Bedienungsanleitung Garmin DriveAssist 50LMT (Seite 24 von 30) (Englisch)

650681

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Device Maintenance

Device Care

NOTICE

Avoid dropping your device.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touchscreen, or

damage may result.

Do not expose the device to water.

Cleaning the Camera Lens

NOTICE

Do not use a dry cloth to clean the lens. Use of a dry cloth may

damage the lens.

Avoid chemical cleaners and solvents that can damage plastic

components.

You should clean the camera lens regularly to improve the

quality of recorded video.

Wipe the lens with a soft, non-scratch cloth dampened with

water or alcohol.

Allow the lens to air dry.

Cleaning the Outer Casing

NOTICE

Avoid chemical cleaners and solvents that can damage plastic

components.

Clean the outer casing of the device (not the touchscreen)

using a cloth dampened with a mild detergent solution.

Wipe the device dry.

Cleaning the Touchscreen

Use a soft, clean, lint-free cloth.

If necessary, lightly dampen the cloth with water.

If using a dampened cloth, turn off the device and disconnect

the device from power.

Gently wipe the screen with the cloth.

Avoiding Theft

• Remove the device and mount from sight when not in use.

• Remove the residue left on the windshield by the suction cup.

• Do not keep your unit in the glove compartment.

• Register your device at http://my.garmin.com.

Resetting the Device

You can reset your device if it stops functioning.

Hold the power key for 12 seconds.

Removing the Device, Mount, and Suction

Cup

Removing the Device from the Mount

Press the release tab or button on the mount.

Tilt the device forward.

Removing the Mount from the Suction Cup

Turn the device mount to the right or left.

Apply pressure until the socket on the mount releases the

ball on the suction cup.

Removing the Suction Cup from the Windshield

Flip the lever on the suction cup toward you.

Pull the tab on the suction cup toward you.

Changing the Fuse in the Vehicle Power

Cable

NOTICE

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

Rotate the end piece

90 degrees counter clockwise to

unlock it.

TIP: You may need to use a coin to remove the end piece.

Remove the end piece, the silver tip

, and the fuse

Insert a new fast-blow fuse that has the same current, such

as 1 A or 2 A.

Place the silver tip in the end piece.

Push in the end piece and rotate it 90 degrees clockwise to

lock it back into the vehicle power cable

Troubleshooting

My video recordings are blurry

• Clean the camera lens (Cleaning the Camera Lens,

page 20).

• Clean the windshield in front of the camera.

• Verify the area of the windshield in front of the camera is

cleared by the windshield wipers, and move the device, if

necessary.

My video recordings are choppy or

incomplete

• For the best camera and video results, use a high-quality

memory card with a speed rating of class 10 or higher.

A slower memory card may not record video quickly enough.

• If the device displays a memory card error alert, replace the

memory card (Installing the Dash Camera Memory Card,

page 2).

• Update your device to the latest software (Updating Maps

and Software with Garmin Express, page 1).

How can I extend the life of my camera

memory card?

All microSD memory cards wear out after they are overwritten a

large number of times. Because the dash camera records

continuously, you should replace the memory card occasionally

(Installing the Dash Camera Memory Card, page 2). Your device

detects memory card errors automatically and alerts you when it

is time to replace your memory card.

You can take these actions to help extend the life of the memory

card.

• Turn off the device when your vehicle is not in use.

20 Device Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin DriveAssist 50LMT Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin DriveAssist 50LMT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info