Bedienungsanleitung Garmin Delta XC series (Seite 9 von 14) (Englisch)

657468

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

behavior. This occurs when the dog obeys commands while

wearing the dog collar device, but does not obey commands

when the device is removed. You should follow these tips to

prevent this behavior.

• Begin training the dog without using the Delta XC training

system to correct the dog (Basic Training Commands).

• Turn off the dog collar device and put it on the dog during

initial training.

This allows the dog to get used to the device before you start

using it to correct the dog.

• Turn off the dog collar device and put it on the dog outside of

your training sessions.

This allows the dog to get used to the device and helps to

prevent the dog from associating the presence of the device

with training or obedience.

• Reward the dog with praise whenever the dog obeys a

command.

Training the Dog to Heel and Sit with the Collar

Before you begin training your dog using the collar, your dog

must show a grasp of the "heel," "sit," and "come" commands

while on the leash, you must put on the collar (Fitting the Collar

on Your Dog), and you must find the correct intensity level

(Choosing the Correct Intensity Level).

When beginning collar training, start with the "heel" and "sit"

commands.

With the dog at your side on a leash, pull up on the leash,

and command the dog to "sit."

If the dog does not sit immediately, press a training key

briefly, and repeat the command to "sit."

Reward the dog with praise when the dog obeys the

command.

After the dog begins obeying the "sit" command without collar

stimulation, you should move on to the "heel" command.

With the dog at your side on a leash and with the collar on,

command “heel” and begin walking forward while gently

pulling on the leash.

If the dog not heel, press a training key briefly, repeat the

command to “heel”, and move in another direction or pull

back on the leash.

Reward the dog with praise when the dog obeys the

command.

Training the Dog to Come Here with the Collar

Before you begin training your dog to come "here" using the

collar, your dog must have a strong grasp of the "heel" and "sit"

commands using the collar, you must put on the collar (Fitting

the Collar on Your Dog), and you must find the correct intensity

level (Choosing the Correct Intensity Level). Also, you may need

to use a long leash to effectively train "here."

With the dog in a sitting position, move away to the end of the

leash.

Command the dog to come “here.”

If the dog does not move immediately toward you, press a

training key briefly, gently tug on the leash, and repeat the

command to come "here."

Reward the dog with praise as soon as the dog begins to

move toward you.

If the dog begins to veer away, press a training key briefly,

and repeat the command to come "here."

BarkLimiter Mode

When you enable BarkLimiter mode, the handheld device

automatically activates a stimulation when the dog collar device

detects a bark.

Enabling BarkLimiter Mode

When BarkLimiter mode is enabled, the device corrects the

dog's barks automatically.

Select .

appears on the LCD display and the status LED on the dog

collar device flashes three times when the device enters

BarkLimiter mode.

TIP: Occasionally, the dog collar device may not enter

BarkLimiter mode if there is signal interference or if it is outside

the range of the handheld device. With selected on the

LCD display, you can select any training key to force the device

to enter BarkLimiter mode.

Changing the BarkLimiter Intensity Level

You can change the BarkLimiter intensity level based on your

training style and preferences.

When BarkLimiter mode is enabled, select or to

change the intensity level:

• Select U to set the stimulation for vibration only.

• Select A to enable Autorise. The system starts at the

lowest intensity level and increases the intensity level

automatically based on the dog's barking behavior. It may

take up to one minute for the system to increase to an

intensity level that discourages the dog from barking.

• Select 1 through 18 to set a specific intensity level.

Training with BarkLimiter

You can train your dog while BarkLimiter mode is turned on.

When BarkLimiter mode is active, select .

and a three-letter training mode appear on the LCD

display.

Select a training mode (Selecting a Training Mode).

Select an intensity level (Changing the Intensity Level).

NOTE: When training mode is active, adjustments to the

intensity level apply only to the training keys. You can adjust the

BarkLimiter intensity level only when BarkLimiter mode is

activated and training mode is not active.

Device Information

Delta XC Handheld Device Specifications

Battery type Rechargeable, replaceable lithium-ion

Battery life 60 hr., typical use

Operating temperature range From -20° to 60°C (from -4° to 140°F)

Charging temperature range From 0° to 40°C (from 32° to 104°F)

Storage temperature range (up

to 1 mo.)

From -20° to 50°C (from -4° to 122°F)

Storage temperature range (up

to 3 mo.)

From -20° to 40°C (from -4° to 104°F)

Storage temperature range (up

to 1 yr.)

From -20° to 20°C (from -4° to 68°F)

Water rating IEC 60529 IPX7*

Wireless range (Delta Upland

XC)

1.2 km (0.75 mi.)

Wireless range (Delta Sport XC) 1.2 km (0.75 mi.)

Wireless range (Delta XC) 0.8 km (0.5 mi.)

*The device withstands incidental exposure to water of up to 1 m

for up to 30 min. For more information, go to www.garmin.com

/waterrating.

Delta XC Dog Collar Device Specifications

Battery type Rechargeable, replaceable lithium-ion

Battery life 60 hr., typical use

Device Information 5

Garmin Delta XC series Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Delta XC series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info