Bedienungsanleitung Garmin Descent Mk2S (Seite 35 von 156) (Englisch)

801348

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Dive Terminology

Central nervous system (CNS): A measure of central nervous system oxygen toxicity caused by exposure to

increased partial pressure of oxygen (PO2) while diving.

Closed-circuit rebreather (CCR): A diving mode used for dives performed with a rebreather that recirculates

exhaled gas and removes carbon dioxide.

Maximum operating depth (MOD): The greatest depth at which a breathing gas can be used before the partial

pressure of oxygen (PO2) exceeds the safe limit.

No decompression limit (NDL): A dive that does not require decompression time while ascending to the

surface.

Oxygen toxicity units (OTU): A measure of pulmonary oxygen toxicity caused by exposure to increased partial

pressure of oxygen (PO2) while diving. One OTU is equivalent to breathing 100% oxygen at 1 ATM for 1

minute.

Partial pressure of oxygen (PO2): The pressure of the oxygen in the breathing gas, based on depth and oxygen

percentage.

Surface interval (SI): The amount of time that has elapsed since the completion of the last dive.

Time to surface (TTS): The estimated amount of time it will take to ascend to the surface, including

decompression stops.

Activities and Apps

Your watch can be used for indoor, outdoor, athletic, and fitness activities. When you start an activity, the watch

displays and records sensor data. You can create custom activities or new activities based on default activities

(Creating a Custom Activity, page30). When you finish your activities, you can save and share them with the

Garmin Connect™ community.

You can also add Connect IQ™ activities and apps to your watch using the Connect IQ app (Connect IQ Features,

page52).

For more information about activity tracking and fitness metric accuracy, go to garmin.com/ataccuracy.

Starting an Activity

When you start an activity, GPSturns on automatically (if required).

1From the watch face, press START.

2Select an option:

• Select an activity from your favorites.

• Select , and select an activity from the extended activity list.

3If the activity requires GPS signals, go outside to an area with a clear view of the sky, and wait until the watch

is ready.

The watch is ready after it establishes your heart rate, acquires GPSsignals (if required), and connects to

your wireless sensors (if required).

4Press START to start the activity timer.

The watch records activity data only while the activity timer is running.

Tips for Recording Activities

• Charge the watch before starting an activity (Charging the Watch, page5).

• Press LAP to record laps, start a new set or pose, or advance to the next workout step.

• Press UP or DOWN to view additional data screens.

• Hold MENU, and select Power Mode to use a power mode to extend battery life (Customizing Power Modes,

page118).

Activities and Apps 27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Descent Mk2S Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Descent Mk2S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info