Bedienungsanleitung Garmin Descent G1 (Seite 14 von 134) (Englisch)

801440

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

Dive Setup

You can customize the dive settings based on your needs. Not all settings are applicable for all dive modes. You

can also edit the settings before you start a dive.

Hold MENU, and select Dive Setup.

Gases: Sets the gas blends used in the gas dive modes (Setting Up Your Breathing Gases, page7). You can

have up to twelve gases for each gas dive mode.

Conservatism: Sets the level of conservatism for decompression calculations. Higher conservatism provides a

shorter bottom time and a longer ascent time. The Custom option allows you to set a custom gradient factor.

NOTE: Make sure you understand gradient factors before entering a custom level of conservatism.

Water Type: Allows you to select the water type.

PO2: Sets the partial pressure of oxygen (PO2) thresholds, in bar, for the maximum operating depth (MOD),

decompression, warnings, and critical alerts (Setting PO2 Thresholds, page8).

Scuba Alerts: Allows you to set custom alerts for gas dives (Custom Dive Alerts, page7).

Apnea Alerts: Allows you to set custom alerts for apnea dives (Custom Dive Alerts, page7).

Safety Stop: Allows you to change the safety stop duration.

Last Deco Stop: Allows you to set the depth of the final decompression stop.

End Dive Delay: Allows you to set the length of time before the device ends and saves a dive after surfacing.

CCR Setpoints: Allows you to set high and low PO2 setpoints for closed-circuit rebreather (CCR) dives (Setting

CCR Setpoints, page9).

Backlight: Allows you to adjust the backlight settings for dive activities. You can enable the backlight

throughout the dive or only when you are at depth.

Heart Rate: Allows you to enable or disable a heart rate monitor for dives. The Stored Strap Data option allows

you to enable a chest heart rate monitor, such as the HRM-Swim™ or HRM-Tri™ device, that stores heart rate

data with the dive. You can view chest heart rate monitor data in the Garmin Dive™ app after you complete the

dive.

Double Tap to Scroll: Allows you to double tap the device to scroll through the dive data screens. If you notice

accidental scrolling, you can use the Sensitivity option to adjust the responsiveness.

UP Key: Allows you to enable or disable the UP button during dive activities to prevent inadvertent button

presses.

Silent Diving: Allows you to disable all tones and vibrations for alerts during dive activities.

No-Fly Time: Allows you to set the no-fly countdown timer mode (No-Fly Time, page9).

Deco Lockout: Allows you to disable the decompression lockout feature. This feature prevents single-gas,

multi-gas, and CCR dives for 24 hours if you violate a decompression ceiling for more than three minutes.

NOTE: You can still disable the decompression lockout feature after violating a decompression ceiling.

6 Diving

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Descent G1 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Descent G1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info