Bedienungsanleitung Garmin DriveTrack 70 (Seite 6 von 24) (Englisch)

657469

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Press the mount

onto the suction cup

until it snaps into

place.

Press the suction cup to the windshield, and flip the lever

back toward the windshield.

Fit the tab on the top of the mount into the slot on the back of

the device.

Press the bottom of the mount into the device until it clicks.

Plug the other end of the vehicle power cable into a power

outlet in your vehicle.

Turning the Device On or Off

• To turn the device on, press the power key, or connect the

device to power.

• To put the device in power saving mode, press the power key

while the device is on.

While in power saving mode, the screen is off and the device

uses very little power, but it can wake instantly for use.

TIP: You can charge your device faster by putting it in power

saving mode while charging the battery.

• To turn off the device completely, hold the power key until a

prompt appears on the screen, and select Off.

The prompt appears after five seconds. If you release the

power key before the prompt appears, the device enters

power saving mode.

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver

must collect satellite data and establish the current location.

in the status bar indicates the satellite signal strength. The time

required to acquire satellite signals varies based on several

factors, including how far you are from the location where you

last used your navigation device, whether you have a clear view

of the sky, and how long it has been since you last used your

navigation device. The first time you turn on your navigation

device, it may take several minutes to acquire satellite signals.

Turn on the device.

Wait while the device locates satellites.

If necessary, go outdoors to an open area, away from tall

buildings and trees.

When turns green, the device has acquired satellite signals

and is ready for navigation.

Status Bar Icons

The status bar is located at the top of the main menu. The status

bar icons display information about features on the device. You

can select some icons to change settings or view additional

information.

GPS signal status. Hold to view GPS accuracy and acquired

satellite information (Viewing GPS Signal Status, page 16).

Bluetooth

technology status. Select to view the Bluetooth

settings (Bluetooth Settings, page 13).

Connected to hands-free calling. Select to place a phone call

(Hands-Free Calling, page 12).

Active transportation mode. Select to change the

transportation mode (Transportation Mode Settings,

page 12).

Current time. Select to set the time (Setting the Time,

page 13).

Battery charge level.

Temperature. Select to view the weather forecast.

Using the On-Screen Buttons

On-screen buttons allow you to navigate the pages, menus, and

menu options on your device.

• Select to return to the previous menu screen.

• Hold to quickly return to the main menu.

• Select or to scroll through lists or menus.

• Hold or to scroll faster.

• Select to see a context-based menu of options for the

current screen.

Adjusting the Volume

Select Volume.

Select an option:

• Use the slider bar to adjust the volume.

• Select to mute the device.

• Select for additional options.

Enabling Automatic Volume

Your device can increase or decrease the volume automatically

based on the level of background noise.

Select Volume > .

Select Automatic Volume.

Using the Audio Mixer

You can use the audio mixer to set the volume levels for

different audio types, such as navigation prompts or phone calls.

The level for each audio type is a percentage of the master

volume.

Select Volume.

Select > Audio Mixer.

Use the sliders to adjust the volume for each audio type.

Adjusting the Screen Brightness

Select Settings > Display > Brightness.

Use the slider bar to adjust the brightness.

Driver Awareness Features and Alerts

NOTICE

The driver alerts and speed limit features are for information

only and do not replace your responsibility to abide by all posted

speed limit signs and to use safe driving judgment at all times.

Garmin is not responsible for any traffic fines or citations you

receive for failing to follow all applicable traffic laws and signs.

Your device provides features that can help encourage safer

driving and increase efficiency, even when you are driving in a

familiar area. The device plays an audible tone or message and

displays information for each alert. You can enable or disable

the audible tone or message for each type of alert. Not all alerts

are available in all areas.

School zone or nearby school: The device plays a tone and

displays the distance to and speed limit (if available) for an

upcoming school or school zone.

2 Driver Awareness Features and Alerts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin DriveTrack 70 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info