Bedienungsanleitung Garmin echoMAP 50dv (Seite 6 von 30) (Englisch)

590089

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Wait several minutes while the software update process

completes.

The device returns to normal operation after the software

update process is complete.

Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

GPS Satellite Signals

When you turn on the chartplotter, the GPS receiver must collect

satellite data and establish the current location. When the

chartplotter acquires satellite signals, appears at the top of

the Home screen. When the chartplotter loses satellite signals,

disappears and a flashing question mark appears over on

the chart.

For more information about GPS, go to www.garmin.com

/aboutGPS.

Adjusting the Backlight

Select Settings > System > Display > Backlight.

TIP: Press from any screen to open the backlight settings.

Adjust the backlight.

Adjusting the Color Mode

Select Settings > System > Display > Color Mode.

TIP: Press from any screen to access the color settings.

Select an option.

Customizing the Home Screen

You can add items to and rearrange items on the Home screen.

From the Home screen, select Customize Home.

Select an option:

• To rearrange an item, select Rearrange, select the item to

move, and select the new location.

• To add an item to the Home screen, select Add, and

select the new item.

• To remove an item you have added to the Home screen,

select Remove, and select the item.

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the

map data and accessories used.

You can open the charts and 3D chart views by selecting

Charts.

Navigation Chart: Shows navigation data available on your pre-

loaded maps and from supplemental maps, if available. The

data includes buoys, lights, cables, depth soundings,

marinas, and tide stations in an overhead view.

Perspective 3D: Provides a view from above and behind the

boat (according to your course) and provides a visual

navigation aid. This view is helpful when navigating tricky

shoals, reefs, bridges, or channels, and is beneficial when

trying to identify entry and exit routes in unfamiliar harbors or

anchorages.

Mariner’s Eye 3D: Shows a detailed, three-dimensional view

from above and behind the boat (according to your course)

and provides a visual navigation aid. This view is helpful

when navigating tricky shoals, reefs, bridges, or channels,

and when trying to identify entry and exit routes in unfamiliar

harbors or anchorages.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are

available with premium charts, in some areas.

Fish Eye 3D: Provides an underwater view that visually

represents the sea floor according to the chart information.

When a sonar transducer is connected, suspended targets

(such as fish) are indicated by red, green, and yellow

spheres. Red indicates the largest targets and green

indicates the smallest.

Fishing Chart: Provides a detailed view of the bottom contours

and depth soundings on the chart. This chart removes

navigational data from the chart, provides detailed

bathymetric data, and enhances bottom contours for depth

recognition. This chart is best for offshore deep-sea fishing.

Navigation Chart and Offshore Fishing Chart

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

The Navigation and Fishing charts allow you to plan your

course, view map information, and follow a route. The Fishing

chart is for offshore fishing.

To open the Navigation chart, select Charts > Navigation

Chart.

To open the Fishing chart, select Charts > Fishing Chart.

Zooming In and Out of the Chart

The zoom level is indicated by the scale number at the bottom of

the chart. The bar under the scale number represents that

distance on the chart.

• Select to zoom out.

• Select to zoom in.

Panning the Chart with the Keys

You can move the chart to view an area other than your present

location.

From the chart, use the arrow keys.

Select BACK to stop panning and return the screen to your

present location.

NOTE: To pan from a combination screen, select SELECT.

Selecting an Item on the Map Using the Device Keys

From a chart or 3D chart view, select , , , or to move

the cursor.

Select SELECT.

Measuring a Distance on the Chart

Select Measure Distance.

A push pin appears on the screen at your present location.

The distance and angle from the pin is listed in the corner.

TIP: To reset the pin and measure from the current location of

the cursor, select SELECT.

Chart Symbols

This table contains some of the common symbols you might see

on the detailed charts.

Icon Description

Buoy

Information

Marine services

2 Charts and 3D Chart Views

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin echoMAP 50dv Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info