650673
6
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
Garmin Drive 60 Device Overview
À
Power key
Á
Mini-USB power and data port
Â
Map and data memory card slot
Connecting the Device to Vehicle Power
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Before you use your device on battery power, you should charge
it.
1
Plug the vehicle power cable
À
into the USB port on the
device.
2
Press the mount
Á
onto the suction cup
Â
until it snaps into
place.
3
Press the suction cup to the windshield, and flip the lever
Ã
back toward the windshield.
4
Fit the tab on the top of the mount into the slot on the back of
the device.
5
Press the bottom of the mount into the device until it clicks.
6
Plug the other end of the vehicle power cable into a power
outlet in your vehicle.
Turning the Device On or Off
To turn the device on, press the power key, or connect the
device to power.
To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location.
in the status bar indicates the satellite signal strength. The time
required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go outdoors to an open area, away from tall
buildings and trees.
When turns green, the device has acquired satellite signals
and is ready for navigation.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information (Viewing GPS Signal Status, page 14).
Current time. Select to set the time (Setting the Time,
page 12).
Battery charge level.
Using the On-Screen Buttons
On-screen buttons allow you to navigate the pages, menus, and
menu options on your device.
Select to return to the previous menu screen.
Hold to quickly return to the main menu.
Select or to scroll through lists or menus.
Hold or to scroll faster.
Select to see a context-based menu of options for the
current screen.
Adjusting the Volume
1
Select Volume.
2
Select an option:
Use the slider bar to adjust the volume.
Select to mute the device.
Select for additional options.
Adjusting the Screen Brightness
1
Select Settings > Display > Brightness.
2
Use the slider bar to adjust the brightness.
Driver Awareness Features and Alerts
NOTICE
The driver alerts and speed limit features are for information
only and do not replace your responsibility to abide by all posted
speed limit signs and to use safe driving judgment at all times.
Garmin is not responsible for any traffic fines or citations you
receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer
driving and increase efficiency, even when you are driving in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone or message for each type of alert. Not all alerts
are available in all areas.
2 Driver Awareness Features and Alerts
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

garmin-drive-40

Suche zurücksetzen

  • Mein Navi geht aus
    Kann man das Akku ?? wechseln?? Eingereicht am 26-2-2023 13:46

    Antworten Frage melden
  • Das Navi schaltet sich aus
    Kann das Akku nicht mehr okay ist?
    Kann man das wechseln??
    Lg Eingereicht am 26-2-2023 13:40

    Antworten Frage melden
  • Wie kann ich eine im Moment durchgeführte Initialisierung beenden? Eingereicht am 3-9-2021 08:30

    Antworten Frage melden
  • Hat das Navi eine Geschwindigkeitsüberwachung (Warnung vor zu schnellem Fahren) und Stauumfahrungen? Eingereicht am 26-11-2020 21:19

    Antworten Frage melden
  • Kann man auch die km der zu fahrenden Strecke anzeigen Eingereicht am 21-6-2020 10:18

    Antworten Frage melden
  • Mir fehlt die Beschreibung für Garmin Drive 6l EUROPE LMT-S wer kann mir helfen ? Eingereicht am 1-3-2020 16:55

    Antworten Frage melden
  • Ich möchte das Navi Germin Drive 40 auf Deutsch einstellen Eingereicht am 14-8-2019 22:08

    Antworten Frage melden
  • Ich möchte gerne mit meinem GARMIN-Navi nach der Zieleingabe die Strassenfolge ansehen. Wie mache ich das? Eingereicht am 28-8-2018 15:02

    Antworten Frage melden
  • muss ich mein Garmin Drive 40 registrieren lassen Eingereicht am 22-7-2018 18:44

    Antworten Frage melden
  • ich habe heute das Navigationsgerät von Garmin gekauft und möchte den Akku aufladen.
    wo bitteschön lade ich diesen auf, um einige Adressen zu speichern? Es ist gerade am Computer angeschlossen und lädt nicht - was tun? Eingereicht am 18-11-2017 20:33

    Antworten Frage melden
  • Wie kann ich mein Garmin Drive 40 auf dem Computer installieren? Eingereicht am 16-11-2017 17:17

    Antworten Frage melden
  • Ich benötige das Handbuch zu garmin drive 40/nüvi 2517 LMT Eingereicht am 16-7-2017 19:57

    Antworten Frage melden
  • Wie stelle ich z.B. Schnellste oder Kürzeste Route ein Eingereicht am 29-6-2017 14:24

    Antworten Frage melden
  • wie stelle ich die Sprache Deutsch für Garmin drive 40 ein ? Eingereicht am 27-6-2017 10:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Drive 40 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Garmin Drive 40

Garmin Drive 40 Bedienungsanleitung - Deutsch - 24 seiten

Garmin Drive 40 Bedienungsanleitung - Holländisch - 22 seiten

Garmin Drive 40 Bedienungsanleitung - Französisch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info