Bedienungsanleitung Garmin echoMAP 73dv (Seite 10 von 30) (Englisch)

590098

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Chart and 3D Chart View Settings

NOTE: Not all settings apply to all charts and 3D chart views.

Some options require premium maps or connected accessories.

These settings apply to the charts and 3D chart views, except

Fish Eye 3D (Fish Eye 3D Settings).

From a chart or a 3D chart view, select MENU.

Waypoints & Tracks: See Waypoints and Tracks Settings on

the Charts and Chart Views.

Other Vessels: See Other Vessels Settings on the Charts and

Chart Views.

Navaids: Shows navigational aids on the Fishing chart.

Chart Setup: See Navigation and Fishing Chart Setup.

Overlay Numbers: See Overlay Numbers Settings. This might

appear in the Chart Setup menu.

Chart Appearance: See Chart Appearance Settings. This might

appear in the Chart Setup menu.

Navigation and Fishing Chart Setup

NOTE: Not all settings apply to all charts and 3D chart views.

Some settings require external accessories or applicable

premium charts.

From the Navigation chart or Fishing chart, select MENU >

Chart Setup.

Satellite Photos: Shows high-resolution satellite images on the

land or on both land and sea portions of the Navigation chart,

when certain premium maps are used (Showing Satellite

Imagery on the Navigation Chart).

Water Overlay: Enables relief shading, which shows the

gradient of the bottom with shading, or sonar imagery, which

helps identify the density of the bottom. This feature is

available only with some premium maps.

Tides & Currents: Shows current station indicators and tide

station indicators on the chart (Showing and Configuring

Tides and Currents) and enables the tides and current slider,

which sets the time for which tides and currents are reported

on the map.

Roses: Shows a compass rose around your boat, indicating

compass direction oriented to the heading of the boat. A true

wind direction or apparent wind direction indicator appears if

the chartplotter is connected to a compatible marine wind

sensor. When in sailing mode, true and apparent wind are

shown on the wind rose.

Lake Level: Sets the present water level of the lake. This

feature is available only with some premium maps.

Overlay Numbers: See Overlay Numbers Settings.

Chart Appearance: See Chart Appearance Settings.

Waypoints and Tracks Settings on the Charts and

Chart Views

From a chart or a 3D chart view, select MENU > Waypoints &

Tracks.

Tracks: Shows tracks on the chart or 3D chart view.

Waypoints: Shows the list of waypoints (Viewing a List of all

Waypoints).

New Waypoint: Creates a new waypoint.

Waypoint Display: Sets how to display waypoints on the chart.

Active Tracks: Shows the active track options menu.

Saved Tracks: Shows the list of saved tracks (Viewing a List of

Saved Tracks).

Tracks Display: Sets which tracks to display on the chart based

on track color.

Overlay Numbers Settings

Edit Layout: Sets the layout of the data overlay, or data fields.

You can select the data to be shown within each data field.

Navigation Inset: Shows the navigation inset when the vessel

is navigating to a destination.

Navigation Inset Setup: Allows you to configure the navigation

inset to show Route Leg Details, and to control when the

inset appears before a turn or destination.

Compass Tape: Shows the compass tape data bar when the

vessel is navigating to a destination.

Editing the Data Fields

You can change the data shown in the overlay numbers

displayed on the charts and other screens.

From a screen that supports overlay numbers, select MENU.

If necessary, select Chart Setup.

Select Overlay Numbers > Edit Layout.

Select a layout.

Select a data field.

Select the type of data shown in the field.

Available data options vary based on the chartplotter.

Showing a Navigation Inset

You can control whether a navigation inset appears on some

chart views. The navigation inset is shown only when the boat is

navigating to a destination.

From a chart or 3D chart view, select MENU.

If necessary, select Chart Setup.

Select Overlay Numbers > Navigation Inset > Auto.

Select Navigation Inset Setup.

Complete an action:

• To show waypoint velocity made good (VMG) when

navigating a route with more than one leg, select Route

Leg Details > On.

• To show next-turn data based on distance, select Next

Turn > Distance.

• To show next-turn data based on time, select Next Turn >

Time.

• To indicate how the destination data appears, select

Destination, and select an option.

Chart Appearance Settings

You can adjust the appearance of the different charts and 3D

chart views. Each setting is specific to the chart or chart view

being used.

NOTE: Not all settings apply to all charts and 3D chart views

and chartplotter models. Some options require premium maps or

connected accessories.

From a chart or 3D chart view, select MENU > Chart Setup >

Chart Appearance.

Orientation: Sets the perspective of the map.

Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the

direction of travel, and sets the data source for the heading

line.

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when

zoomed out too far to see the detailed charts.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than the

dangerous depth are indicated by red text.

Safety Shading: Sets the shades from the shoreline to the

specified depth.

Depth Range Shading: Specifies an upper and lower depth to

shade between.

6 Charts and 3D Chart Views

Garmin echoMAP 73dv Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info