Bedienungsanleitung Garmin echoMAP 70dv (Seite 15 von 30) (Englisch)

590095

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Retracing the Active Track

The track currently being recorded is called the active track.

Select User Data > Tracks > Follow Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Clearing the Active Track

Select User Data > Tracks > Clear Active Track.

The track memory is cleared, and the active track continues

to be recorded.

Managing the Track Log Memory During Recording

Select User Data > Tracks > Active Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select User Data > Tracks > Active Track Options >

Record Interval > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Deleting All Saved Waypoints, Routes, and

Tracks

Select User Data > Manage Data > Clear User Data > All >

OK.

Auto Guidance

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

NOTE: Auto Guidance is available with premium charts, in some

areas.

You can use Auto Guidance to plot the best path to your

destination. Auto Guidance uses your chartplotter to scan chart

data, such as water depth and known obstacles, to calculate a

suggested path. You can adjust the path during navigation.

Setting and Following an Auto Guidance Path

Select a destination (Destinations).

Select Navigate To > Guide To.

Review the path, indicated by the magenta line.

Select Start Navigation.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Creating an Auto Guidance Path

Select Navigation > Routes & Auto Guidance Paths > New

> Auto Guidance.

Select SELECT, and choose a destination point.

Filtering a List of Routes and Auto Guidance Paths

You can filter a list of routes and Auto Guidance paths to quickly

find a saved destination.

Select MENU > Filter.

Select an option.

Reviewing an Auto Guidance Path

From the Navigation chart, select a path.

Select an option:

• To view a hazard and adjust the hazard path, select

Hazard Review.

• To change the path name, or to adjust or recalculate the

path, select Edit.

• To delete a path, select Delete.

• To navigate the selected path, select Navigate To.

Adjusting an Auto Guidance Path

From the Navigation chart, follow the on-screen instructions

or use the arrow keys to move the destination point to the

new location.

Select SELECT > Move Point.

Select BACK to return to the navigation screen.

Canceling an Auto Guidance Calculation in Progress

From the Navigation chart, select MENU > Cancel.

TIP: You can select BACK to quickly cancel the calculation.

Setting a Timed Arrival

You can use the Timed Arrival feature on a route or an Auto

Guidance path to get feedback regarding when you should

arrive at a selected point. This allows you to time your arrival at

a location, such as a bridge opening or a race starting line.

From the Navigation chart, select MENU.

If necessary, select Navigation Options.

Select Timed Arrival.

TIP: You can quickly open the Timed Arrival menu by

selecting a point on the Auto Guidance path.

Adjusting the Distance from Shore

The Shoreline Distance setting indicates how close to the shore

you want the Auto Guidance line to be placed. The Auto

Guidance line may move if you change this setting while

navigating. The available values for the Shoreline Distance

setting are relative, not absolute. To ensure the Auto Guidance

line is placed the appropriate distance from shore, you can

assess the placement of the Auto Guidance line using one or

more familiar destinations that require navigation through a

narrow waterway.

Dock your vessel or drop the anchor.

Select Settings > Navigation > Auto Guidance > Shoreline

Distance > Normal.

Select a destination that you have navigated to previously.

Select Navigate To > Guide To.

Navigation with a Chartplotter 11

Garmin echoMAP 70dv Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info