Bedienungsanleitung Garmin Dezl 570 serie (Seite 24 von 28) (Englisch)

674214

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Charging the Device

NOTE: This Class III product shall be powered by an LPS power

supply.

You can charge the battery in the device using any of these

methods.

• Connect the device to the vehicle power cable.

• Connect the device to a computer using a USB cable.

The device may charge slowly when connected to a

computer. Some portable computers may not charge the

device.

• Connect the device to an optional power adapter accessory,

such as a wall power adapter.

You can purchase an approved Garmin AC-DC adapter

suitable for home or office use from a Garmin dealer or

www.garmin.com.

Changing the Fuse in the Vehicle Power Cable

NOTICE

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

Rotate the end piece

90 degrees counter clockwise to

unlock it.

TIP: You may need to use a coin to remove the end piece.

Remove the end piece, the silver tip

, and the fuse

Insert a new fast-blow fuse that has the same current, such

as 1 A or 2 A.

Place the silver tip in the end piece.

Push in the end piece and rotate it 90 degrees clockwise to

lock it back into the vehicle power cable

Mounting on Your Dashboard

NOTICE

The permanent mounting adhesive is extremely difficult to

remove after it is installed.

You can use an optional mounting disk to mount your device to

the dashboard and comply with certain state regulations. See

www.garmin.com for more information.

Clean and dry the dashboard where you are placing the disk.

Remove the backing from the adhesive on the bottom of the

disk.

Place the disk on the dashboard.

Remove the clear plastic cover from the top of the disk.

Place the suction cup mount on top of the disk.

Flip the lever down (toward the disk).

Removing the Device, Mount, and Suction

Cup

Removing the Device from the Mount

Press the release tab or button on the mount.

Tilt the device forward.

Removing the Mount from the Suction Cup

Turn the device mount to the right or left.

Apply pressure until the socket on the mount releases the

ball on the suction cup.

Removing the Suction Cup from the Windshield

Flip the lever on the suction cup toward you.

Pull the tab on the suction cup toward you.

Purchasing Additional Maps

Go to your device product page at (www.garmin.com).

Click the Maps tab.

Follow the on-screen instructions.

Purchasing Accessories

Go to http://buy.garmin.com.

Troubleshooting

The suction cup will not stay on my

windshield

Clean the suction cup and windshield with rubbing alcohol.

Dry with a clean, dry cloth.

Mount the suction cup (Connecting the Device to Vehicle

Power, page 1).

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (Navigation Settings,

page 17).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable (Changing the

Fuse in the Vehicle Power Cable, page 20).

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is in the

following temperature range: from 0° to 45°C (from 32° to

113°F).

• Verify the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness (Display Settings, page 17).

• Shorten the display timeout (Display Settings, page 17).

• Decrease the volume (Adjusting the Volume, page 1).

• Disable Bluetooth wireless technology (Disabling Bluetooth,

page 17).

• Put the device in sleep mode when not in use (Entering and

Exiting Sleep Mode, page 1).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

My device does not appear as a removable

drive on my computer

On most Windows computers, the device connects using Media

Transfer Protocol (MTP). In MTP mode, the device appears as a

portable device and not as a removable drive. MTP mode is

supported by Windows 7, Windows Vista

, and Windows XP

Service Pack 3 with Windows Media Player 10.

20 Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Dezl 570 serie Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Dezl 570 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info