIP: If the devices did not pair successfully, you should verify

the batteries in both devices are fully charged and the intensity

level is set higher than 0.

Selecting a Dog Collar Device

Before you can select and control a dog collar device, you must

pair the dog collar device with the handheld device (Pairing a

Dog Collar Device with the Handheld Device).

Select to choose the color.

indicates the selected color.

The training keys control the dog collar device associated with

the selected color.

Managing Multiple Dog Collar Devices

You can set the maximum number of active dog collar devices

controlled by your handheld device.

Hold .

indicates active devices.

Release to select the active dog collar devices.

Dog Training

You should research and investigate the training methods best

suited for you, your dog, and your needs. This manual provides

some basic guidelines for training, but each dog has unique

training needs.

When used properly, the Delta XC training system is a very

effective training tool to aid your dog in reaching its full potential.

The use of the training system should be part of an overall

training program.

Begin training your dog on a leash, without the Delta XC training

system. You should train your dog how to heel, sit, and come to

you. After the dog understands these three basic commands,

you can begin training with the dog collar device and the leash.

Finally, when the dog consistently obeys commands using the

leash and collar, you may be able to remove the leash to train

with only the dog collar device.

Selecting and Installing the Contact Points

For best results, select the correct contact points based on your

dog's coat.

Select the correct contact point length for your dog's coat

type:

• For dogs with thicker coats, use the longer contact points.

• For dogs with shorter coats, use the shorter contact

points.

If necessary, use the included wrench to remove the contact

points.

2 Dog Training

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Delta XC series Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Delta XC series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info