Bedienungsanleitung Garmin DriveAssist 50LMT (Seite 7 von 30) (Englisch)

650681

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Enabling Automatic Volume

Your device can increase or decrease the volume automatically

based on the level of background noise.

Select Volume > .

Select Automatic Volume.

Using the Audio Mixer

You can use the audio mixer to set the volume levels for

different audio types, such as navigation prompts or phone calls.

The level for each audio type is a percentage of the master

volume.

Select Volume.

Select > Audio Mixer.

Use the sliders to adjust the volume for each audio type.

Adjusting the Screen Brightness

Select Settings > Display > Brightness.

Use the slider bar to adjust the brightness.

Dash Camera

Aligning the Camera

WARNING

Do not attempt to align the camera while driving.

You should align the dash camera each time you mount or

reposition the device. The advanced driver assistance features

may not perform properly if the camera is not aligned.

Select Settings > Camera > > Alignment.

Tilt the device and turn the camera left or right to align the

camera.

The crosshairs should point straight ahead, and the horizon

line should be centered between the top and bottom of the

screen.

Dash Camera Recording

NOTICE

Legal Restrictions

In some jurisdictions it could be considered an invasion of

privacy rights to take or publicly display photographs or videos

of people or their vehicles using this product. It is your

responsibility to know and comply with applicable laws and

rights to privacy in your jurisdiction.

Before you can record video, you must install a camera memory

card (Installing the Dash Camera Memory Card, page 2).

By default, the device immediately starts recording video when it

turns on. It continues recording, overwriting the oldest, non-

saved video until it turns off. While recording, the LED is solid

red.

Saving a Video Recording

By default, the device uses a sensor to detect possible

accidental collisions and saves video footage before, during,

and after the detected event.

You can also manually save video at any time.

While recording, select Apps > Dash Cam > .

The device saves a photo and the video footage before,

during, and after you select .

Select again to extend the saved recording time (optional).

A message indicates the amount of video footage to be

saved.

The memory card has limited storage. After you save a video

recording, you should transfer the recording to your computer or

other external storage location for permanent storage (Videos

and Photos on Your Computer, page 3).

Taking a Photo

You can take still photographs with this device. By default, the

device stores time and location information with the photo.

Select Apps > Dash Cam > .

The device takes a photo and saves it to the memory card.

Stopping or Starting Dash Camera Recording

Select Apps > Dash Cam.

Select an option:

• To stop recording, select .

TIP: By default, recording starts automatically the next

time you turn on the device. You can disable this option in

the camera settings (Camera Settings, page 18).

• To start recording, select .

Viewing Videos and Photos

NOTE: The device stops recording video while you view videos

or photos.

Select Apps > Gallery > Yes.

Select a video or photo.

The device displays the video or photo. Videos start playing

automatically. If the video or photo includes location

information, a map shows the location.

Videos and Photos on Your Computer

The Garmin Dash Cam Player application allows you to view,

save, and edit recorded videos on your computer. You can also

view and overlay time, date, location, and speed information

recorded with the video. Go to www.garmin.com/dashcamplayer

for more information.

Deleting a Video or Photo

Select Apps > Gallery > Yes.

Select a video or photo.

Select > Yes.

Driver Awareness Features and Alerts

NOTICE

The driver alerts and speed limit features are for information

only and do not replace your responsibility to abide by all posted

speed limit signs and to use safe driving judgment at all times.

Garmin is not responsible for any traffic fines or citations you

receive for failing to follow all applicable traffic laws and signs.

Your device provides features that can help encourage safer

driving and increase efficiency, even when you are driving in a

familiar area. The device plays an audible tone or message and

displays information for each alert. You can enable or disable

the audible tone or message for each type of alert. Not all alerts

are available in all areas.

School zone or nearby school: The device plays a tone and

displays the distance to and speed limit (if available) for an

upcoming school or school zone.

Speed limit reduction: The device plays a tone and displays

the upcoming reduced speed limit so you can be prepared to

reduce your speed.

Speed limit exceeded: The device plays a tone and displays a

red border on the speed limit icon when you exceed the

posted speed limit for the current road.

Wrong way on a one-way street: The device plays a message

and displays a full-screen warning if you travel the wrong way

on a one-way street. The edges of the screen appear red and

Dash Camera 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin DriveAssist 50LMT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin DriveAssist 50LMT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info