Bedienungsanleitung Garmin Drive Luxe 50 (Seite 20 von 26) (Englisch)

650677

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Calculation Mode: Sets the route calculation method.

Fatigue Warning: Alerts you when you have been driving for a

long period without a break.

Avoidances: Sets road features to avoid on a route.

Custom Avoidances: Allows you to avoid specific roads or

areas.

Environmental Zones: Sets the avoidance preferences for

areas with environmental or emissions restrictions that may

apply to your vehicle.

Toll Roads: Sets preferences for avoiding toll roads.

Tolls and Fees: Sets preferences for avoiding toll roads and toll

stickers.

NOTE: This feature is not available in all areas.

Restricted Mode: Disables all functions that require significant

operator attention and could become a distraction while

driving.

GPS Simulator: Stops the device from receiving a GPS signal,

and saves battery power.

Calculation Mode Settings

Select Settings > Navigation > Calculation Mode.

The route calculation is based on road speeds and vehicle

acceleration data for a given route.

Faster Time: Calculates routes that are faster to drive but can

be longer in distance.

Shorter Distance: Calculates routes that are shorter in distance

but can take more time to drive.

Off Road: Calculates a direct line from your location to your

destination.

Setting a Simulated Location

If you are indoors or not receiving satellite signals, you can use

the GPS to set a simulated location.

Select Settings > Navigation > GPS Simulator.

From the main menu, select View Map.

Tap the map twice to select an area.

The address of the location appears at the bottom of the

screen.

Select the location description.

Select Set Location.

Backup Camera Settings

The backup camera settings allow you to manage paired

Garmin backup cameras and camera settings. This menu

appears on your navigation device only when the device is

connected to a wireless camera receiver cable. See the owner's

manual for your backup camera for detailed information about

pairing cameras and camera settings. Go to garmin.com

/backupcamera to purchase a Garmin backup camera.

Select Settings > Backup Camera, and select a paired camera.

Unpair: Removes the paired camera. You must pair the camera

again before you can view it using this device and cable.

Rename: Allows you to rename the paired camera.

Guidance Lines: Shows or hides guidance lines and allows you

to adjust the position of the guidance lines.

babyCam Settings

The babyCam settings allow you to manage paired Garmin

babyCam

™

cameras and camera settings. This menu appears

on your navigation device only when the device is connected to

a wireless camera receiver cable. See the owner's manual for

your camera for detailed information about pairing cameras and

camera settings. Go to garmin.com/babycam to purchase a

Garmin babyCam camera.

Select Settings > babyCam, and select a paired camera.

Power Settings: Allows you to set the amount of time the video

appears on the screen.

Flip Video: Allows you to flip or mirror the video.

Alignment: Displays the babyCam video to help you align the

camera.

Check Seat Reminder: Enables a reminder to check for rear

seat passengers before exiting the vehicle.

Unpair: Removes the paired camera.

Rename: Allows you to rename the paired camera.

Bluetooth Settings

Select Settings > Bluetooth.

Bluetooth: Enables Bluetooth wireless technology.

Search for Devices: Searches for nearby Bluetooth devices.

Friendly Name: Allows you to enter a friendly name that

identifies your device on other devices with Bluetooth

wireless technology.

Disabling Bluetooth

Select Settings > Bluetooth.

Select Bluetooth.

Display Settings

Select Settings > Display.

Color Mode: Allows you to select day or night color mode. If you

select the Auto option, the device automatically switches to

day or night colors based on the time of day.

Brightness: Allows you to adjust the display brightness.

Display Timeout: Allows you to set the amount of idle time

before your device enters sleep mode while using battery

power.

Screenshot: Allows you to take a picture of the device screen.

Screenshots are saved in the Screenshot folder of the device

storage.

Traffic Settings

From the main menu, select Settings > Traffic.

Traffic: Enables traffic.

Current Provider: Sets the traffic provider to use for traffic data.

The Auto option selects the best available traffic data

automatically.

Subscriptions: Lists the current traffic subscriptions.

Optimize Route: Enables the device to use optimized alternate

routes automatically or upon request (Avoiding Traffic Delays

on Your Route, page 5).

Traffic Alerts: Sets the traffic delay severity for which the

device displays a traffic alert.

Units and Time Settings

To open the Units and Time settings page, from the main menu,

select Settings > Units & Time.

Current Time: Sets the device time.

Time Format: Allows you to select a 12-hour, 24-hour, or UTC

display time.

Units: Sets the unit of measure used for distances.

Position Format: Sets the coordinate format and datum used

for geographical coordinates.

Setting the Time

From the main menu, select the time.

16 Customizing the Device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Drive Luxe 50 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Drive Luxe 50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info