Bedienungsanleitung Garmin echoMAP 54dv (Seite 22 von 30) (Englisch)

590093

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

vessel, and a blue flag indicates the last reported position of the

vessel.

From a chart or 3D chart view, select MENU > Other

Vessels > DSC Trails.

Select the number of hours to show tracked vessels on the

chart.

For example, if you select 4 Hours, all trail points that are

less than four hours old appear for all tracked vessels.

Individual Routine Calls

When you connect the chartplotter to a Garmin VHF radio, you

can use the chartplotter interface to set up an individual routine

call.

When setting up an individual routine call from your chartplotter,

you can select the DSC channel on which you want to

communicate. The radio transmits this request with your call.

Selecting a DSC Channel

NOTE: The selection of a DSC channel is limited to those

channels that are available in all frequency bands. The default

channel is 72. If you select a different channel, the chartplotter

uses that channel for subsequent calls until you call using

another channel.

Select Navigation Info > Other Vessels > DSC List.

Select a vessel or a station to call.

Select Call with Radio > Channel.

Select an available channel.

Making an Individual Routine Call

NOTE: When initiating a call from the chartplotter, if the radio

does not have an MMSI number programmed, the radio will not

receive call information.

Select Navigation Info > Other Vessels > DSC List.

Select a vessel or a station to call.

Select Call with Radio.

If necessary, select Channel, and select a new channel.

Select Send.

The chartplotter sends information about the call to the radio.

On your Garmin VHF radio, select Call.

Making an Individual Routine Call to an AIS Target

From a chart or 3D chart view, select an AIS target.

Select AIS Vessel > Call with Radio.

If necessary, select Channel, and select a new channel.

Select Send.

The chartplotter sends information about the call to the radio.

On your Garmin VHF radio, select Call.

Chartplotter Data Management

Copying Waypoints, Routes, and Tracks

from HomePort to a Chartplotter

Before you can copy data to the chartplotter, you must have the

latest version of the HomePort software program loaded on your

computer and a memory card installed in the chartplotter.

Copy the data from HomePort to the prepared memory card.

For more information, see the HomePort help file.

Copying Data from a Memory Card

Insert a memory card into the card slot.

Select User Data > Manage Data > Data Transfer.

If necessary, select the memory card to copy data to.

Select an option:

• To transfer data from the memory card to the chartplotter

and combine it with existing user data, select Merge from

Card.

• To transfer data from the memory card to the chartplotter

and overwrite existing user data, select Replace from

Card.

Select the file name.

Copying Waypoints, Routes, and Tracks to a

Memory Card

Insert a memory card into the card slot.

Select User Data > Manage Data > Data Transfer > Save

to Card.

If necessary, select the memory card to copy data to.

Select an option:

• To create a new file, select Add New File, and enter a

name. The file name is saved with an .adm extension.

• To add the information to an existing file, select the file

from the list.

Selecting a File Type for Third-Party

Waypoints and Routes

You can import and export waypoints and routes from third-party

devices.

Select User Data > Data Transfer > File Type.

Select GPX.

To transfer data with Garmin devices again, select the ADM file

type.

Sharing Waypoints and Routes Across

Devices

Before you can share waypoints and routes, you must connect

the devices using a data sharing cable. The data sharing cable

is an optional accessory you can purchase.

You can share waypoint and route data between two compatible

chartplotters installed on your boat. You must turn on user data

sharing for both devices to share data.

Select User Data > User Data Sharing > On on both

devices.

Copying Built-In Maps to a Memory Card

You can copy maps from the chartplotter to a memory card for

use with HomePort.

Insert a memory card into the card slot.

Select User Data > Manage Data > Data Transfer.

Select Copy Built-In Map.

Backing Up Data to a Computer

Insert a memory card into the card slot.

Select User Data > Manage Data > Data Transfer > Save

to Card.

Select a file name from the list, or select Add New File.

Select Save to Card.

The file name is saved with an .adm extension.

Remove the memory card, and insert it into a card reader

attached to a computer.

Open the Garmin\UserData folder on the memory card.

Copy the backup file on the card and paste it to any location

on the computer.

18 Chartplotter Data Management

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin echoMAP 54dv Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info