Bedienungsanleitung Garmin Dezl 770 serie (Seite 24 von 28) (Englisch)

674212

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

• Maps and GPX waypoint files from myGarmin mapping

software, including MapSource

, BaseCamp

™

, and

HomePort

™

(Custom Points of Interest, page 7).

• GPI custom POI files from Garmin POI Loader (Installing POI

Loader, page 7).

About Memory Cards

You can purchase memory cards from an electronics supplier,

or purchase pre-loaded Garmin mapping software

(www.garmin.com). In addition to map and data storage, the

memory card can be used to store files such as maps, images,

geocaches, routes, waypoints, and custom POIs.

Installing a Memory Card

The device supports microSD

™

and microSDHC memory cards.

Insert a memory card into the slot on the device.

Press it in until it clicks.

Connecting the Device to Your Computer

You can connect the device to your computer using a USB

cable.

Plug the small end of the USB cable into the port on the

device.

Plug the larger end of the USB cable into a port on your

computer.

A picture of your device connected to a computer appears on

the device screen.

Depending on your computer operating system, the device

appears as either a portable device, a removable drive, or a

removable volume.

Transferring Data From Your Computer

Connect the device to your computer (Connecting the Device

to Your Computer, page 20).

Depending on your computer operating system, the device

appears as either a portable device, a removable drive, or a

removable volume.

On your computer, open the file browser.

Select a file.

Select Edit > Copy.

Browse to a folder on the device.

NOTE: For a removable drive or volume, you should not

place files in the Garmin folder.

Select Edit > Paste.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

to safely disconnect.

Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

Disconnect the cable from your computer.

Viewing GPS Signal Status

Hold for three seconds.

Power Cables

Your device can be powered various ways.

• Vehicle power cable

• USB cable

• AC adapter (optional accessory)

Charging the Device

NOTE: This Class III product shall be powered by an LPS power

supply.

You can charge the battery in the device using any of these

methods.

• Connect the device to the vehicle power cable.

• Connect the device to a computer using a USB cable.

The device may charge slowly when connected to a

computer. Some portable computers may not charge the

device.

• Connect the device to an optional power adapter accessory,

such as a wall power adapter.

You can purchase an approved Garmin AC-DC adapter

suitable for home or office use from a Garmin dealer or

www.garmin.com.

Changing the Fuse in the Vehicle Power Cable

NOTICE

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

Rotate the end piece

90 degrees counter clockwise to

unlock it.

TIP: You may need to use a coin to remove the end piece.

Remove the end piece, the silver tip

, and the fuse

Insert a new fast-blow fuse that has the same current, such

as 1 A or 2 A.

Place the silver tip in the end piece.

Push in the end piece and rotate it 90 degrees clockwise to

lock it back into the vehicle power cable

Mounting on Your Dashboard

NOTICE

The permanent mounting adhesive is extremely difficult to

remove after it is installed.

You can use an optional mounting disk to mount your device to

the dashboard and comply with certain state regulations. See

www.garmin.com for more information.

Clean and dry the dashboard where you are placing the disk.

Remove the backing from the adhesive on the bottom of the

disk.

Place the disk on the dashboard.

Remove the clear plastic cover from the top of the disk.

Place the suction cup mount on top of the disk.

Flip the lever down (toward the disk).

Removing the Device, Mount, and Suction

Cup

Removing the Device from the Mount

Press the release button on the bottom of the device.

Tilt the device forward.

Removing the Mount from the Suction Cup

Turn the device mount to the right or left.

20 Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Dezl 770 serie Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Dezl 770 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info