Bedienungsanleitung Garmin dezlCam (Seite 20 von 30) (Englisch)

674031

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Place your headset and your Bluetooth device within 33 ft.

(10 m) of each other.

On your device, enable Bluetooth wireless technology.

On your headset, enable Bluetooth wireless technology and

make it visible to other Bluetooth devices.

Select Settings > Bluetooth.

Follow the on-screen instructions.

Your device sends navigation prompts to your headset as you

navigate a route.

About Hands-Free Calling

NOTE: While most phones and headsets are supported and can

be used, it cannot be guaranteed that a particular phone or

headset can be used. All features may not be available for your

phone.

Using Bluetooth wireless technology, your device can connect to

your mobile phone and wireless headset or helmet to become a

hands-free device. To determine whether your device with

Bluetooth technology is compatible with your device, go to

www.garmin.com/bluetooth.

Pairing Your Phone

Place your phone and your dēzlCam device within 33 ft.

(10 m) of each other.

On your phone, enable Bluetooth wireless technology, and

set the phone to be discoverable.

On your dēzlCam device, select Settings > Bluetooth.

Follow the on-screen instructions on your phone and your

dēzlCam device.

Tips After Pairing the Devices

• After the initial pairing, the two devices can connect

automatically each time you turn them on.

• When your phone is connected to your device, you are ready

to receive voice calls.

• When you turn on the device, it tries to connect to the last

phone to which it was connected.

• You might need to set your phone to connect to the device

automatically when the device is turned on.

Placing a Call

Dialing a Number

Select Apps > Phone > Dial.

Enter the number.

Select Dial.

Calling a Contact in Your Phone Book

Your phone book is loaded from your phone to the device each

time your phone and the device connect. It may take a few

minutes for the phone book to be available. Some phones do

not support this feature.

Select Apps > Phone > Phone Book.

Select a contact.

Select Call.

Calling a Location

Select Apps > Phone > Browse Categories.

Select a point of interest.

Select Call.

Receiving a Call

When you receive a call, select Answer or Ignore.

Using the Call History

Your call history is loaded from your phone to the device each

time your phone and the device connect. It may take a few

minutes for the call history to be available. Some phones do not

support this feature.

Select Apps > Phone > Call History.

Select a category.

A list of calls appears, with the most recent calls at the top.

Select a call.

Using In-Call Options

While on a call, you can select in-call options from the map.

• To transfer audio to your phone, select .

TIP: You can use this feature if you want to turn off your

device and remain on the call, or if you need privacy.

• To use the dial pad, select .

TIP: You can use this feature to use automated systems,

such as voice mail.

• To mute the microphone, select .

• To hang up, select .

Saving a Home Phone Number

TIP: After you save a home number, you can edit the home

number by editing “Home” in your list of saved locations (Editing

a Saved Location, page 9).

Select Apps > Phone > > Set Home Number.

Enter your phone number.

Select Done.

Calling Home

Before you can call home, you must enter a phone number for

your home location.

Select Apps > Phone > Call Home.

Pairing Additional Bluetooth Devices

Place your headset or phone and your Bluetooth device

within 33 ft. (10 m) of each other.

On your device, enable Bluetooth wireless technology.

On your headset or phone, enable Bluetooth wireless

technology and make it visible to other Bluetooth devices.

On your device, select Settings > Bluetooth > Search for

Devices.

A list of nearby Bluetooth devices appears.

Select your headset or phone from the list.

Select OK.

Disconnecting a Bluetooth Device

You can temporarily disconnect a Bluetooth device without

deleting it from the paired devices list. The Bluetooth device can

still connect to your dēzlCam device automatically in the future.

Select Settings > Bluetooth.

Select the device you want to disconnect.

Clear the device check box.

Deleting a Paired Bluetooth Device

You can delete a paired Bluetooth device to prevent it from

automatically connecting to your dēzlCam device in the future.

Select Settings > Bluetooth.

Select the device to delete.

Select Unpair device.

16 Hands-Free Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin dezlCam Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin dezlCam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info