Bedienungsanleitung Garmin DriveAssist 50 (Seite 25 von 30) (Englisch)

650682

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

If your device is not connected to an ignition-switched vehicle

power outlet, you should turn off the device when your

vehicle is not in use to prevent the dash camera from

recording unneeded footage.

• Transfer saved video footage to a computer.

The memory card lasts longer when more free space is

available on the card.

• Use a high-quality memory card with a speed rating of class

10 or higher.

Purchase your replacement memory card from a high-quality

manufacturer and a reputable vendor.

The suction cup will not stay on my

windshield

Clean the suction cup and windshield with rubbing alcohol.

Dry with a clean, dry cloth.

Mount the suction cup (Connecting the Device to Vehicle

Power, page 2).

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (Navigation Settings,

page 18).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable (Changing the

Fuse in the Vehicle Power Cable, page 20).

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is within the

charging temperature range indicated in the specifications.

• Verify the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness (Display Settings, page 19).

• Shorten the display timeout (Display Settings, page 19).

• Decrease the volume (Adjusting the Volume, page 2).

• Disable Bluetooth wireless technology (Disabling Bluetooth,

page 18).

• Put the device in power saving mode when not in use

(Turning the Device On or Off, page 2).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

My device does not appear as a removable

drive on my computer

On most Windows computers, the device connects using Media

Transfer Protocol (MTP). In MTP mode, the device appears as a

portable device and not as a removable drive. MTP mode is

supported by Windows 7, Windows Vista

, and Windows XP

Service Pack 3 with Windows Media Player 10.

My device does not appear as a portable

device on my computer

On Mac computers and some Windows computers, the device

connects using USB mass storage mode. In USB mass storage

mode, the device appears as a removable drive or volume, and

not as a portable device. Windows versions prior to Windows XP

Service Pack 3 use USB mass storage mode.

My device does not appear as either a

portable device or a removable drive or

volume on my computer

Disconnect the USB cable from your computer.

Turn off the device.

Connect the USB cable to your device and to a USB port on

your computer.

TIP: The USB cable must connect to a USB port on your

computer, not to a USB hub.

The device turns on automatically and goes into MTP mode or

USB mass storage mode. A picture of the device connected to a

computer appears on the device screen.

NOTE: If you have several network drives mapped on your

computer, Windows may have trouble assigning drive letters to

your Garmin drives. For information about assigning drive

letters, see the help file for your operating system.

My phone will not connect to the device

• Select Settings > Bluetooth.

The Bluetooth field must be set to Enabled.

• Enable Bluetooth wireless technology on your phone and

bring your phone within 33 ft. (10 m) of the device.

• Go to www.garmin.com/bluetooth for more help.

Appendix

Installing a Memory Card for Maps and Data

You can install a memory card to increase the storage space for

maps and other data on your device. You can purchase memory

cards from an electronics supplier, or go to www.garmin.com

/maps to purchase a memory card with pre-loaded Garmin

mapping software. The device supports microSD memory cards

from 4 to 32 GB.

Locate the map and data memory card slot on your device

(Garmin DriveAssist Device Overview, page 1).

Insert a memory card into the slot.

Press it in until it clicks.

Data Management

You can store files on your device. The device has a memory

card slot for additional data storage.

NOTE: The device is not compatible with Windows 95, 98, Me,

Windows NT

, and Mac OS 10.3 and earlier.

About Memory Cards

You can purchase memory cards from an electronics supplier,

or purchase pre-loaded Garmin mapping software

(www.garmin.com). In addition to map and data storage, the

memory card can be used to store files such as maps, images,

geocaches, routes, waypoints, and custom POIs.

Connecting the Device to Your Computer

You can connect the device to your computer using a USB

cable.

Plug the small end of the USB cable into the port on the

device.

Plug the larger end of the USB cable into a port on your

computer.

A picture of your device connected to a computer appears on

the device screen.

Depending on your computer operating system, the device

appears as either a portable device, a removable drive, or a

removable volume.

Appendix 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin DriveAssist 50 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin DriveAssist 50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info