Bedienungsanleitung Garmin DriveTrack 71 (Seite 5 von 30) (Englisch)

691410

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Getting Started

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

• Update the maps and software on your device (Map and

Software Updates, page 20).

• Mount the device in your vehicle and connect it to power

(Mounting and Powering the Garmin DriveTrack Device in

Your Vehicle, page 1).

• Acquire GPS signals (Acquiring GPS Signals, page 1).

• Adjust the volume (Adjusting the Volume, page 2) and

display brightness (Adjusting the Screen Brightness,

page 2).

• Navigate to your destination (Starting a Route, page 3).

Garmin DriveTrack 71 Device Overview

Power key

USB power and data port

Map and data memory card slot

Microphone for Voice Command or hands-free calling

Mounting and Powering the Garmin

DriveTrack Device in Your Vehicle

WARNING

This product contains a lithium-ion battery. To prevent the

possibility of personal injury or product damage caused by

battery exposure to extreme heat, store the device out of direct

sunlight.

Before you use your device on battery power, you should charge

it.

Plug the vehicle power cable

into the USB port on the

device.

Press the mount

onto the suction cup

until it snaps into

place.

Press the suction cup to the windshield, and flip the lever

back toward the windshield.

Fit the tab on the top of the mount into the slot on the back of

the device.

Press the bottom of the mount into the device until it clicks.

Plug the other end of the vehicle power cable into a power

outlet in your vehicle.

Turning the Device On or Off

• To turn the device on, press the power key, or connect the

device to power.

• To put the device in power saving mode, press the power key

while the device is on.

While in power saving mode, the screen is off and the device

uses very little power, but it can wake instantly for use.

TIP: You can charge your device faster by putting it in power

saving mode while charging the battery.

• To turn off the device completely, hold the power key until a

prompt appears on the screen, and select Off.

The prompt appears after five seconds. If you release the

power key before the prompt appears, the device enters

power saving mode.

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver

must collect satellite data and establish the current location. The

time required to acquire satellite signals varies based on several

factors, including how far you are from the location where you

last used your navigation device, whether you have a clear view

of the sky, and how long it has been since you last used your

navigation device. The first time you turn on your navigation

device, it may take several minutes to acquire satellite signals.

Turn on the device.

Wait while the device locates satellites.

If necessary, go to an open area, away from tall buildings and

trees.

in the status bar indicates the satellite signal strength. When

at least half the bars are filled, the device is ready for navigation.

Status Bar Icons

The status bar is located at the top of the main menu. The status

bar icons display information about features on the device. You

can select some icons to change settings or view additional

information.

GPS signal status. Hold to view GPS accuracy and acquired

satellite information (Viewing GPS Signal Status, page 23).

Bluetooth

technology status. Select to view the Bluetooth

settings (Wireless Network Settings, page 19).

Wi-fi signal strength. Select to change the wi-fi settings

(Wireless Network Settings, page 19).

Connected to hands-free calling. Select to place a phone call

(Hands-Free Calling, page 13).

Current time. Select to set the time (Setting the Time,

page 19).

Battery charge level.

Sharing LiveTrack data. The number of invited viewers

appears on the icon. Select to open the LiveTrack app

(LiveTrack, page 16).

Smartphone Link status. Select to connect to the

Smartphone Link app and receive live traffic data and other

live services (Pairing with Your Phone and Connecting to

Smartphone Link, page 11).

Temperature. Select to view the weather forecast (Viewing

the Weather Forecast, page 16).

Using the On-Screen Buttons

On-screen buttons allow you to navigate the pages, menus, and

menu options on your device.

• Select to return to the previous menu screen.

• Hold to quickly return to the main menu.

• Select or to scroll through lists or menus.

• Hold or to scroll faster.

Getting Started 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin DriveTrack 71 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin DriveTrack 71

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info